Hmmm...You are right. We use different net-masks(255.255.252.0 for wired, 255.255.192.0 for wireless) for both wired and wire-less connections. And also default gateways are different for both. I think the main reason having this problem is because of two different access point. I could see that when I am taking VNC of machine using wire-less IP then destination machine showing incoming request saying SYN_RCVD state but I think it is replying to source machine via wired connection and source machine is rejecting the response as it did not send any packat to specified wired IP. What do you say? This might be problem.
Thanks, Paresh On 6/23/08, Seak, Teng-Fong <[EMAIL PROTECTED] <[EMAIL PROTECTED]>> wrote: > > I can't give you the answer since you didn't specify the subnet > mask used in your network. > > If I take it as 255.255.0.0, then yes, yours is the same as mine. > Well, almost, actually. The computer on which VNC viewer is running > only has wired connection; it has no wireless NIC. > > If I take it as 255.255.255.0, then no, they're different. > > Actually, I was talking about logical topology. Not physical > topology. And as a matter of fact, I don't think having one access > point or two access points would change anything. > > > On Wed, Jun 18, 2008 at 10:08 AM, paresh masani <[EMAIL PROTECTED]> > wrote: > > Thanks for doing testing. Could you please make sure that the network > > topology you have tested and my network's topology(attached file) is > same. > > Please check all the three cases and Please let me know if real VNC will > > work in all cases or not. > > > > Thanks, > > Paresh > _______________________________________________ > VNC-List mailing list > VNC-List@realvnc.com > To remove yourself from the list visit: > http://www.realvnc.com/mailman/listinfo/vnc-list > _______________________________________________ VNC-List mailing list VNC-List@realvnc.com To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list
