Hey Eugene, if you can summarize a bug report and put it on github.com/EttusResearch/uhd, that'll help here. Thanks!
--M On Tue, Feb 11, 2025 at 6:45 AM Eugene Grayver <eugene.gray...@aero.org> wrote: > Hi > This was my mistake. Turns out the offset is handled correctly. However, > I think there is a bug for the N310 for setting up external LO. It works if > you specify the external LO in device arguments. However, if you set it > using a function call at run time the function call is apparently simply > ignored And the internal source is used. > This bug reveals another bug which is related to using internal for the > first two channels, and external for the last two channels. If the external > LO signal is not applied to either of the RF channel pairs, UHD fails with > a low level error that apparently comes from the embedded arm, micro > controller inside the analog devices chip. > I don’t envy ettus having to test all these quarter cases > Eugene > > > Get Outlook for iOS <https://aka.ms/o0ukef> > ------------------------------ > *From:* Eugene Grayver > *Sent:* Friday, February 7, 2025 1:55:38 PM > *To:* usrp-users <usrp-users@lists.ettus.com> > *Subject:* LO offset with external LO > > Hi, > > I am using N310 with external LO. I still want to use the digital LO > offset. However, it appears that when the LO is set to external the > digital LO offset is ignored. Am I missing something or is this the > intended behavior? UHD 4.6 > > Eugene > > > Eugene Grayver, Ph.D. > Principal Engineer > 310-336-1274 > _______________________________________________ > USRP-users mailing list -- usrp-users@lists.ettus.com > To unsubscribe send an email to usrp-users-le...@lists.ettus.com >
_______________________________________________ USRP-users mailing list -- usrp-users@lists.ettus.com To unsubscribe send an email to usrp-users-le...@lists.ettus.com
