Wow 3x the price of a davis datalogger! On Sunday, January 26, 2025 at 5:34:43 PM UTC-8 scott pierce wrote:
> Awesome! Thanks! > > On Sunday, January 26, 2025 at 8:29:22 PM UTC-5 weather list wrote: > >> It plugs into the 6312 expansion port, and its connection is wi-fi to the >> local LAN. WeeWx connects using the IP assigned to the Meteobridge. I >> always configure my LAN router to assign a fixed IP to the Meteobridge >> based on the MAC address of the Meteobridge. >> ------------------------------------------------------- >> [Vantage] >> # This section is for the Davis Vantage series of weather stations. >> >> # Connection type: serial or ethernet >> # serial (the classic VantagePro) >> # ethernet (the WeatherLinkIP or Serial-Ethernet bridge) >> type = ethernet >> >> # If the connection type is serial, a port must be specified: >> # Debian, Ubuntu, Redhat, Fedora, and SuSE: >> # /dev/ttyUSB0 is a common USB port name >> # /dev/ttyS0 is a common serial port name >> # BSD: >> # /dev/cuaU0 is a common serial port name >> # port = /dev/ttyUSB0 >> >> # If the connection type is ethernet, an IP Address/hostname is >> required: >> host = 192.168.1.14 >> >> >> ###################################################### >> # The rest of this section rarely needs any attention. >> # You can safely leave it "as is." >> ###################################################### >> >> # Serial baud rate (usually 19200) >> baudrate = 19200 >> >> # TCP port (when using the WeatherLinkIP) >> # tcp_port = 22222 >> >> # TCP send delay (when using the WeatherLinkIP): >> tcp_send_delay = 0.5 >> >> # The type of LOOP packet to request: 1 = LOOP1; 2 = LOOP2; 3 = both >> loop_request = 1 >> >> # The id of your ISS station (usually 1). If you use a wind meter >> connected >> # to a anemometer transmitter kit, use its id >> iss_id = 1 >> >> # How long to wait for a response from the station before giving up >> (in >> # seconds; must be greater than 2) >> timeout = 10 >> >> # How long to wait before trying again (in seconds) >> wait_before_retry = 1.2 >> >> # How many times to try before giving up: >> max_tries = 8 >> >> # Vantage model Type: 1 = Vantage Pro; 2 = Vantage Pro2 >> model_type = 2 >> >> # The driver to use: >> driver = weewx.drivers.vantage >> >> On 26 Jan, 2025, at 19:33, scott pierce <johnsco...@gmail.com> wrote: >> >> How does the Meteobridge Nano SD connect to WeeWx on the Raspberry Pi? >> On Sunday, January 26, 2025 at 5:55:31 PM UTC-5 weather list wrote: >> >>> I've been using a Meteobridge Nano SD >>> <https://www.meteobridge.com/wiki/index.php/Meteobridge_NANO> for a few >>> years with a couple of 6312's and WeeWX on an NUC 5; it has also proved >>> very solid, and not bothered by power flickers. Downside? They're pricey. >>> Upside: lots of reports available natively, and you can set up feeds >>> directly to nearly any weather site you can name w/o passing through WeeWx. >>> Can be managed remotely via the Internet, and it has a couple of weather >>> sites built right into the unit. >>> >>> On 26 Jan, 2025, at 17:07, scott pierce <johnsco...@gmail.com> wrote: >>> >>> Hi, >>> Brand new and about to get started from scratch. I have both a WWL 6100 >>> that is currently uploading data to Davis WeatherLink website and also a >>> couple of old 6312s that set up around the house receiving data directly >>> from the ISS. I have a USB data logger in one that is currently not >>> connected anywhere. >>> As I get ready to embark on setting up WeeWx on RaspBerry Pi, is there a >>> preferred interface between the two options I have listed. What works >>> better with WeeWx and Rpi5? >>> Thanks >>> Scott >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "weewx-user" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to weewx-user+...@googlegroups.com. >>> To view this discussion visit >>> https://groups.google.com/d/msgid/weewx-user/9683fb5d-171d-46d3-bef7-92cd55507027n%40googlegroups.com >>> >>> <https://groups.google.com/d/msgid/weewx-user/9683fb5d-171d-46d3-bef7-92cd55507027n%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> >>> >>> >> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to weewx-user+...@googlegroups.com. >> >> To view this discussion visit >> https://groups.google.com/d/msgid/weewx-user/de757cae-2f6a-43bb-a29d-2f1b2a7d7b55n%40googlegroups.com >> >> <https://groups.google.com/d/msgid/weewx-user/de757cae-2f6a-43bb-a29d-2f1b2a7d7b55n%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> >> >> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion visit https://groups.google.com/d/msgid/weewx-user/fd14f22b-5aed-469b-a24b-9e7cd5933df9n%40googlegroups.com.
