It is a true FTDI adapter as best as I can tell, as it works perfectly on Windows machines with the FTDI drivers. I have other adapters that have been nightmares with drivers, so I agree with your point!
On Tuesday, January 2, 2018 at 9:18:24 PM UTC-7, Craig Thom wrote: > > Have you used this FTDI adapter in other situations or a different one? > > I ask because there are apparently lots of counterfeit FTDI chips out > there. > > On Tuesday, January 2, 2018 at 10:33:25 PM UTC-5, Terry Hock wrote: >> >> Hi, >> I am trying to get the Peet Brothers Ultimeter 2100 working *reliably*. >> The issues appears to be the serial-USB converter. The system can run >> flawless for hours or at other times no more than 10 minutes and then weewx >> stops updating. I have previously used an Accurite weather station with no >> issues, so I am only changing the driver by using wee_config. >> >> Looking at the syslog file I get the following messages: >> ultimeter: driver version is 0.18 >> ultimeter: using serial port /dev/tty/USB0 >> import of driver failed: [Errorno2] could not open port /dev/ttyUSB0: >> [Errorno2] no such file or directory: '/dev/ttyUSB0' >> engine: unable to load driver: [Errorno2] could not open port >> /dev/ttryUSB0: no such file or directory: '/dev/ttyUSB0' >> **** Exiting. . . >> >> >> The USB-serial converter is an FTDI , which in the past I have found to >> very reliable. >> weewx version: 3.7.1 >> Raspberry Pi 2 >> >> Any help is greatly appreciated! >> Terry >> >> >> >> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
