What account are you running "python3 /usr/share/weewx/weewxd.py /etc/weewx/weewx.conf" under ?
For logs, please read https://github.com/weewx/weewx/wiki/view-logs#journalctl and see if "sudo journalctl -u weewx" shows your logs. It always helps to set debug=1 in your weewx.conf file so please do so if you have not done so already. On Monday, December 23, 2024 at 9:00:43 AM UTC-8 Jean-Marie Schneider wrote: > Hello, > > My remark was about weewx, which when running was not pulling, or saving > the data's. Even if status message seams OK : > > 1. sudo systemctl status weewx > 2. â— weewx.service - WeeWX > 3. Loaded: loaded (/lib/systemd/system/weewx.service; enabled; > preset: enabled) > 4. Active: active (running) since Mon 2024-12-23 17:49:01 CET; > 27s ago > 5. Docs: https://weewx.com/docs > 6. Main PID: 48084 (python3) > 7. Tasks: 1 (limit: 9252) > 8. CPU: 156ms > 9. CGroup: /system.slice/weewx.service > 10. └─48084 python3 /usr/share/weewx/weewxd.py > /etc/weewx/weewx.conf > 11. > 12. déc. 23 17:49:02 stationmeteo weewxd[48084]: INFO weewx.restx: > PWSweather: Posting not enabled. > 13. déc. 23 17:49:02 stationmeteo weewxd[48084]: INFO weewx.restx: > CWOP: Posting not enabled. > 14. déc. 23 17:49:02 stationmeteo weewxd[48084]: INFO weewx.restx: > WOW: Posting not enabled. > 15. déc. 23 17:49:02 stationmeteo weewxd[48084]: INFO weewx.restx: > AWEKAS: Posting not enabled. > 16. déc. 23 17:49:02 stationmeteo weewxd[48084]: INFO weewx.engine: > 'pyephem' detected, extended almanac data is available > 17. déc. 23 17:49:02 stationmeteo weewxd[48084]: INFO __main__: > Starting up weewx version 5.1.0 > 18. déc. 23 17:49:02 stationmeteo weewxd[48084]: INFO weewx.engine: > Using binding 'wx_binding' to database 'weewx' > 19. déc. 23 17:49:02 stationmeteo weewxd[48084]: INFO weewx.manager: > Starting backfill of daily summaries > 20. déc. 23 17:49:02 stationmeteo weewxd[48084]: INFO weewx.manager: > Daily summaries up to date > 21. déc. 23 17:49:02 stationmeteo weewxd[48084]: INFO weewx.engine: > Starting main packet loop. > 22. > > I erase the system and install Raspberry Pi OS. From this new point, I > install weewx and interceptor following this page : > https://github.com/weewx/weewx/wiki/gw1000-recipe. > I created access point, and then modify weewx.con accordingly. > Again same behavior, with weewxd, data's are recorded. But with the deamon > there are not recorded ! > > Did have some one already see this behavior ? > > Thanks you for your help > Jean-Marie > > Le vendredi 20 décembre 2024 à 01:06:49 UTC+1, Robert Turner a écrit : > >> I think it is normal that weewxd is running. When I installed it the >> weewxd was automatically setup to run. I believe it would depend on how you >> installed it. Installing with apt it automatically sets up the daemon to >> run in the background. >> >> On Thursday, December 19, 2024 at 3:18:50 PM UTC-5 Jean-Marie Schneider >> wrote: >> >>> Sorry to be unclear, between my English and my explantation, even simple >>> situation to explain could come complicated ! >>> >>> Here is screen capture of the recorded data's from Monday : >>> [image: Capture d’écran 2024-12-19 210915.jpg] >>> The beginning of the trace correspond to weewxd running. Then I run >>> weewx as daemon, no data recorded in the database, and no trace. I did >>> this two times (weewxd, weewx, weewxd, weewx) with the same results. Now >>> only weewxd is running without interruption from that third run. >>> >>> I try to find error in the log's, but I see nothing. But perhaps I have >>> not open the good file ! >>> >>> So the driver is capturing data and stored in the database with weewxd, >>> but not with weewx... >>> >>> Le jeudi 19 décembre 2024 à 03:02:33 UTC+1, Robert Turner a écrit : >>> >>>> Are you saying that the data is not stored in the database? I was >>>> thinking that your post was a little unclear. I'm not too sure I can solve >>>> that problem which is strange if the driver is running capturing the data. >>>> >>>> On Monday, December 16, 2024 at 2:02:43 PM UTC-5 Jean-Marie Schneider >>>> wrote: >>>> >>>>> Hello, >>>>> >>>>> I did not found where is coming this issue. And surprisingly when I >>>>> run weewxd, data's are correctly save into the database ! >>>>> Any help will be appreciated ;) ! >>>>> >>>>> >>>>> >>>>> Le dimanche 15 décembre 2024 à 11:49:59 UTC+1, Jean-Marie Schneider a >>>>> écrit : >>>>> >>>>>> Hello, >>>>>> >>>>>> Robert I use your Interceptor.py file, and your conf set as you. >>>>>> it is OK for receiving the data's : >>>>>> ~ $ sudo weewxd >>>>>> Using configuration file /etc/weewx/weewx.conf >>>>>> LOOP: 2024-12-15 11:44:09 CET (1734259449) 'altimeter': 'None', >>>>>> 'appTemp': '45.17646502340741', 'barometer': '30.11', 'cloudbase': >>>>>> '454.4292200824276', 'dateTime': '1734259449', 'dewpoint': '47.2', 'ET': >>>>>> 'None', 'heatindex': '46.603', 'humidex': '48.589000630562424', >>>>>> 'inDewpoint': 'None', 'maxSolarRad': '248.1637619033187', 'outHumidity': >>>>>> '99.0', 'outTemp': '47.5', 'pressure': 'None', 'rain': 'None', >>>>>> 'rainRate': >>>>>> '0.0', 'usUnits': '1', 'UV': '0.0', 'windchill': '47.5', 'windDir': >>>>>> '20.0', >>>>>> 'windGust': '4.4', 'windrun': 'None', 'windSpeed': '3.0' >>>>>> LOOP: 2024-12-15 11:45:14 CET (1734259514) 'altimeter': 'None', >>>>>> 'appTemp': '45.90871472340741', 'barometer': '30.11', 'cloudbase': >>>>>> '454.4292200824276', 'dateTime': '1734259514', 'dewpoint': '47.2', 'ET': >>>>>> 'None', 'heatindex': '46.603', 'humidex': '48.589000630562424', >>>>>> 'inDewpoint': 'None', 'maxSolarRad': '249.19217896926534', >>>>>> 'outHumidity': >>>>>> '99.0', 'outTemp': '47.5', 'pressure': 'None', 'rain': '0.0', >>>>>> 'rainRate': >>>>>> '0.0', 'usUnits': '1', 'UV': '0.0', 'windchill': '47.5', 'windDir': >>>>>> '7.0', >>>>>> 'windGust': '3.4', 'windrun': 'None', 'windSpeed': '1.7' >>>>>> >>>>>> Thanks you Robert for this updated file. >>>>>> >>>>>> Now run the daemon, the database is created but not data's are saved. >>>>>> I will search for this issu ! >>>>>> >>>>>> Had a good end of week end ! >>>>>> >>>>>> >>>>>> Le samedi 14 décembre 2024 à 23:36:16 UTC+1, Jean-Marie Schneider a >>>>>> écrit : >>>>>> >>>>>>> Robert, I will try tomorrow, after a good nigh hopefully ! >>>>>>> And I have a doubt about my installation of weewx. Let see >>>>>>> tomorrow... >>>>>>> >>>>>>> Le samedi 14 décembre 2024 à 22:16:40 UTC+1, Robert Turner a écrit : >>>>>>> >>>>>>>> This is how my conf is set. >>>>>>>> [Interceptor] >>>>>>>> driver = user.interceptor >>>>>>>> device_type = wu-client >>>>>>>> mode = sniff >>>>>>>> iface = wlan0 >>>>>>>> pcap_filter = src 192.168.5.131 and dst port 80 >>>>>>>> >>>>>>>> Are you using the original interceptor.py or the one I modified? >>>>>>>> On Saturday, December 14, 2024 at 4:04:58 PM UTC-5 Jean-Marie >>>>>>>> Schneider wrote: >>>>>>>> >>>>>>>>> >>>>>>>>> Thanks you Robert. I try it. >>>>>>>>> >>>>>>>>> I have set an AP, and this time I see the flow of data between my >>>>>>>>> station and wunderground.com : >>>>>>>>> 37 130.019998 10.42.0.13 34.232.250.77 HTTP 402 GET >>>>>>>>> /weatherstation/updateweatherstation.php?ID=ISAINT8047&PASSWORD=abc456&dateutc=2024-12-11+18%3A50%3A3&baromin=29.92&tempf=40.7&humidity=86&dewptf=36.7&rainin=0&dailyrainin=0&winddir=267&windspeedmph=3.2&windgustmph=4.9&UV=0&solarRadiation=0 >>>>>>>>> >>>>>>>>> HTTP/1.1 >>>>>>>>> Frame 5: 403 bytes on wire (3224 bits), 403 bytes captured (3224 >>>>>>>>> bits) >>>>>>>>> Ethernet II, Src: BouffaloLab_ab:75:d3 (b8:3d:fb:ab:75:d3), Dst: >>>>>>>>> RaspberryPi_5d:f0:b2 (2c:cf:67:5d:f0:b2) >>>>>>>>> Destination: RaspberryPi_5d:f0:b2 (2c:cf:67:5d:f0:b2) >>>>>>>>> Source: BouffaloLab_ab:75:d3 (b8:3d:fb:ab:75:d3) >>>>>>>>> Type: IPv4 (0x0800) >>>>>>>>> [Stream index: 0] >>>>>>>>> Internet Protocol Version 4, Src: 10.42.0.13, Dst: 34.232.250.77 >>>>>>>>> Transmission Control Protocol, Src Port: 53970, Dst Port: 80, Seq: >>>>>>>>> 1, Ack: 1, Len: 349 >>>>>>>>> Source Port: 53970 >>>>>>>>> Destination Port: 80 >>>>>>>>> >>>>>>>>> I perform a first modification with port setting : >>>>>>>>> >>>>>>>>> [Interceptor] >>>>>>>>> driver = user.interceptor >>>>>>>>> iface = wlan0 >>>>>>>>> port = 53970 >>>>>>>>> pcap_filter = src 10.42.0.13 >>>>>>>>> >>>>>>>>> >>>>>>>>> Weewxd run, as well weewx, but no data are obtained. I discover >>>>>>>>> that the port is dynamically set (next connexion, it is 53971, and so >>>>>>>>> one. >>>>>>>>> But, if a don't set the port, weewx did not start with the >>>>>>>>> following error : >>>>>>>>> >>>>>>>>> ERROR weewx.engine: Import of driver failed: [Errno 13] Permission >>>>>>>>> non accordée (<class 'PermissionError'>) >>>>>>>>> >>>>>>>>> I read the page of permissions >>>>>>>>> <https://github.com/weewx/weewx/wiki/Understanding-permissions#how-to-fix-network-permissions> >>>>>>>>> and >>>>>>>>> allowing no method seams easy, especially as the port used by my pws >>>>>>>>> is >>>>>>>>> upper than 1024, the simpler will be to listen all the port upper >>>>>>>>> than >>>>>>>>> 1024, or some thing like this. But I have till now not found how to >>>>>>>>> set >>>>>>>>> that filter. Any help will be welcome ! >>>>>>>>> >>>>>>>>> Jean-Marie >>>>>>>>> Le jeudi 12 décembre 2024 à 00:16:27 UTC+1, Robert Turner a écrit : >>>>>>>>> >>>>>>>>>> This version of the interceptor will be able to sniff the WLAN0 >>>>>>>>>> in AP mode. >>>>>>>>>> >>>>>>>>>> On Tuesday, December 10, 2024 at 4:22:47 PM UTC-5 Jean-Marie >>>>>>>>>> Schneider wrote: >>>>>>>>>> >>>>>>>>>>> Thanks you for yours answer. >>>>>>>>>>> @vince : I am such of the IP. As already said, turning of the WS >>>>>>>>>>> let the ping without answer. And the four Devolo are recognize by >>>>>>>>>>> Advance >>>>>>>>>>> IP Scanner. They have a different IP than the WS. >>>>>>>>>>> >>>>>>>>>>> @Robert : I will learn how to set up an access point, and come >>>>>>>>>>> back with the results. >>>>>>>>>>> >>>>>>>>>>> Le mardi 10 décembre 2024 à 03:10:37 UTC+1, Robert Turner a >>>>>>>>>>> écrit : >>>>>>>>>>> >>>>>>>>>>>> I'm not completely sure of your network layout. I believe you >>>>>>>>>>>> can't sniff wifi traffic with just connecting to the same wifi >>>>>>>>>>>> network. >>>>>>>>>>>> Traffic from a device on wifi going to the internet is not >>>>>>>>>>>> rebroadcast to >>>>>>>>>>>> all devices on the wifi. If your device is connected to wifi and >>>>>>>>>>>> it's >>>>>>>>>>>> sending data to the internet it would go through the wifi router >>>>>>>>>>>> to the WAN >>>>>>>>>>>> port of the router. It wouldn't show up on the Wifi network or >>>>>>>>>>>> LAN. You >>>>>>>>>>>> possibly could tap it by mirroring the data on the WAN port. >>>>>>>>>>>> I did do this a little differently with my wifi weather >>>>>>>>>>>> station. I configured the pi to be an access point with its >>>>>>>>>>>> wireless >>>>>>>>>>>> adapter and the ethernet port connected to my router. I setup the >>>>>>>>>>>> access >>>>>>>>>>>> point on the pi to route to the ethernet port and connected the >>>>>>>>>>>> weather >>>>>>>>>>>> station to the pi access point. I modified the interceptor to use >>>>>>>>>>>> tcpdump >>>>>>>>>>>> to capture data on the pi wlan0. The modification was necessary >>>>>>>>>>>> because the >>>>>>>>>>>> interceptor was not able to sniff the wlan0 on the pi when it was >>>>>>>>>>>> in access >>>>>>>>>>>> point mode. >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> On Monday, December 9, 2024 at 3:12:28 PM UTC-5 vince wrote: >>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> Your wireshark sniffer settings have to be incorrect. My wild >>>>>>>>>>>>> guess in the absence of a network diagram showing which address >>>>>>>>>>>>> is where >>>>>>>>>>>>> would be that your Devolo LAN PLC is the source address to WU, >>>>>>>>>>>>> not the >>>>>>>>>>>>> address of the weather station. >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> On Monday, December 9, 2024 at 11:51:34 AM UTC-8 Jean-Marie >>>>>>>>>>>>> Schneider wrote: >>>>>>>>>>>>> >>>>>>>>>>>>>> Hello, >>>>>>>>>>>>>> >>>>>>>>>>>>>> I have set up a VEVOR 7-in-1 Wi-Fi Weather Station and would >>>>>>>>>>>>>> like to connect it to WeeWX. >>>>>>>>>>>>>> >>>>>>>>>>>>>> I believe that the WeeWX-interceptor could be a solution, or >>>>>>>>>>>>>> at least worth trying! I installed WeeWX and the interceptor >>>>>>>>>>>>>> without any >>>>>>>>>>>>>> issues. Before attempting to connect my station, I want to >>>>>>>>>>>>>> verify the data >>>>>>>>>>>>>> being sent to wunderground.com, where my station transmits >>>>>>>>>>>>>> its data, or at least check if I can see them. >>>>>>>>>>>>>> >>>>>>>>>>>>>> My configuration is as follows: >>>>>>>>>>>>>> >>>>>>>>>>>>>> - The weather station is connected via Wi-Fi to a Devolo >>>>>>>>>>>>>> Wi-Fi network (using Powerline Communication, PLC). >>>>>>>>>>>>>> - The reception is done by the Devolo LAN (through PLC). >>>>>>>>>>>>>> - The Devolo LAN is connected to my router. >>>>>>>>>>>>>> >>>>>>>>>>>>>> From my computer, which is also connected through the Devolo >>>>>>>>>>>>>> Wi-Fi, I determined the station's IP address using ZeNMAP >>>>>>>>>>>>>> (confirmed by >>>>>>>>>>>>>> powering off the station: when I ping the IP, I get no response >>>>>>>>>>>>>> from the >>>>>>>>>>>>>> station). Using Wireshark, I monitor the flow on the Wi-Fi >>>>>>>>>>>>>> (wlan0), and >>>>>>>>>>>>>> there is a lot of traffic. I applied a filter for the station's >>>>>>>>>>>>>> IP address, >>>>>>>>>>>>>> but then I observe nothing—no traffic!? >>>>>>>>>>>>>> >>>>>>>>>>>>>> I also scanned the LAN, but still no additional data. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Next, I placed an Ethernet Network Tap between the router and >>>>>>>>>>>>>> the Devolo LAN. I connected a Raspberry Pi to this tap and >>>>>>>>>>>>>> monitored the >>>>>>>>>>>>>> LAN activity using tcpdump, but again, there was nothing related >>>>>>>>>>>>>> to my >>>>>>>>>>>>>> station. >>>>>>>>>>>>>> >>>>>>>>>>>>>> I'm struggling to understand why! The station's data is >>>>>>>>>>>>>> visible on the Wunderground site, updated every minute. It's not >>>>>>>>>>>>>> a pigeon >>>>>>>>>>>>>> delivering the data... So, my question is: what am I doing wrong? >>>>>>>>>>>>>> >>>>>>>>>>>>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion visit https://groups.google.com/d/msgid/weewx-user/0d937172-129f-4a74-9acb-d5c95d8e54bdn%40googlegroups.com.
