Awesome!  Thanks!

On Sunday, January 26, 2025 at 8:29:22 PM UTC-5 weather list wrote:
> It plugs into the 6312 expansion port, and its connection is wi-fi to the 
> local LAN. WeeWx connects using the IP assigned to the Meteobridge. I 
> always configure my LAN router to assign a fixed IP to the Meteobridge 
> based on the MAC address of the Meteobridge.
> -------------------------------------------------------
> [Vantage]
>     # This section is for the Davis Vantage series of weather stations.
>     
>     # Connection type: serial or ethernet 
>     #  serial (the classic VantagePro)
>     #  ethernet (the WeatherLinkIP or Serial-Ethernet bridge)
>     type = ethernet
>     
>     # If the connection type is serial, a port must be specified:
>     #   Debian, Ubuntu, Redhat, Fedora, and SuSE:
>     #     /dev/ttyUSB0 is a common USB port name
>     #     /dev/ttyS0   is a common serial port name
>     #   BSD:
>     #     /dev/cuaU0   is a common serial port name
>     # port = /dev/ttyUSB0
>     
>     # If the connection type is ethernet, an IP Address/hostname is 
> required:
>     host = 192.168.1.14
>
>     
>     ######################################################
>     # The rest of this section rarely needs any attention. 
>     # You can safely leave it "as is."
>     ######################################################
>     
>     # Serial baud rate (usually 19200)
>     baudrate = 19200
>     
>     # TCP port (when using the WeatherLinkIP)
>     # tcp_port = 22222
>     
>     # TCP send delay (when using the WeatherLinkIP):
>     tcp_send_delay = 0.5
>     
>     # The type of LOOP packet to request: 1 = LOOP1; 2 = LOOP2; 3 = both
>     loop_request = 1
>     
>     # The id of your ISS station (usually 1). If you use a wind meter 
> connected
>     # to a anemometer transmitter kit, use its id
>     iss_id = 1
>     
>     # How long to wait for a response from the station before giving up (in
>     # seconds; must be greater than 2)
>     timeout = 10
>     
>     # How long to wait before trying again (in seconds)
>     wait_before_retry = 1.2
>     
>     # How many times to try before giving up:
>     max_tries = 8
>     
>     # Vantage model Type: 1 = Vantage Pro; 2 = Vantage Pro2
>     model_type = 2
>     
>     # The driver to use:
>     driver = weewx.drivers.vantage
>
> On 26 Jan, 2025, at 19:33, scott pierce <johnsco...@gmail.com> wrote:
>
> How does the Meteobridge Nano SD connect to WeeWx on the Raspberry Pi?
> On Sunday, January 26, 2025 at 5:55:31 PM UTC-5 weather list wrote:
>
>> I've been using a Meteobridge Nano SD 
>> <https://www.meteobridge.com/wiki/index.php/Meteobridge_NANO> for a few 
>> years with a couple of 6312's and WeeWX on an NUC 5; it has also proved 
>> very solid, and not bothered by power flickers. Downside? They're pricey. 
>> Upside: lots of reports available natively, and you can set up feeds 
>> directly to nearly any weather site you can name w/o passing through WeeWx. 
>> Can be managed remotely via the Internet, and it has a couple of weather 
>> sites built right into the unit.
>>
>> On 26 Jan, 2025, at 17:07, scott pierce <johnsco...@gmail.com> wrote:
>>
>> Hi,
>> Brand new and about to get started from scratch.  I have both a WWL 6100 
>> that is currently uploading data to Davis WeatherLink website and also a 
>> couple of old 6312s that set up around the house receiving data directly 
>> from the ISS. I have a USB data logger in one that is currently not 
>> connected anywhere.
>> As I get ready to embark on setting up WeeWx on RaspBerry Pi, is there a 
>> preferred interface between the two options I have listed.  What works 
>> better with WeeWx and Rpi5?
>> Thanks
>> Scott
>>
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "weewx-user" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to weewx-user+...@googlegroups.com.
>> To view this discussion visit 
>> https://groups.google.com/d/msgid/weewx-user/9683fb5d-171d-46d3-bef7-92cd55507027n%40googlegroups.com
>>  
>> <https://groups.google.com/d/msgid/weewx-user/9683fb5d-171d-46d3-bef7-92cd55507027n%40googlegroups.com?utm_medium=email&utm_source=footer>
>> .
>>
>>
>>
> -- 
> You received this message because you are subscribed to the Google Groups 
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to weewx-user+...@googlegroups.com.
>
> To view this discussion visit 
> https://groups.google.com/d/msgid/weewx-user/de757cae-2f6a-43bb-a29d-2f1b2a7d7b55n%40googlegroups.com
>  
> <https://groups.google.com/d/msgid/weewx-user/de757cae-2f6a-43bb-a29d-2f1b2a7d7b55n%40googlegroups.com?utm_medium=email&utm_source=footer>
> .
>
>
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion visit 
https://groups.google.com/d/msgid/weewx-user/a77d1487-ba47-4f98-af24-6f04dea7bb31n%40googlegroups.com.

Reply via email to