Hello Jonathan, As Robert said I had several issues to solve.
But mainly the solution was to put in place an access point on the Raspberry Pi OS, Connect the station on this access point Install weewx with interceptor following this help : https://github.com/weewx/weewx/wiki/gw1000-recipe Configure interceptor part in weewx.conf following this answer to my question : https://groups.google.com/g/weewx-user/c/AMecZZXf_BM/m/Hatd_041AQAJ Le dimanche 5 janvier 2025 à 23:26:08 UTC+1, Robert Turner a écrit : > What specific issue are you having? I think there were several parts in > this thread of getting this station working. > > On Saturday, January 4, 2025 at 8:01:47 PM UTC-5 Jonathan Emmert wrote: > >> What was the solution? I have a similar issue and am wondering what you >> did to fix it. >> >> On Wednesday, December 25, 2024 at 3:42:32 AM UTC-5 Jean-Marie Schneider >> wrote: >> >>> Thanks you for your help ! >>> >>> My station with weewx is operational ! >>> >>> Merry Christmas ! >>> Jean-Marie >>> >>> Le lundi 23 décembre 2024 à 22:19:26 UTC+1, vince a écrit : >>> >>>> Look at the preferred answer in the link Robert provided. That’s the >>>> answer. >>>> >>>> Just for more info run ‘sudo groups weewx’ so we can see which groups >>>> the weewx user is in, and also run the groups command for whatever user >>>> you >>>> used to run weewxd. >>>> >>>> This problem happens frequently for certain configurations in v5 which >>>> no longer runs as root. Always check your logs. They almost always show >>>> why >>>> something is not working. >>>> >>>> On Monday, December 23, 2024 at 12:46:04 PM UTC-8 Robert Turner wrote: >>>> >>>>> >>>>> Tcpdump needs permission if not running as root. This link gives info >>>>> on how to give the permission. >>>>> https://askubuntu.com/questions/530920/tcpdump-permissions-problem >>>>> On Monday, December 23, 2024 at 3:26:37 PM UTC-5 Jean-Marie Schneider >>>>> wrote: >>>>> >>>>>> Thanks you Vince. >>>>>> >>>>>> I have an error : déc. 23 17:49:02 stationmeteo weewxd[48084]: ERROR >>>>>> user.interceptor: tcpdump process died: tcpdump: wlan0: You don't have >>>>>> permission to perform this capture on that device >>>>>> (socket: Operation not >>>>>> permitted) >>>>>> >>>>>> So error is located. But how can I solve that ? >>>>>> Where I have to put that permission ? >>>>>> >>>>>> Sorry for this question, I am using Linux rarely ! >>>>>> Le lundi 23 décembre 2024 à 18:57:42 UTC+1, vince a écrit : >>>>>> >>>>>>> What account are you running "python3 /usr/share/weewx/weewxd.py >>>>>>> /etc/weewx/weewx.conf" under ? >>>>>>> >>>>>>> For logs, please read >>>>>>> https://github.com/weewx/weewx/wiki/view-logs#journalctl and see if >>>>>>> "sudo journalctl -u weewx" shows your logs. It always helps to set >>>>>>> debug=1 in your weewx.conf file so please do so if you have not >>>>>>> done so already. >>>>>>> >>>>>>> On Monday, December 23, 2024 at 9:00:43 AM UTC-8 Jean-Marie >>>>>>> Schneider wrote: >>>>>>> >>>>>>>> Hello, >>>>>>>> >>>>>>>> My remark was about weewx, which when running was not pulling, or >>>>>>>> saving the data's. Even if status message seams OK : >>>>>>>> >>>>>>>> 1. sudo systemctl status weewx >>>>>>>> 2. â— weewx.service - WeeWX >>>>>>>> 3. Loaded: loaded (/lib/systemd/system/weewx.service; >>>>>>>> enabled; preset: enabled) >>>>>>>> 4. Active: active (running) since Mon 2024-12-23 17:49:01 >>>>>>>> CET; 27s ago >>>>>>>> 5. Docs: https://weewx.com/docs >>>>>>>> 6. Main PID: 48084 (python3) >>>>>>>> 7. Tasks: 1 (limit: 9252) >>>>>>>> 8. CPU: 156ms >>>>>>>> 9. CGroup: /system.slice/weewx.service >>>>>>>> 10. └─48084 python3 /usr/share/weewx/weewxd.py >>>>>>>> /etc/weewx/weewx.conf >>>>>>>> 11. >>>>>>>> 12. déc. 23 17:49:02 stationmeteo weewxd[48084]: INFO >>>>>>>> weewx.restx: PWSweather: Posting not enabled. >>>>>>>> 13. déc. 23 17:49:02 stationmeteo weewxd[48084]: INFO >>>>>>>> weewx.restx: CWOP: Posting not enabled. >>>>>>>> 14. déc. 23 17:49:02 stationmeteo weewxd[48084]: INFO >>>>>>>> weewx.restx: WOW: Posting not enabled. >>>>>>>> 15. déc. 23 17:49:02 stationmeteo weewxd[48084]: INFO >>>>>>>> weewx.restx: AWEKAS: Posting not enabled. >>>>>>>> 16. déc. 23 17:49:02 stationmeteo weewxd[48084]: INFO >>>>>>>> weewx.engine: 'pyephem' detected, extended almanac data is available >>>>>>>> 17. déc. 23 17:49:02 stationmeteo weewxd[48084]: INFO >>>>>>>> __main__: Starting up weewx version 5.1.0 >>>>>>>> 18. déc. 23 17:49:02 stationmeteo weewxd[48084]: INFO >>>>>>>> weewx.engine: Using binding 'wx_binding' to database 'weewx' >>>>>>>> 19. déc. 23 17:49:02 stationmeteo weewxd[48084]: INFO >>>>>>>> weewx.manager: Starting backfill of daily summaries >>>>>>>> 20. déc. 23 17:49:02 stationmeteo weewxd[48084]: INFO >>>>>>>> weewx.manager: Daily summaries up to date >>>>>>>> 21. déc. 23 17:49:02 stationmeteo weewxd[48084]: INFO >>>>>>>> weewx.engine: Starting main packet loop. >>>>>>>> 22. >>>>>>>> >>>>>>>> I erase the system and install Raspberry Pi OS. From this new >>>>>>>> point, I install weewx and interceptor following this page : >>>>>>>> https://github.com/weewx/weewx/wiki/gw1000-recipe. >>>>>>>> I created access point, and then modify weewx.con accordingly. >>>>>>>> Again same behavior, with weewxd, data's are recorded. But with the >>>>>>>> deamon there are not recorded ! >>>>>>>> >>>>>>>> Did have some one already see this behavior ? >>>>>>>> >>>>>>>> Thanks you for your help >>>>>>>> Jean-Marie >>>>>>>> >>>>>>>> Le vendredi 20 décembre 2024 à 01:06:49 UTC+1, Robert Turner a >>>>>>>> écrit : >>>>>>>> >>>>>>>>> I think it is normal that weewxd is running. When I installed it >>>>>>>>> the weewxd was automatically setup to run. I believe it would depend >>>>>>>>> on how >>>>>>>>> you installed it. Installing with apt it automatically sets up the >>>>>>>>> daemon >>>>>>>>> to run in the background. >>>>>>>>> >>>>>>>>> On Thursday, December 19, 2024 at 3:18:50 PM UTC-5 Jean-Marie >>>>>>>>> Schneider wrote: >>>>>>>>> >>>>>>>>>> Sorry to be unclear, between my English and my explantation, even >>>>>>>>>> simple situation to explain could come complicated ! >>>>>>>>>> >>>>>>>>>> Here is screen capture of the recorded data's from Monday : >>>>>>>>>> [image: Capture d’écran 2024-12-19 210915.jpg] >>>>>>>>>> The beginning of the trace correspond to weewxd running. Then I >>>>>>>>>> run weewx as daemon, no data recorded in the database, and no >>>>>>>>>> trace. I did >>>>>>>>>> this two times (weewxd, weewx, weewxd, weewx) with the same results. >>>>>>>>>> Now >>>>>>>>>> only weewxd is running without interruption from that third run. >>>>>>>>>> >>>>>>>>>> I try to find error in the log's, but I see nothing. But perhaps >>>>>>>>>> I have not open the good file ! >>>>>>>>>> >>>>>>>>>> So the driver is capturing data and stored in the database with >>>>>>>>>> weewxd, but not with weewx... >>>>>>>>>> >>>>>>>>>> Le jeudi 19 décembre 2024 à 03:02:33 UTC+1, Robert Turner a >>>>>>>>>> écrit : >>>>>>>>>> >>>>>>>>>>> Are you saying that the data is not stored in the database? I >>>>>>>>>>> was thinking that your post was a little unclear. I'm not too sure >>>>>>>>>>> I can >>>>>>>>>>> solve that problem which is strange if the driver is running >>>>>>>>>>> capturing the >>>>>>>>>>> data. >>>>>>>>>>> >>>>>>>>>>> On Monday, December 16, 2024 at 2:02:43 PM UTC-5 Jean-Marie >>>>>>>>>>> Schneider wrote: >>>>>>>>>>> >>>>>>>>>>>> Hello, >>>>>>>>>>>> >>>>>>>>>>>> I did not found where is coming this issue. And surprisingly >>>>>>>>>>>> when I run weewxd, data's are correctly save into the database ! >>>>>>>>>>>> Any help will be appreciated ;) ! >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> Le dimanche 15 décembre 2024 à 11:49:59 UTC+1, Jean-Marie >>>>>>>>>>>> Schneider a écrit : >>>>>>>>>>>> >>>>>>>>>>>>> Hello, >>>>>>>>>>>>> >>>>>>>>>>>>> Robert I use your Interceptor.py file, and your conf set as >>>>>>>>>>>>> you. >>>>>>>>>>>>> it is OK for receiving the data's : >>>>>>>>>>>>> ~ $ sudo weewxd >>>>>>>>>>>>> Using configuration file /etc/weewx/weewx.conf >>>>>>>>>>>>> LOOP: 2024-12-15 11:44:09 CET (1734259449) 'altimeter': >>>>>>>>>>>>> 'None', 'appTemp': '45.17646502340741', 'barometer': '30.11', >>>>>>>>>>>>> 'cloudbase': >>>>>>>>>>>>> '454.4292200824276', 'dateTime': '1734259449', 'dewpoint': >>>>>>>>>>>>> '47.2', 'ET': >>>>>>>>>>>>> 'None', 'heatindex': '46.603', 'humidex': '48.589000630562424', >>>>>>>>>>>>> 'inDewpoint': 'None', 'maxSolarRad': '248.1637619033187', >>>>>>>>>>>>> 'outHumidity': >>>>>>>>>>>>> '99.0', 'outTemp': '47.5', 'pressure': 'None', 'rain': 'None', >>>>>>>>>>>>> 'rainRate': >>>>>>>>>>>>> '0.0', 'usUnits': '1', 'UV': '0.0', 'windchill': '47.5', >>>>>>>>>>>>> 'windDir': '20.0', >>>>>>>>>>>>> 'windGust': '4.4', 'windrun': 'None', 'windSpeed': '3.0' >>>>>>>>>>>>> LOOP: 2024-12-15 11:45:14 CET (1734259514) 'altimeter': >>>>>>>>>>>>> 'None', 'appTemp': '45.90871472340741', 'barometer': '30.11', >>>>>>>>>>>>> 'cloudbase': >>>>>>>>>>>>> '454.4292200824276', 'dateTime': '1734259514', 'dewpoint': >>>>>>>>>>>>> '47.2', 'ET': >>>>>>>>>>>>> 'None', 'heatindex': '46.603', 'humidex': '48.589000630562424', >>>>>>>>>>>>> 'inDewpoint': 'None', 'maxSolarRad': '249.19217896926534', >>>>>>>>>>>>> 'outHumidity': >>>>>>>>>>>>> '99.0', 'outTemp': '47.5', 'pressure': 'None', 'rain': '0.0', >>>>>>>>>>>>> 'rainRate': >>>>>>>>>>>>> '0.0', 'usUnits': '1', 'UV': '0.0', 'windchill': '47.5', >>>>>>>>>>>>> 'windDir': '7.0', >>>>>>>>>>>>> 'windGust': '3.4', 'windrun': 'None', 'windSpeed': '1.7' >>>>>>>>>>>>> >>>>>>>>>>>>> Thanks you Robert for this updated file. >>>>>>>>>>>>> >>>>>>>>>>>>> Now run the daemon, the database is created but not data's are >>>>>>>>>>>>> saved. I will search for this issu ! >>>>>>>>>>>>> >>>>>>>>>>>>> Had a good end of week end ! >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> Le samedi 14 décembre 2024 à 23:36:16 UTC+1, Jean-Marie >>>>>>>>>>>>> Schneider a écrit : >>>>>>>>>>>>> >>>>>>>>>>>>>> Robert, I will try tomorrow, after a good nigh hopefully ! >>>>>>>>>>>>>> And I have a doubt about my installation of weewx. Let see >>>>>>>>>>>>>> tomorrow... >>>>>>>>>>>>>> >>>>>>>>>>>>>> Le samedi 14 décembre 2024 à 22:16:40 UTC+1, Robert Turner a >>>>>>>>>>>>>> écrit : >>>>>>>>>>>>>> >>>>>>>>>>>>>>> This is how my conf is set. >>>>>>>>>>>>>>> [Interceptor] >>>>>>>>>>>>>>> driver = user.interceptor >>>>>>>>>>>>>>> device_type = wu-client >>>>>>>>>>>>>>> mode = sniff >>>>>>>>>>>>>>> iface = wlan0 >>>>>>>>>>>>>>> pcap_filter = src 192.168.5.131 and dst port 80 >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Are you using the original interceptor.py or the one I >>>>>>>>>>>>>>> modified? >>>>>>>>>>>>>>> On Saturday, December 14, 2024 at 4:04:58 PM UTC-5 >>>>>>>>>>>>>>> Jean-Marie Schneider wrote: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Thanks you Robert. I try it. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> I have set an AP, and this time I see the flow of data >>>>>>>>>>>>>>>> between my station and wunderground.com : >>>>>>>>>>>>>>>> 37 130.019998 10.42.0.13 34.232.250.77 HTTP 402 GET >>>>>>>>>>>>>>>> /weatherstation/updateweatherstation.php?ID=ISAINT8047&PASSWORD=abc456&dateutc=2024-12-11+18%3A50%3A3&baromin=29.92&tempf=40.7&humidity=86&dewptf=36.7&rainin=0&dailyrainin=0&winddir=267&windspeedmph=3.2&windgustmph=4.9&UV=0&solarRadiation=0 >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> HTTP/1.1 >>>>>>>>>>>>>>>> Frame 5: 403 bytes on wire (3224 bits), 403 bytes captured >>>>>>>>>>>>>>>> (3224 bits) >>>>>>>>>>>>>>>> Ethernet II, Src: BouffaloLab_ab:75:d3 (b8:3d:fb:ab:75:d3), >>>>>>>>>>>>>>>> Dst: RaspberryPi_5d:f0:b2 (2c:cf:67:5d:f0:b2) >>>>>>>>>>>>>>>> Destination: RaspberryPi_5d:f0:b2 (2c:cf:67:5d:f0:b2) >>>>>>>>>>>>>>>> Source: BouffaloLab_ab:75:d3 (b8:3d:fb:ab:75:d3) >>>>>>>>>>>>>>>> Type: IPv4 (0x0800) >>>>>>>>>>>>>>>> [Stream index: 0] >>>>>>>>>>>>>>>> Internet Protocol Version 4, Src: 10.42.0.13, Dst: >>>>>>>>>>>>>>>> 34.232.250.77 >>>>>>>>>>>>>>>> Transmission Control Protocol, Src Port: 53970, Dst Port: >>>>>>>>>>>>>>>> 80, Seq: 1, Ack: 1, Len: 349 >>>>>>>>>>>>>>>> Source Port: 53970 >>>>>>>>>>>>>>>> Destination Port: 80 >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> I perform a first modification with port setting : >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> [Interceptor] >>>>>>>>>>>>>>>> driver = user.interceptor >>>>>>>>>>>>>>>> iface = wlan0 >>>>>>>>>>>>>>>> port = 53970 >>>>>>>>>>>>>>>> pcap_filter = src 10.42.0.13 >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Weewxd run, as well weewx, but no data are obtained. I >>>>>>>>>>>>>>>> discover that the port is dynamically set (next connexion, it >>>>>>>>>>>>>>>> is 53971, and >>>>>>>>>>>>>>>> so one. >>>>>>>>>>>>>>>> But, if a don't set the port, weewx did not start with the >>>>>>>>>>>>>>>> following error : >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> ERROR weewx.engine: Import of driver failed: [Errno 13] >>>>>>>>>>>>>>>> Permission non accordée (<class 'PermissionError'>) >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> I read the page of permissions >>>>>>>>>>>>>>>> <https://github.com/weewx/weewx/wiki/Understanding-permissions#how-to-fix-network-permissions> >>>>>>>>>>>>>>>> and >>>>>>>>>>>>>>>> allowing no method seams easy, especially as the port used by >>>>>>>>>>>>>>>> my pws is >>>>>>>>>>>>>>>> upper than 1024, the simpler will be to listen all the port >>>>>>>>>>>>>>>> upper than >>>>>>>>>>>>>>>> 1024, or some thing like this. But I have till now not found >>>>>>>>>>>>>>>> how to set >>>>>>>>>>>>>>>> that filter. Any help will be welcome ! >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Jean-Marie >>>>>>>>>>>>>>>> Le jeudi 12 décembre 2024 à 00:16:27 UTC+1, Robert Turner a >>>>>>>>>>>>>>>> écrit : >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> This version of the interceptor will be able to sniff the >>>>>>>>>>>>>>>>> WLAN0 in AP mode. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> On Tuesday, December 10, 2024 at 4:22:47 PM UTC-5 >>>>>>>>>>>>>>>>> Jean-Marie Schneider wrote: >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Thanks you for yours answer. >>>>>>>>>>>>>>>>>> @vince : I am such of the IP. As already said, turning of >>>>>>>>>>>>>>>>>> the WS let the ping without answer. And the four Devolo are >>>>>>>>>>>>>>>>>> recognize by >>>>>>>>>>>>>>>>>> Advance IP Scanner. They have a different IP than the WS. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> @Robert : I will learn how to set up an access point, and >>>>>>>>>>>>>>>>>> come back with the results. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Le mardi 10 décembre 2024 à 03:10:37 UTC+1, Robert Turner >>>>>>>>>>>>>>>>>> a écrit : >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> I'm not completely sure of your network layout. I >>>>>>>>>>>>>>>>>>> believe you can't sniff wifi traffic with just connecting >>>>>>>>>>>>>>>>>>> to the same wifi >>>>>>>>>>>>>>>>>>> network. Traffic from a device on wifi going to the >>>>>>>>>>>>>>>>>>> internet is not >>>>>>>>>>>>>>>>>>> rebroadcast to all devices on the wifi. If your device is >>>>>>>>>>>>>>>>>>> connected to wifi >>>>>>>>>>>>>>>>>>> and it's sending data to the internet it would go through >>>>>>>>>>>>>>>>>>> the wifi router >>>>>>>>>>>>>>>>>>> to the WAN port of the router. It wouldn't show up on the >>>>>>>>>>>>>>>>>>> Wifi network or >>>>>>>>>>>>>>>>>>> LAN. You possibly could tap it by mirroring the data on the >>>>>>>>>>>>>>>>>>> WAN port. >>>>>>>>>>>>>>>>>>> I did do this a little differently with my wifi weather >>>>>>>>>>>>>>>>>>> station. I configured the pi to be an access point with its >>>>>>>>>>>>>>>>>>> wireless >>>>>>>>>>>>>>>>>>> adapter and the ethernet port connected to my router. I >>>>>>>>>>>>>>>>>>> setup the access >>>>>>>>>>>>>>>>>>> point on the pi to route to the ethernet port and connected >>>>>>>>>>>>>>>>>>> the weather >>>>>>>>>>>>>>>>>>> station to the pi access point. I modified the interceptor >>>>>>>>>>>>>>>>>>> to use tcpdump >>>>>>>>>>>>>>>>>>> to capture data on the pi wlan0. The modification was >>>>>>>>>>>>>>>>>>> necessary because the >>>>>>>>>>>>>>>>>>> interceptor was not able to sniff the wlan0 on the pi when >>>>>>>>>>>>>>>>>>> it was in access >>>>>>>>>>>>>>>>>>> point mode. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> On Monday, December 9, 2024 at 3:12:28 PM UTC-5 vince >>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Your wireshark sniffer settings have to be incorrect. >>>>>>>>>>>>>>>>>>>> My wild guess in the absence of a network diagram showing >>>>>>>>>>>>>>>>>>>> which address is >>>>>>>>>>>>>>>>>>>> where would be that your Devolo LAN PLC is the source >>>>>>>>>>>>>>>>>>>> address to WU, not >>>>>>>>>>>>>>>>>>>> the address of the weather station. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> On Monday, December 9, 2024 at 11:51:34 AM UTC-8 >>>>>>>>>>>>>>>>>>>> Jean-Marie Schneider wrote: >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Hello, >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> I have set up a VEVOR 7-in-1 Wi-Fi Weather Station and >>>>>>>>>>>>>>>>>>>>> would like to connect it to WeeWX. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> I believe that the WeeWX-interceptor could be a >>>>>>>>>>>>>>>>>>>>> solution, or at least worth trying! I installed WeeWX and >>>>>>>>>>>>>>>>>>>>> the interceptor >>>>>>>>>>>>>>>>>>>>> without any issues. Before attempting to connect my >>>>>>>>>>>>>>>>>>>>> station, I want to >>>>>>>>>>>>>>>>>>>>> verify the data being sent to wunderground.com, where >>>>>>>>>>>>>>>>>>>>> my station transmits its data, or at least check if I can >>>>>>>>>>>>>>>>>>>>> see them. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> My configuration is as follows: >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> - The weather station is connected via Wi-Fi to a >>>>>>>>>>>>>>>>>>>>> Devolo Wi-Fi network (using Powerline Communication, >>>>>>>>>>>>>>>>>>>>> PLC). >>>>>>>>>>>>>>>>>>>>> - The reception is done by the Devolo LAN (through >>>>>>>>>>>>>>>>>>>>> PLC). >>>>>>>>>>>>>>>>>>>>> - The Devolo LAN is connected to my router. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> From my computer, which is also connected through the >>>>>>>>>>>>>>>>>>>>> Devolo Wi-Fi, I determined the station's IP address using >>>>>>>>>>>>>>>>>>>>> ZeNMAP (confirmed >>>>>>>>>>>>>>>>>>>>> by powering off the station: when I ping the IP, I get no >>>>>>>>>>>>>>>>>>>>> response from the >>>>>>>>>>>>>>>>>>>>> station). Using Wireshark, I monitor the flow on the >>>>>>>>>>>>>>>>>>>>> Wi-Fi (wlan0), and >>>>>>>>>>>>>>>>>>>>> there is a lot of traffic. I applied a filter for the >>>>>>>>>>>>>>>>>>>>> station's IP address, >>>>>>>>>>>>>>>>>>>>> but then I observe nothing—no traffic!? >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> I also scanned the LAN, but still no additional data. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Next, I placed an Ethernet Network Tap between the >>>>>>>>>>>>>>>>>>>>> router and the Devolo LAN. I connected a Raspberry Pi to >>>>>>>>>>>>>>>>>>>>> this tap and >>>>>>>>>>>>>>>>>>>>> monitored the LAN activity using tcpdump, but again, >>>>>>>>>>>>>>>>>>>>> there was nothing >>>>>>>>>>>>>>>>>>>>> related to my station. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> I'm struggling to understand why! The station's data >>>>>>>>>>>>>>>>>>>>> is visible on the Wunderground site, updated every >>>>>>>>>>>>>>>>>>>>> minute. It's not a >>>>>>>>>>>>>>>>>>>>> pigeon delivering the data... So, my question is: what am >>>>>>>>>>>>>>>>>>>>> I doing wrong? >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion visit https://groups.google.com/d/msgid/weewx-user/6abb91c7-3130-4445-bb87-ccbe3369590en%40googlegroups.com.
