Hello, please help.
Weewx does not work. No run, no generate html.
Ubuntu server 16.04
Oregon WMR300 Station (connect to USB), data and time -good
Config and log attached.
P.S.Sorry for my bad english.
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/2601a253-8872-4f2a-b40b-05634cb1e29e%40googlegroups.com.
# WEEWX CONFIGURATION FILE
#
# Copyright (c) 2009-2019 Tom Keffer <[email protected]>
# See the file LICENSE.txt for your rights.
##############################################################################
# This section is for general configuration information.
# Set to 1 for extra debug info, otherwise comment it out or set to zero
debug = 1
# Root directory of the weewx data file hierarchy for this station
WEEWX_ROOT = /
# Whether to log successful operations
log_success = True
# Whether to log unsuccessful operations
log_failure = True
# How long to wait before timing out a socket (FTP, HTTP) connection
socket_timeout = 20
# Do not modify this. It is used when installing and updating weewx.
version = 3.9.2
##############################################################################
# This section is for information about the station.
[Station]
# Description of the station location
location = "Vashkovo"
# Latitude and longitude in decimal degrees
latitude = 58.548
longitude = 30.979
# Altitude of the station, with unit it is in. This is downloaded from
# from the station if the hardware supports it.
altitude = 40, meter
# Set to type of station hardware. There must be a corresponding stanza
# in this file with a 'driver' parameter indicating the driver to be used.
station_type = WMR300
# If you have a website, you may specify an URL
#station_url = http://www.example.com
# The start of the rain year (1=January; 10=October, etc.). This is
# downloaded from the station if the hardware supports it.
rain_year_start = 1
# Start of week (0=Monday, 6=Sunday)
week_start = 0
##############################################################################
[WMR300]
# This section is for WMR300 weather stations.
# The station model, e.g., WMR300A
model = WMR300
# The driver to use:
driver = weewx.drivers.wmr300
##############################################################################
# This section is for uploading data to Internet sites
[StdRESTful]
[[StationRegistry]]
# To register this weather station with weewx, set this to true
register_this_station = false
[[AWEKAS]]
# This section is for configuring posts to AWEKAS.
# If you wish to do this, set the option 'enable' to true,
# and specify a username and password.
# To guard against parsing errors, put the password in quotes.
enable = false
username = replace_me
password = replace_me
[[CWOP]]
# This section is for configuring posts to CWOP.
# If you wish to do this, set the option 'enable' to true,
# and specify the station ID (e.g., CW1234).
enable = false
station = replace_me
# If this is an APRS (radio amateur) station, uncomment
# the following and replace with a passcode (e.g., 12345).
#passcode = replace_me (APRS stations only)
[[PWSweather]]
# This section is for configuring posts to PWSweather.com.
# If you wish to do this, set the option 'enable' to true,
# and specify a station and password.
# To guard against parsing errors, put the password in quotes.
enable = false
station = replace_me
password = replace_me
[[WOW]]
# This section is for configuring posts to WOW.
# If you wish to do this, set the option 'enable' to true,
# and specify a station and password.
# To guard against parsing errors, put the password in quotes.
enable = false
station = replace_me
password = replace_me
[[Wunderground]]
# This section is for configuring posts to the Weather Underground.
# If you wish to do this, set the option 'enable' to true,
# and specify a station (e.g., 'KORHOODR3') and password.
# To guard against parsing errors, put the password in quotes.
enable = false
station = replace_me
password = replace_me
# Set the following to True to have weewx use the WU "Rapidfire"
# protocol. Not all hardware can support it. See the User's Guide.
rapidfire = False
##############################################################################
# This section specifies what reports, using which skins, to generate.
[StdReport]
# Where the skins reside, relative to WEEWX_ROOT
SKIN_ROOT = /etc/weewx/skins
# Where the generated reports should go, relative to WEEWX_ROOT
HTML_ROOT = /var/www/html/weewx
# The database binding indicates which data should be used in reports.
data_binding = wx_binding
# Whether to log a successful operation
log_success = True
# Whether to log an unsuccessful operation
log_failure = False
# Each of the following subsections defines a report that will be run.
# See the customizing guide to change the units, plot types and line
# colors, modify the fonts, display additional sensor data, and other
# customizations. Many of those changes can be made here by overriding
# parameters, or by modifying templates within the skin itself.
[[SeasonsReport]]
# The SeasonsReport uses the 'Seasons' skin, which contains the
# images, templates and plots for the report.
skin = Seasons
enable = true
[[SmartphoneReport]]
# The SmartphoneReport uses the 'Smartphone' skin, and the images and
# files are placed in a dedicated subdirectory.
skin = Smartphone
enable = false
HTML_ROOT = /var/www/html/weewx/smartphone
[[MobileReport]]
# The MobileReport uses the 'Mobile' skin, and the images and files
# are placed in a dedicated subdirectory.
skin = Mobile
enable = false
HTML_ROOT = /var/www/html/weewx/mobile
[[StandardReport]]
# This is the old "Standard" skin. By default, it is not enabled.
skin = Standard
enable = false
[[FTP]]
# FTP'ing the results to a webserver is treated as just another report,
# albeit one with an unusual report generator!
skin = Ftp
# If you wish to use FTP, set "enable" to "true", then
# fill out the next four lines.
# Use quotes around passwords to guard against parsing errors.
enable = false
user = replace_me
password = replace_me
server = replace_me # The ftp server name, e.g, www.myserver.org
path = replace_me # The destination directory, e.g., /weather
# Set to True for an FTP over TLS (FTPS) connection. Not all servers
# support this.
secure_ftp = False
# To upload files from something other than what HTML_ROOT is set
# to above, specify a different HTML_ROOT here.
#HTML_ROOT = /var/www/html/weewx
# Most FTP servers use port 21
port = 21
# Set to 1 to use passive mode, zero for active mode
passive = 1
[[RSYNC]]
# rsync'ing to a webserver is treated as just another report
skin = Rsync
# If you wish to use rsync, you must configure passwordless ssh using
# public/private key authentication from the user account that weewx
# runs to the user account on the remote machine where the files
# will be copied.
#
# If you wish to use rsync, set "enable" to "true", then
# fill out server, user, and path.
# The server should appear in your .ssh/config file.
# The user is the username used in the identity file.
# The path is the destination directory, such as /var/www/html/weather.
# Be sure that the user has write permissions on the destination!
enable = false
server = replace_me
user = replace_me
path = replace_me
# To upload files from something other than what HTML_ROOT is set
# to above, specify a different HTML_ROOT here.
#HTML_ROOT = /var/www/html/weewx
# Rsync can be configured to remove files from the remote server if
# they don't exist under HTML_ROOT locally. USE WITH CAUTION: if you
# make a mistake in the remote path, you could could unintentionally
# cause unrelated files to be deleted. Set to 1 to enable remote file
# deletion, zero to allow files to accumulate remotely.
delete = 0
####
# Various options for customizing your reports.
[[Defaults]]
[[[Units]]]
# The following section sets what unit to use for each unit group.
# NB: The unit is always in the singular. I.e., 'mile_per_hour',
# NOT 'miles_per_hour'
[[[[Groups]]]]
group_altitude = meter # Options are 'foot' or 'meter'
group_degree_day = degree_C_day # Options are 'degree_F_day'
or 'degree_C_day'
group_pressure = mmHg # Options are 'inHg', 'mmHg', 'mbar',
or 'hPa'
group_rain = mm # Options are 'inch', 'cm', or 'mm'
group_rainrate = mm_per_hour # Options are 'inch_per_hour',
'cm_per_hour', or 'mm_per_hour'
group_speed = meter_per_hour # Options are 'mile_per_hour',
'km_per_hour', 'knot', or 'meter_per_second'
group_speed2 = meter_per_hour2 # Options are
'mile_per_hour2', 'km_per_hour2', 'knot2', or 'meter_per_second2'
group_temperature = degree_C # Options are 'degree_F' or
'degree_C'
# The following section sets the formatting for each type of unit.
[[[[StringFormats]]]]
centibar = %.0f
cm = %.2f
cm_per_hour = %.2f
degree_C = %.1f
degree_F = %.1f
degree_compass = %.0f
foot = %.0f
hPa = %.1f
hour = %.1f
inHg = %.3f
inch = %.2f
inch_per_hour = %.2f
km_per_hour = %.0f
km_per_hour2 = %.1f
knot = %.0f
knot2 = %.1f
mbar = %.1f
meter = %.0f
meter_per_second = %.1f
meter_per_second2 = %.1f
mile_per_hour = %.0f
mile_per_hour2 = %.1f
mm = %.1f
mmHg = %.1f
mm_per_hour = %.1f
percent = %.0f
second = %.0f
uv_index = %.1f
volt = %.1f
watt_per_meter_squared = %.0f
NONE = " N/A"
# The following section sets the label for each type of unit
[[[[Labels]]]]
day = " day", " days"
hour = " hour", " hours"
minute = " minute", " minutes"
second = " second", " seconds"
NONE = ""
# The following section sets the format for each time scale.
# The values below will work in every locale, but they may not look
# particularly attractive.
[[[[TimeFormats]]]]
hour = %H:%M
day = %X
week = %X (%A)
month = %x %X
year = %x %X
rainyear = %x %X
current = %x %X
ephem_day = %X
ephem_year = %x %X
[[[[Ordinates]]]]
# Ordinal directions. The last one is for no wind direction
directions = N, NNE, NE, ENE, E, ESE, SE, SSE, S, SSW, SW, WSW,
W, WNW, NW, NNW, N/A
# The following section sets the base temperatures used for the
# calculation of heating and cooling degree-days.
[[[[[DegreeDays]]]]]
# Base temperature for heating days, with unit:
heating_base = 65, degree_F
# Base temperature for cooling days, with unit:
cooling_base = 65, degree_F
# A trend takes a difference across a time period. The following
# section sets the time period, and how big an error is allowed
to
# still be counted as the start or end of a period.
[[[[[Trend]]]]]
time_delta = 10800 # 3 hours
time_grace = 300 # 5 minutes
# The labels to be used for each observation type
[[[Labels]]]
# Set to hemisphere abbreviations suitable for your location:
hemispheres = N, S, E, W
# Formats to be used for latitude whole degrees, longitude whole
# degrees, and minutes:
latlon_formats = %02d, %03d, %05.2f
# Generic labels, keyed by an observation type.
[[[[Generic]]]]
barometer = Barometer
dewpoint = Dew Point
ET = ET
heatindex = Heat Index
inHumidity = Inside Humidity
inTemp = Inside Temperature
outHumidity = Humidity
outTemp = Outside Temperature
radiation = Radiation
rain = Rain
rainRate = Rain Rate
UV = UV Index
windDir = Wind Direction
windGust = Gust Speed
windGustDir = Gust Direction
windSpeed = Wind Speed
windchill = Wind Chill
windgustvec = Gust Vector
windvec = Wind Vector
extraTemp1 = Temperature1
extraTemp2 = Temperature2
extraTemp3 = Temperature3
# Sensor status indicators
rxCheckPercent = Signal Quality
txBatteryStatus = Transmitter Battery
windBatteryStatus = Wind Battery
rainBatteryStatus = Rain Battery
outTempBatteryStatus = Outside Temperature Battery
inTempBatteryStatus = Inside Temperature Battery
consBatteryVoltage = Console Battery
heatingVoltage = Heating Battery
supplyVoltage = Supply Voltage
referenceVoltage = Reference Voltage
[[[Almanac]]]
# The labels to be used for the phases of the moon:
moon_phases = New, Waxing crescent, First quarter, Waxing gibbous,
Full, Waning gibbous, Last quarter, Waning crescent
##############################################################################
# This service acts as a filter, converting the unit system coming from
# the hardware to a unit system in the database.
[StdConvert]
# The target_unit affects only the unit system in the database. Once
# chosen it cannot be changed without converting the entire database.
# Modification of target_unit after starting weewx will result in
# corrupt data - the database will contain a mix of US and METRIC data.
#
# The value of target_unit does not affect the unit system for
# reporting - reports can display US, Metric, or any combination of units.
#
# In most cases, target_unit should be left as the default: US
#
# In particular, those migrating from a standard wview installation
# should use US since that is what the wview database contains.
# DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING!
target_unit = US # Options are 'US', 'METRICWX', or 'METRIC'
##############################################################################
# This section can adjust data using calibration expressions.
[StdCalibrate]
[[Corrections]]
# For each type, an arbitrary calibration expression can be given.
# It should be in the units defined in the StdConvert section.
# Example:
foo = foo + 0.2
##############################################################################
# This section is for quality control checks. If units are not specified,
# values must be in the units defined in the StdConvert section.
[StdQC]
[[MinMax]]
barometer = 26, 32.5, inHg
pressure = 24, 34.5, inHg
outTemp = -40, 120, degree_F
inTemp = 10, 120, degree_F
outHumidity = 0, 100
inHumidity = 0, 100
windSpeed = 0, 120, mile_per_hour
rain = 0, 10, inch
##############################################################################
# This section controls the origin of derived values.
[StdWXCalculate]
[[Calculations]]
# How to calculate derived quantities. Possible values are:
# hardware - use the value provided by hardware
# software - use the value calculated by weewx
# prefer_hardware - use value provide by hardware if available,
# otherwise use value calculated by weewx
pressure = prefer_hardware
barometer = prefer_hardware
altimeter = prefer_hardware
windchill = hardware
heatindex = hardware
dewpoint = software
inDewpoint = prefer_hardware
rainRate = hardware
##############################################################################
# For hardware that supports it, this section controls how often the
# onboard clock gets updated.
[StdTimeSynch]
# How often to check the weather station clock for drift (in seconds)
clock_check = 14400
# How much it can drift before we will correct it (in seconds)
max_drift = 5
##############################################################################
# This section is for configuring the archive service.
[StdArchive]
# If the station hardware supports data logging then the archive interval
# will be downloaded from the station. Otherwise, specify it (in seconds).
archive_interval = 30
# If possible, new archive records are downloaded from the station
# hardware. If the hardware does not support this, then new archive
# records will be generated in software.
# Set the following to "software" to force software record generation.
record_generation = hardware
# Whether to include LOOP data in hi/low statistics
loop_hilo = True
# The data binding used to save archive records
data_binding = wx_binding
##############################################################################
# This section binds a data store to a database.
[DataBindings]
[[wx_binding]]
# The database must match one of the sections in [Databases].
# This is likely to be the only option you would want to change.
database = archive_sqlite
# The name of the table within the database
table_name = archive
# The manager handles aggregation of data for historical summaries
manager = weewx.wxmanager.WXDaySummaryManager
# The schema defines the structure of the database.
# It is *only* used when the database is created.
schema = schemas.wview.schema
##############################################################################
# This section defines various databases.
[Databases]
# A SQLite database is simply a single file
[[archive_sqlite]]
database_name = weewx.sdb
database_type = SQLite
# MySQL
[[archive_mysql]]
database_name = weewx
database_type = MySQL
##############################################################################
# This section defines defaults for the different types of databases.
[DatabaseTypes]
# Defaults for SQLite databases
[[SQLite]]
driver = weedb.sqlite
# Directory in which the database files are located
SQLITE_ROOT = /var/lib/weewx
# Defaults for MySQL databases
[[MySQL]]
driver = weedb.mysql
# The host where the database is located
host = localhost
# The user name for logging in to the host
user = weewx
# The password for the user name (quotes guard against parsing errors)
password = weewx
##############################################################################
# This section configures the internal weewx engine.
[Engine]
[[Services]]
# This section specifies the services that should be run. They are
# grouped by type, and the order of services within each group
# determines the order in which the services will be run.
prep_services = weewx.engine.StdTimeSynch
data_services = ,
process_services = weewx.engine.StdConvert, weewx.engine.StdCalibrate,
weewx.engine.StdQC, weewx.wxservices.StdWXCalculate
archive_services = weewx.engine.StdArchive
restful_services = weewx.restx.StdStationRegistry,
weewx.restx.StdWunderground, weewx.restx.StdPWSweather, weewx.restx.StdCWOP,
weewx.restx.StdWOW, weewx.restx.StdAWEKAS
report_services = weewx.engine.StdPrint, weewx.engine.StdReportFeb 9 07:57:44 ubuntu-pogoda systemd[1]: Starting LSB: weewx weather system...
Feb 9 07:57:44 ubuntu-pogoda weewx[4027]: * Starting weewx weather system
weewx
Feb 9 07:57:44 ubuntu-pogoda weewx[4040]: engine: Initializing weewx version
3.9.2
Feb 9 07:57:44 ubuntu-pogoda weewx[4040]: engine: Using Python 2.7.12
(default, Oct 8 2019, 14:14:10) #012[GCC 5.4.0 20160609]
Feb 9 07:57:44 ubuntu-pogoda weewx[4040]: engine: Platform
Linux-4.4.0-31-generic-i686-with-Ubuntu-16.04-xenial
Feb 9 07:57:44 ubuntu-pogoda weewx[4040]: engine: Locale is 'ru_RU.UTF-8'
Feb 9 07:57:44 ubuntu-pogoda weewx[4040]: engine: pid file is
/var/run/weewx.pid
Feb 9 07:57:44 ubuntu-pogoda weewx[4027]: ...done.
Feb 9 07:57:44 ubuntu-pogoda systemd[1]: Started LSB: weewx weather system.
Feb 9 07:57:44 ubuntu-pogoda weewx[4044]: engine: Using configuration file
/etc/weewx/weewx.conf
Feb 9 07:57:44 ubuntu-pogoda weewx[4044]: engine: Debug is 1
Feb 9 07:57:44 ubuntu-pogoda weewx[4044]: engine: Initializing engine
Feb 9 07:57:44 ubuntu-pogoda weewx[4044]: engine: Loading station type WMR300
(weewx.drivers.wmr300)
Feb 9 07:57:44 ubuntu-pogoda weewx[4044]: wmr300: driver version is
0.19rc6+f3+l2
Feb 9 07:57:44 ubuntu-pogoda weewx[4044]: wmr300: usb info:
pyusb_version=1.0.0b2
Feb 9 07:57:44 ubuntu-pogoda weewx[4044]: wmr300: sensor map is
{'outHumidity': 'humidity_1', 'extraDewpoint6': 'dewpoint_7', 'windchill':
'windchill', 'extraDewpoint4': 'dewpoint_5', 'rainRate': 'rain_rate',
'heatindex': 'heatindex_1', 'inTemp': 'temperature_0', 'windGustDir':
'wind_gust_dir', 'extraDewpoint2': 'dewpoint_3', 'extraDewpoint3':
'dewpoint_4', 'extraDewpoint1': 'dewpoint_2', 'barometer': 'barometer',
'extraDewpoint7': 'dewpoint_8', 'dewpoint': 'dewpoint_1', 'extraDewpoint5':
'dewpoint_6', 'extraHumid6': 'humidity_7', 'pressure': 'pressure',
'extraHumid4': 'humidity_5', 'extraHumid5': 'humidity_6', 'extraHumid2':
'humidity_3', 'extraHumid3': 'humidity_4', 'extraHumid1': 'humidity_2',
'extraTemp6': 'temperature_7', 'extraTemp7': 'temperature_8', 'extraTemp4':
'temperature_5', 'extraTemp5': 'temperature_6', 'extraTemp2': 'temperature_3',
'extraTemp3': 'temperature_4', 'extraTemp1': 'temperature_2',
'extraHeatindex3': 'heatindex_4', 'extraHeatindex2': 'heatindex_3',
'extraHeatindex1': 'heatindex_2', 'extraHeatindex7': 'heatindex_8',
'extraHeatindex6': 'heatindex_7', 'extraHeatindex5': 'heatindex_6',
'extraHumid7': 'humidity_8', 'extraHeatindex4': 'heatindex_5', 'windDir':
'wind_dir', 'outTemp': 'temperature_1', 'windSpeed': 'wind_avg', 'inHumidity':
'humidity_0', 'windGust': 'wind_gust'}
Feb 9 07:57:44 ubuntu-pogoda weewx[4044]: wmr300: history limit is 20% at
index 6572
Feb 9 07:57:44 ubuntu-pogoda weewx[4044]: wmr300: Found station at bus= device=
Feb 9 07:57:44 ubuntu-pogoda kernel: [25181.953281] usb 2-1.3: reset
full-speed USB device number 3 using ehci-pci
Feb 9 07:57:45 ubuntu-pogoda weewx[4044]: wmr300: communication established:
{'history_end_index': 32735, 'station_model': 'A004', 'station_type': 'WMR300',
'mystery1': 44, 'mystery0': 73, 'history_cleared': False, 'magic1': 139,
'magic0': 136, 'packet_type': 87}
Feb 9 07:57:45 ubuntu-pogoda weewx[4044]: engine: Loading service
weewx.engine.StdTimeSynch
Feb 9 07:57:45 ubuntu-pogoda weewx[4044]: engine: Finished loading service
weewx.engine.StdTimeSynch
Feb 9 07:57:45 ubuntu-pogoda weewx[4044]: engine: Loading service
weewx.engine.StdConvert
Feb 9 07:57:45 ubuntu-pogoda weewx[4044]: engine: StdConvert target unit is 0x1
Feb 9 07:57:45 ubuntu-pogoda weewx[4044]: engine: Finished loading service
weewx.engine.StdConvert
Feb 9 07:57:45 ubuntu-pogoda weewx[4044]: engine: Loading service
weewx.engine.StdCalibrate
Feb 9 07:57:45 ubuntu-pogoda weewx[4044]: engine: Finished loading service
weewx.engine.StdCalibrate
Feb 9 07:57:45 ubuntu-pogoda weewx[4044]: engine: Loading service
weewx.engine.StdQC
Feb 9 07:57:45 ubuntu-pogoda weewx[4044]: engine: Finished loading service
weewx.engine.StdQC
Feb 9 07:57:45 ubuntu-pogoda weewx[4044]: engine: Loading service
weewx.wxservices.StdWXCalculate
Feb 9 07:57:45 ubuntu-pogoda weewx[4044]: wxcalculate: The following values
will be calculated: barometer=prefer_hardware, windchill=hardware,
dewpoint=software, appTemp=prefer_hardware, rainRate=hardware,
windrun=prefer_hardware, heatindex=hardware, maxSolarRad=prefer_hardware,
humidex=prefer_hardware, pressure=prefer_hardware, inDewpoint=prefer_hardware,
ET=prefer_hardware, altimeter=prefer_hardware, cloudbase=prefer_hardware
Feb 9 07:57:45 ubuntu-pogoda weewx[4044]: wxcalculate: The following
algorithms will be used for calculations: altimeter=aaNOAA, maxSolarRad=RS
Feb 9 07:57:45 ubuntu-pogoda weewx[4044]: engine: Finished loading service
weewx.wxservices.StdWXCalculate
Feb 9 07:57:45 ubuntu-pogoda weewx[4044]: engine: Loading service
weewx.engine.StdArchive
Feb 9 07:57:45 ubuntu-pogoda weewx[4044]: engine: Archive will use data
binding wx_binding
Feb 9 07:57:45 ubuntu-pogoda weewx[4044]: engine: Record generation will be
attempted in 'hardware'
Feb 9 07:57:45 ubuntu-pogoda weewx[4044]: engine: Using archive interval of 30
seconds (specified in weewx configuration)
Feb 9 07:57:45 ubuntu-pogoda weewx[4044]: engine: Archive delay (15) is
unusually long
Feb 9 07:57:45 ubuntu-pogoda weewx[4044]: engine: Use LOOP data in hi/low
calculations: 1
Feb 9 07:57:45 ubuntu-pogoda weewx[4044]: manager: Daily summary version is 2.0
Feb 9 07:57:45 ubuntu-pogoda weewx[4044]: engine: Using binding 'wx_binding'
to database 'weewx.sdb'
Feb 9 07:57:45 ubuntu-pogoda weewx[4044]: manager: Starting backfill of daily
summaries
Feb 9 07:57:45 ubuntu-pogoda weewx[4044]: engine: Finished loading service
weewx.engine.StdArchive
Feb 9 07:57:45 ubuntu-pogoda weewx[4044]: engine: Loading service
weewx.restx.StdStationRegistry
Feb 9 07:57:45 ubuntu-pogoda weewx[4044]: restx: StationRegistry: Registration
not requested.
Feb 9 07:57:45 ubuntu-pogoda weewx[4044]: engine: Finished loading service
weewx.restx.StdStationRegistry
Feb 9 07:57:45 ubuntu-pogoda weewx[4044]: engine: Loading service
weewx.restx.StdWunderground
Feb 9 07:57:45 ubuntu-pogoda weewx[4044]: restx: Wunderground: Posting not
enabled.
Feb 9 07:57:45 ubuntu-pogoda weewx[4044]: engine: Finished loading service
weewx.restx.StdWunderground
Feb 9 07:57:45 ubuntu-pogoda weewx[4044]: engine: Loading service
weewx.restx.StdPWSweather
Feb 9 07:57:45 ubuntu-pogoda weewx[4044]: restx: PWSweather: Posting not
enabled.
Feb 9 07:57:45 ubuntu-pogoda weewx[4044]: engine: Finished loading service
weewx.restx.StdPWSweather
Feb 9 07:57:45 ubuntu-pogoda weewx[4044]: engine: Loading service
weewx.restx.StdCWOP
Feb 9 07:57:45 ubuntu-pogoda weewx[4044]: restx: CWOP: Posting not enabled.
Feb 9 07:57:45 ubuntu-pogoda weewx[4044]: engine: Finished loading service
weewx.restx.StdCWOP
Feb 9 07:57:45 ubuntu-pogoda weewx[4044]: engine: Loading service
weewx.restx.StdWOW
Feb 9 07:57:45 ubuntu-pogoda weewx[4044]: restx: WOW: Posting not enabled.
Feb 9 07:57:45 ubuntu-pogoda weewx[4044]: engine: Finished loading service
weewx.restx.StdWOW
Feb 9 07:57:45 ubuntu-pogoda weewx[4044]: engine: Loading service
weewx.restx.StdAWEKAS
Feb 9 07:57:45 ubuntu-pogoda weewx[4044]: restx: AWEKAS: Posting not enabled.
Feb 9 07:57:45 ubuntu-pogoda weewx[4044]: engine: Finished loading service
weewx.restx.StdAWEKAS
Feb 9 07:57:45 ubuntu-pogoda weewx[4044]: engine: Loading service
weewx.engine.StdPrint
Feb 9 07:57:45 ubuntu-pogoda weewx[4044]: engine: Finished loading service
weewx.engine.StdPrint
Feb 9 07:57:45 ubuntu-pogoda weewx[4044]: engine: Loading service
weewx.engine.StdReport
Feb 9 07:57:45 ubuntu-pogoda weewx[4044]: engine: Finished loading service
weewx.engine.StdReport
Feb 9 07:57:45 ubuntu-pogoda weewx[4044]: engine: Starting up weewx version
3.9.2
Feb 9 07:57:45 ubuntu-pogoda weewx[4044]: engine: Station does not support
reading the time
Feb 9 07:57:45 ubuntu-pogoda weewx[4044]: wmr300: Reading records since
2016-12-31 03:28:00 MSK (1483144080) (last_index=31 history_end_index=32735)
Feb 9 08:01:10 ubuntu-pogoda weewx[4044]: wmr300: get history complete:
count=0 last_index=32734 history_end_index=32735
Feb 9 08:01:10 ubuntu-pogoda weewx[4044]: engine: Starting main packet loop.
Feb 9 08:01:10 ubuntu-pogoda weewx[4044]: engine: Main loop exiting. Shutting
engine down.
Feb 9 08:01:10 ubuntu-pogoda weewx[4044]: engine: Caught unrecoverable
exception in engine:
Feb 9 08:01:10 ubuntu-pogoda weewx[4044]: **** integer division or modulo
by zero
Feb 9 08:01:10 ubuntu-pogoda weewx[4044]: **** Traceback (most recent
call last):
Feb 9 08:01:10 ubuntu-pogoda weewx[4044]: **** File
"/usr/share/weewx/weewx/engine.py", line 894, in main
Feb 9 08:01:10 ubuntu-pogoda weewx[4044]: **** engine.run()
Feb 9 08:01:10 ubuntu-pogoda weewx[4044]: **** File
"/usr/share/weewx/weewx/engine.py", line 191, in run
Feb 9 08:01:10 ubuntu-pogoda weewx[4044]: ****
self.dispatchEvent(weewx.Event(weewx.NEW_LOOP_PACKET, packet=packet))
Feb 9 08:01:10 ubuntu-pogoda weewx[4044]: **** File
"/usr/share/weewx/weewx/engine.py", line 224, in dispatchEvent
Feb 9 08:01:10 ubuntu-pogoda weewx[4044]: **** callback(event)
Feb 9 08:01:10 ubuntu-pogoda weewx[4044]: **** File
"/usr/share/weewx/weewx/engine.py", line 540, in new_loop_packet
Feb 9 08:01:10 ubuntu-pogoda weewx[4044]: **** self.accumulator =
self._new_accumulator(event.packet['dateTime'])
Feb 9 08:01:10 ubuntu-pogoda weewx[4044]: **** File
"/usr/share/weewx/weewx/engine.py", line 650, in _new_accumulator
Feb 9 08:01:10 ubuntu-pogoda weewx[4044]: **** self.archive_interval)
Feb 9 08:01:10 ubuntu-pogoda weewx[4044]: **** File
"/usr/share/weewx/weeutil/weeutil.py", line 197, in startOfInterval
Feb 9 08:01:10 ubuntu-pogoda weewx[4044]: **** m = int(time_tt.tm_min
// interval_m * interval_m)
Feb 9 08:01:10 ubuntu-pogoda weewx[4044]: **** ZeroDivisionError: integer
division or modulo by zero
Feb 9 08:01:10 ubuntu-pogoda weewx[4044]: **** Exiting.
Feb 9 08:17:01 ubuntu-pogoda CRON[4070]: (root) CMD ( cd / && run-parts
--report /etc/cron.hourly)
