Hi, I don't think so. Other units as PM1_0 or PM2_5 etc. don't have definition in extensions.py and values show incorrect format.
Thank you for your help. čt 1. 8. 2024 v 11:52 odesílatel 'Rainer Lang' via weewx-user < weewx-user@googlegroups.com> napsal: > you probably need to define the units/unit group for pm4_0 in > extensions.py 😎 > On 01.08.2024 08:08, j.fri...@gmail.com wrote: > > Hi Gary, > > the v0.6.3b1 works wery well. There is only one possible issue with PMI > 4. index.html page shows it in other way then others values . > > Thank you very much for your help. > > Jarda > > *Outout from the driver :* > 'pm1_0': '9.5', 'pm1_0_24h_avg': '1.5', 'pm2_55': '10.6', > 'pm2_55_24h_avg': '2.5', 'pm4_0': '11.0', 'pm4_0_24h_avg': '3.2', 'pm10_0': > '11.2', 'pm10_0_24h_avg': '3.6' > > *Database values :* > PM1.0 = 10.6333333333333 > PM2.5 = 11.7 > PM4.0 = 12.0666666666667 > PM10 = 12.2666666666667 > > *Index.html page :* > [image: Výstřižek.PNG] > > > > Dne úterý 30. července 2024 v 13:51:16 UTC+2 uživatel gjr80 napsal: > > You can try v0.6.3b1 which includes support for the WH46 air quality > sensor. If a WH46 is connected the v0.6.3 driver should emit the same > temperature, PM2.5, PM10 and CO2 fields as with a WH45. Additional fields > pm1_0, pm1_0_24h_avg, pm4_0, pm4_0_24h_avg should also be emitted with > the WH46 PM1 and PM4 data and 24hour averages respectively. v0.6.3 should > also automatically determine whether a WH45 or WH46 is present and > correctly name WH45/WH46 battery and signal state fields. > > Note that I have had to change the names of a the PM10 fields emitted by > the driver when used with a WH45 sensor. This will only affect you if you > previously used a WH45 sensor. The driver now emits pm10_0 and > pm10_0_24h_avg fields (previously the fields were pm10 and pm10_24h_avg). > Users who have previously used a WH45 sensor will need to either change > their field map if mapping these fields to some other WeeWX field, or if > the pm10 and pm10_24h_avg fields are used in the database schema the > database fields will need to be renamed to the new field names. > > v0.6.3 also includes support for the WS85 sensor array as well as > including a revised approach to device discovery that is much more reliable > than the previous approach. Note the recommended approach remains to > specify the device IP address in the WeeWX config file rather than have the > driver rely on discovery > > I have not released v0.6.3 yet, rather I have kept it at b1 until someone > verifies it's use it with a WH45/46. If you wish to try v0.6.3b1 the > following instructions should be used: > > 1. Rename your existing gateway driver to gw1000_0_6_1.py so you can > easily revert if necessary: > $ cp /etc/weewx/bin/user/gw1000.py /etc/weewx/bin/user/gw1000_0_6_1.py > > 2. Download the v0.6.3b1 driver file and save it to /etc/weewx/bin/user: > $ wget -P /etc/weewx/bin/user > https://raw.githubusercontent.com/gjr80/weewx-gw1000/v0.6.3/bin/user/gw1000.py > > 3. You can run the driver directly as you did in you OP, you should see > the WH46 obs fields as well as WH46 battery and signal state data. You > might also find using the --live-data option useful when running the > driver directly. > > 4. If you are happy running the driver directly you can restart WeeWX and > it will pick up the v0.6.3 driver. > > Note the above commands may require prefixing with sudo. If you need to > revert to your original driver just delete /etc/weewx/bin/user/gw1000.py and > rename /etc/weewx/bin/user/gw1000_0_6_1.py to > /etc/weewx/bin/user/gw1000.py. > > If any problems please let me know. > > Gary > > On Monday 29 July 2024 at 22:55:21 UTC+10 j.fri...@gmail.com wrote: > > Hello, > > I added new WH46 to my Ecowitt system. I can view data in ecowitt.net and > in mobile application too. > > My main system is weewx https://pocasi.frimlovi.com but the new WH46 data > didn't appear automatically in dashboard. > > If I run PYTHONPATH=/usr/share/weewx:/etc/weewx/bin python3 > /etc/weewx/bin/user/gw1000.py --test-service --ip-address=my_IP it shows > data from all measures correctly but from WH46 it shows only data about > battery and signal - 'wh45_batt': '5', 'wh45_sig': '4' > > I use the latest version of GW1000 driver - 0.6.1 > > I tryed to add data in weewx.conf - [[field_map_extensions]] and in > skin.conf in appearance but nothing changed. > > Can you help me please ? > > Thank you in advance. > > Jarda > > -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to weewx-user+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/5d259c56-7ed4-46aa-8185-3b7fcb55c289n%40googlegroups.com > <https://groups.google.com/d/msgid/weewx-user/5d259c56-7ed4-46aa-8185-3b7fcb55c289n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to a topic in the > Google Groups "weewx-user" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/weewx-user/rjVtv33PnNk/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > weewx-user+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/b5c0dc8b-438c-4919-8f60-d99d23d71d84%40gmail.com > <https://groups.google.com/d/msgid/weewx-user/b5c0dc8b-438c-4919-8f60-d99d23d71d84%40gmail.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/CANApJRFwJ6U6E-fXAnpEunrQKnYUBZKWCwsa%3DfRH9S-nmsQwfQ%40mail.gmail.com.
