It plugs into the 6312 expansion port, and its connection is wi-fi to the local
LAN. WeeWx connects using the IP assigned to the Meteobridge. I always
configure my LAN router to assign a fixed IP to the Meteobridge based on the
MAC address of the Meteobridge.
-------------------------------------------------------
[Vantage]
# This section is for the Davis Vantage series of weather stations.
# Connection type: serial or ethernet
# serial (the classic VantagePro)
# ethernet (the WeatherLinkIP or Serial-Ethernet bridge)
type = ethernet
# If the connection type is serial, a port must be specified:
# Debian, Ubuntu, Redhat, Fedora, and SuSE:
# /dev/ttyUSB0 is a common USB port name
# /dev/ttyS0 is a common serial port name
# BSD:
# /dev/cuaU0 is a common serial port name
# port = /dev/ttyUSB0
# If the connection type is ethernet, an IP Address/hostname is required:
host = 192.168.1.14
######################################################
# The rest of this section rarely needs any attention.
# You can safely leave it "as is."
######################################################
# Serial baud rate (usually 19200)
baudrate = 19200
# TCP port (when using the WeatherLinkIP)
# tcp_port = 22222
# TCP send delay (when using the WeatherLinkIP):
tcp_send_delay = 0.5
# The type of LOOP packet to request: 1 = LOOP1; 2 = LOOP2; 3 = both
loop_request = 1
# The id of your ISS station (usually 1). If you use a wind meter connected
# to a anemometer transmitter kit, use its id
iss_id = 1
# How long to wait for a response from the station before giving up (in
# seconds; must be greater than 2)
timeout = 10
# How long to wait before trying again (in seconds)
wait_before_retry = 1.2
# How many times to try before giving up:
max_tries = 8
# Vantage model Type: 1 = Vantage Pro; 2 = Vantage Pro2
model_type = 2
# The driver to use:
driver = weewx.drivers.vantage
> On 26 Jan, 2025, at 19:33, scott pierce <johnscottpie...@gmail.com> wrote:
>
> How does the Meteobridge Nano SD connect to WeeWx on the Raspberry Pi?
> On Sunday, January 26, 2025 at 5:55:31 PM UTC-5 weather list wrote:
> I've been using a Meteobridge Nano SD
> <https://www.meteobridge.com/wiki/index.php/Meteobridge_NANO> for a few years
> with a couple of 6312's and WeeWX on an NUC 5; it has also proved very solid,
> and not bothered by power flickers. Downside? They're pricey. Upside: lots of
> reports available natively, and you can set up feeds directly to nearly any
> weather site you can name w/o passing through WeeWx. Can be managed remotely
> via the Internet, and it has a couple of weather sites built right into the
> unit.
>
>
>> On 26 Jan, 2025, at 17:07, scott pierce <johnsco...@gmail.com
>> <applewebdata://4E70F0D7-F8E1-4724-B95A-B407433A4293>> wrote:
>>
>
>> Hi,
>> Brand new and about to get started from scratch. I have both a WWL 6100
>> that is currently uploading data to Davis WeatherLink website and also a
>> couple of old 6312s that set up around the house receiving data directly
>> from the ISS. I have a USB data logger in one that is currently not
>> connected anywhere.
>> As I get ready to embark on setting up WeeWx on RaspBerry Pi, is there a
>> preferred interface between the two options I have listed. What works
>> better with WeeWx and Rpi5?
>> Thanks
>> Scott
>>
>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "weewx-user" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to weewx-user+...@googlegroups.com
>> <applewebdata://4E70F0D7-F8E1-4724-B95A-B407433A4293>.
>> To view this discussion visit
>> https://groups.google.com/d/msgid/weewx-user/9683fb5d-171d-46d3-bef7-92cd55507027n%40googlegroups.com
>>
>> <https://groups.google.com/d/msgid/weewx-user/9683fb5d-171d-46d3-bef7-92cd55507027n%40googlegroups.com?utm_medium=email&utm_source=footer>.
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com
> <mailto:weewx-user+unsubscr...@googlegroups.com>.
> To view this discussion visit
> https://groups.google.com/d/msgid/weewx-user/de757cae-2f6a-43bb-a29d-2f1b2a7d7b55n%40googlegroups.com
>
> <https://groups.google.com/d/msgid/weewx-user/de757cae-2f6a-43bb-a29d-2f1b2a7d7b55n%40googlegroups.com?utm_medium=email&utm_source=footer>.
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion visit
https://groups.google.com/d/msgid/weewx-user/6EA39F3F-9EF9-4DC7-AE92-1884D400C837%40gmail.com.
