yes it works perfectly fine with this patch.i hope this will be pushed
to 17.07 branch as well.
Thanks for the help :)
Regards,
Prabhjot
----- Original Message -----
From:
"Akshaya Nadahalli" <aksh...@rtbrick.com>
To:
"Prabhjot Singh Sethi" <prabh...@techtrueup.com>,
<vpp-dev@lists.fd.io>, "John Lo" <l...@cisco.com>
Cc:
Sent:
Thu, 28 Sep 2017 19:18:50 +0530
Subject:
Re: [vpp-dev] vlan sub interfaces
Hi Prabhjot,
Can you pls try with below patch and see if it helps:
https://gerrit.fd.io/r/#/c/8435/ [1]
Regards,
Akshaya N
On Thursday 28 September 2017 03:45 PM, Prabhjot Singh Sethi wrote:
trying again with more appropriate subject
Can some one please help if i am missing any thing over here ?
As mentioned earlier, i have interface host-eth10 and sub interface
host-eth10.10 (create sub host-eth10 10)
host-eth10 is associated to bridge domain 2 and sub interface is
associated to bridge domain 3
when VPP receives tagged packet with vlan 10 it still associates it
to bd 2 and not bd 3
Note: if i don't associate any bd with base interface it just drops
the packet with some error.
Regards,
Prabhjot
_______________________________________________
vpp-dev mailing list
vpp-dev@lists.fd.io [2]
https://lists.fd.io/mailman/listinfo/vpp-dev [3]
--
Regards,
Akshaya N
Links:
------
[1] https://gerrit.fd.io/r/#/c/8435/
[2] mailto:vpp-dev@lists.fd.io
[3] https://lists.fd.io/mailman/listinfo/vpp-dev
_______________________________________________
vpp-dev mailing list
vpp-dev@lists.fd.io
https://lists.fd.io/mailman/listinfo/vpp-dev
