I would take weewx out of the picture temporarily and try running wireshark and see what it hears, potentially fiddling with those options a bit. In the absence of info on what interface/where has which address, my wild guess is your src address might be wrong perhaps…
On Wednesday, November 20, 2024 at 4:13:27 PM UTC-8 Robert Turner wrote: > I have weewx installed and the interceptor driver setup. I have a wifi > station that has built in wunderground updating. On my pi the station is > connected to the wlan0 which is setup as an accesspoint with routing setup > to eth0 which has internet access. > > The station is connecting and sending data to wunderground. I can see it > constantly updating on the site. With the interceptor driver in sniff it is > not getting the data. > > I ran the driver directly > > sudo PYTHONPATH=/usr/share/weewx python3 interceptor.py --device=wu-client > --mode=sniff --iface=wlan0 --filter="src 192.168.5.131 and dst port 80" > > The ip address is correct for the station. I let it run for a period of > time and don't see any output. > > Thanks > > > > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion visit https://groups.google.com/d/msgid/weewx-user/073e5ff4-4768-4e7d-83e8-bad70768885dn%40googlegroups.com.
