Hi Gary, It works very well now.
Thank you for your help. Jarda čt 1. 8. 2024 v 13:12 odesílatel gjr80 <gjroder...@gmail.com> napsal: > As Rainer mentioned the issue is likely that the unit group has not been > defined for the PM4 obs type in your database (though this will depend on > your driver setup, database schema and skin you are using). Unit groups for > additional obs types are often defined by the user in extensions.py, but > can also be done in the driver. The gateway driver does define unit groups > for all WeeWX fields in the default field map that do not appear in the > default WeeWX schema (ie the wview_extended schema). I neglected to > update this portion of the driver for the new/updated 'PM' fields in > v0.6.3.b1, I have since made the necessary changes. If you delete the > v0.6.3b1 driver using: > > $ rm /etc/weewx/bin/user/gw1000.py > > and then download v0.6.3b2 in it's place using: > > $ wget -P /etc/weewx/bin/user > https://raw.githubusercontent.com/gjr80/weewx-gw1000/v0.6.3/bin/user/gw1000.py > > and finally restart WeeWX your PM4 data should display with correct > formatting/labelling. > > Gary > > On Thursday 1 August 2024 at 16:08:48 UTC+10 j.fri...@gmail.com wrote: > >> Hi Gary, >> >> the v0.6.3b1 works wery well. There is only one possible issue with PMI >> 4. index.html page shows it in other way then others values . >> >> Thank you very much for your help. >> >> Jarda >> >> *Outout from the driver :* >> 'pm1_0': '9.5', 'pm1_0_24h_avg': '1.5', 'pm2_55': '10.6', >> 'pm2_55_24h_avg': '2.5', 'pm4_0': '11.0', 'pm4_0_24h_avg': '3.2', 'pm10_0': >> '11.2', 'pm10_0_24h_avg': '3.6' >> >> *Database values :* >> PM1.0 = 10.6333333333333 >> PM2.5 = 11.7 >> PM4.0 = 12.0666666666667 >> PM10 = 12.2666666666667 >> >> *Index.html page :* >> [image: Výstřižek.PNG] >> >> >> >> Dne úterý 30. července 2024 v 13:51:16 UTC+2 uživatel gjr80 napsal: >> >> You can try v0.6.3b1 which includes support for the WH46 air quality >> sensor. If a WH46 is connected the v0.6.3 driver should emit the same >> temperature, PM2.5, PM10 and CO2 fields as with a WH45. Additional fields >> pm1_0, pm1_0_24h_avg, pm4_0, pm4_0_24h_avg should also be emitted with >> the WH46 PM1 and PM4 data and 24hour averages respectively. v0.6.3 should >> also automatically determine whether a WH45 or WH46 is present and >> correctly name WH45/WH46 battery and signal state fields. >> >> Note that I have had to change the names of a the PM10 fields emitted by >> the driver when used with a WH45 sensor. This will only affect you if you >> previously used a WH45 sensor. The driver now emits pm10_0 and >> pm10_0_24h_avg fields (previously the fields were pm10 and pm10_24h_avg). >> Users who have previously used a WH45 sensor will need to either change >> their field map if mapping these fields to some other WeeWX field, or if >> the pm10 and pm10_24h_avg fields are used in the database schema the >> database fields will need to be renamed to the new field names. >> >> v0.6.3 also includes support for the WS85 sensor array as well as >> including a revised approach to device discovery that is much more reliable >> than the previous approach. Note the recommended approach remains to >> specify the device IP address in the WeeWX config file rather than have the >> driver rely on discovery >> >> I have not released v0.6.3 yet, rather I have kept it at b1 until someone >> verifies it's use it with a WH45/46. If you wish to try v0.6.3b1 the >> following instructions should be used: >> >> 1. Rename your existing gateway driver to gw1000_0_6_1.py so you can >> easily revert if necessary: >> $ cp /etc/weewx/bin/user/gw1000.py /etc/weewx/bin/user/gw1000_0_6_1.py >> >> 2. Download the v0.6.3b1 driver file and save it to /etc/weewx/bin/user: >> $ wget -P /etc/weewx/bin/user >> https://raw.githubusercontent.com/gjr80/weewx-gw1000/v0.6.3/bin/user/gw1000.py >> >> 3. You can run the driver directly as you did in you OP, you should see >> the WH46 obs fields as well as WH46 battery and signal state data. You >> might also find using the --live-data option useful when running the >> driver directly. >> >> 4. If you are happy running the driver directly you can restart WeeWX and >> it will pick up the v0.6.3 driver. >> >> Note the above commands may require prefixing with sudo. If you need to >> revert to your original driver just delete /etc/weewx/bin/user/gw1000.py and >> rename /etc/weewx/bin/user/gw1000_0_6_1.py to >> /etc/weewx/bin/user/gw1000.py. >> >> If any problems please let me know. >> >> Gary >> >> On Monday 29 July 2024 at 22:55:21 UTC+10 j.fri...@gmail.com wrote: >> >> Hello, >> >> I added new WH46 to my Ecowitt system. I can view data in ecowitt.net >> and in mobile application too. >> >> My main system is weewx https://pocasi.frimlovi.com but the new WH46 >> data didn't appear automatically in dashboard. >> >> If I run PYTHONPATH=/usr/share/weewx:/etc/weewx/bin python3 >> /etc/weewx/bin/user/gw1000.py --test-service --ip-address=my_IP it shows >> data from all measures correctly but from WH46 it shows only data about >> battery and signal - 'wh45_batt': '5', 'wh45_sig': '4' >> >> I use the latest version of GW1000 driver - 0.6.1 >> >> I tryed to add data in weewx.conf - [[field_map_extensions]] and in >> skin.conf in appearance but nothing changed. >> >> Can you help me please ? >> >> Thank you in advance. >> >> Jarda >> >> -- > You received this message because you are subscribed to a topic in the > Google Groups "weewx-user" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/weewx-user/rjVtv33PnNk/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > weewx-user+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/68515a54-d1cd-4dbd-985a-5c864017f4c4n%40googlegroups.com > <https://groups.google.com/d/msgid/weewx-user/68515a54-d1cd-4dbd-985a-5c864017f4c4n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/CANApJRFT2hncJTFmbJvBGwjh%3Dje3D5XPoHOvOAevD-tNsVMXdg%40mail.gmail.com.
