Just do what I asked please. See what interface and src address it hears port 80 traffic hyou’re expecting on. It might even be loopback.
On Wednesday, November 20, 2024 at 5:58:22 PM UTC-8 Robert Turner wrote: > Thanks for the help. I am sure the ip is correct. If I use arp -a I can > see the device > > (192.168.5.131) at 8c:18:d9:72:e1:43 [ether] on wlan0 > > The weather station is the only device connect to the AP. > > I also know that is the DHCP lease given to the station > /var/lib/misc/dnsmasq.leases > > 732239204 8c:18:d9:72:e1:43 192.168.5.131 192 01:8c:18:d9:72:e1:43 > > I also went ahead and made that lease in dnsmasq.conf so the ip would not > change > > dhcp-host=8c:18:d9:72:e1:43,192.168.5.131/24 > > My station is the WS-1001 WIFI from ambient weather. I am starting to > think I may not get it to work. > > > On Wednesday, November 20, 2024 at 7:42:42 PM UTC-5 vince wrote: > >> I would take weewx out of the picture temporarily and try running >> wireshark and see what it hears, potentially fiddling with those options a >> bit. In the absence of info on what interface/where has which address, >> my wild guess is your src address might be wrong perhaps… >> >> On Wednesday, November 20, 2024 at 4:13:27 PM UTC-8 Robert Turner wrote: >> >>> I have weewx installed and the interceptor driver setup. I have a wifi >>> station that has built in wunderground updating. On my pi the station is >>> connected to the wlan0 which is setup as an accesspoint with routing setup >>> to eth0 which has internet access. >>> >>> The station is connecting and sending data to wunderground. I can see it >>> constantly updating on the site. With the interceptor driver in sniff it is >>> not getting the data. >>> >>> I ran the driver directly >>> >>> sudo PYTHONPATH=/usr/share/weewx python3 interceptor.py >>> --device=wu-client --mode=sniff --iface=wlan0 --filter="src 192.168.5.131 >>> and dst port 80" >>> >>> The ip address is correct for the station. I let it run for a period of >>> time and don't see any output. >>> >>> Thanks >>> >>> >>> >>> >>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion visit https://groups.google.com/d/msgid/weewx-user/87bd5d5c-91a4-4be0-b058-4a7b73e9c69an%40googlegroups.com.
