Have you used this FTDI adapter in other situations or a different one? I ask because there are apparently lots of counterfeit FTDI chips out there.
On Tuesday, January 2, 2018 at 10:33:25 PM UTC-5, Terry Hock wrote: > > Hi, > I am trying to get the Peet Brothers Ultimeter 2100 working *reliably*. > The issues appears to be the serial-USB converter. The system can run > flawless for hours or at other times no more than 10 minutes and then weewx > stops updating. I have previously used an Accurite weather station with no > issues, so I am only changing the driver by using wee_config. > > Looking at the syslog file I get the following messages: > ultimeter: driver version is 0.18 > ultimeter: using serial port /dev/tty/USB0 > import of driver failed: [Errorno2] could not open port /dev/ttyUSB0: > [Errorno2] no such file or directory: '/dev/ttyUSB0' > engine: unable to load driver: [Errorno2] could not open port > /dev/ttryUSB0: no such file or directory: '/dev/ttyUSB0' > **** Exiting. . . > > > The USB-serial converter is an FTDI , which in the past I have found to > very reliable. > weewx version: 3.7.1 > Raspberry Pi 2 > > Any help is greatly appreciated! > Terry > > > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
