Mike, I think that should work. I don’t remember anything else except to enable it and fill in the blanks (and restart weewx). As an amateur operator you can get a passcode and I think it adds your call sign to the record. I believe you can just leave it blank. Good luck. Bob See http://www.findu.com/cgi-bin/wxpage.cgi?last=24&call=N4MRV-1 On Monday, April 21, 2025 at 6:32:23 PM UTC-4 Mike Book wrote:
> Thank you, I left the passcode blank for now. > > CWOP told me to use my callsign as my station ID in my new account email. > I got that in. > > I'm assuming now since this is in the configuration file that is it. I > don't have to do anything else? > > On Monday, April 21, 2025 at 6:19:42 PM UTC-4 bgra...@umw.edu wrote: > >> Mike, >> Here is my setup from weewx.conf >> >> [[CWOP]] >> # This section is for configuring posts to CWOP. >> >> # If you wish to post to CWOP, set the option 'enable' to true, >> # then specify the station ID (e.g., CW1234). >> enable = true >> station = N4MRV-1 >> # If this is an APRS (radio amateur) station, specify the >> # passcode (e.g., 12345). Otherwise, ignore. >> passcode = xxxx [get code from CWOP] >> Bob >> On Monday, April 21, 2025 at 1:06:31 PM UTC-4 Karen K wrote: >> >>> Mike Book schrieb am Montag, 21. April 2025 um 18:43:28 UTC+2: >>> >>> I am also wondering how do I get weewx to send to CWOP. >>> >>> >>> >>> That is quite easy as sending to CWOP is a built-in feature of WeeWX. >>> Look for the [[CWOP]] section in weewx.conf, set station and passcode >>> to the appropriate values of your station and enable to true. That's >>> all. >>> >>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion visit https://groups.google.com/d/msgid/weewx-user/c72b4099-5836-462c-9c97-1806dca9ca9en%40googlegroups.com.
