Thanks for the reply.
I don't see how the host PC has the same IP address.
The subnets are different? I also created a separate thread for discussing
this, since it does not have anything to do with the PCIe problems discussed
earlier.
________________________________
From: Marcus D. Leech <patchvonbr...@gmail.com>
Sent: Wednesday, January 29, 2025 3:21:51 PM
To: Heinz, Dominik; Martin Braun
Cc: usrp-users@lists.ettus.com
Subject: [EXTERN] Re: [EXTERN] Re: [EXTERN] [USRP-users] Re: [EXTERN] Re:
[EXTERN] Re: Re: [EXTERN] Re: X310 RIO Session Initialization Failure (Error
code -63150)
On 29/01/2025 04:32, Heinz, Dominik wrote:
Okay,
So I am having trouble to interface with the X310, despite having set the
correct IP addresses for both interfaces..?
gnb@xgoss-host:~$ ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group
default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: enp77s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP
group default qlen 1000
link/ether 9c:6b:00:56:a3:a5 brd ff:ff:ff:ff:ff:ff
3: enp1s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group
default qlen 1000
link/ether f8:f2:1e:9b:f1:60 brd ff:ff:ff:ff:ff:ff
inet 192.168.30.2/24 brd 192.168.30.255 scope global noprefixroute enp1s0f0
valid_lft forever preferred_lft forever
inet6 fe80::a1a4:f18c:ce2c:bbf1/64 scope link noprefixroute
valid_lft forever preferred_lft forever
4: enp1s0f1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group
default qlen 1000
link/ether f8:f2:1e:9b:f1:61 brd ff:ff:ff:ff:ff:ff
inet 192.168.40.2/24 brd 192.168.40.255 scope global noprefixroute enp1s0f1
valid_lft forever preferred_lft forever
inet6 fe80::f167:b030:ddfa:a249/64 scope link noprefixroute
valid_lft forever preferred_lft forever
5: ogstun: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1400 qdisc fq_codel
state UP group default qlen 500
link/none
inet 10.45.0.1/16 brd 10.45.255.255 scope global ogstun
valid_lft forever preferred_lft forever
inet6 2001:db8:cafe::1/48 scope global
valid_lft forever preferred_lft forever
inet6 fe80::d4:8229:f90e:9ef8/64 scope link stable-privacy
valid_lft forever preferred_lft forever
6: wlp76s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP
group default qlen 1000
link/ether f4:46:37:30:ee:5e brd ff:ff:ff:ff:ff:ff
inet 192.168.1.146/24 brd 192.168.1.255 scope global dynamic noprefixroute
wlp76s0
valid_lft 6788sec preferred_lft 6788sec
inet6 fe80::ee0a:9d:d428:6cb4/64 scope link noprefixroute
valid_lft forever preferred_lft forever
7: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state
DOWN group default qlen 1000
link/ether 52:54:00:6d:72:20 brd ff:ff:ff:ff:ff:ff
inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0
valid_lft forever preferred_lft forever
8: docker0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state
DOWN group default
link/ether 02:42:87:6d:5c:d9 brd ff:ff:ff:ff:ff:ff
inet 172.17.0.1/16 brd 172.17.255.255 scope global docker0
valid_lft forever preferred_lft forever
9: br-add5841a3206: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue
state DOWN group default
link/ether 02:42:9c:fa:66:b5 brd ff:ff:ff:ff:ff:ff
inet 192.168.11.1/24 brd 192.168.11.255 scope global br-add5841a3206
valid_lft forever preferred_lft forever
gnb@xgoss-host:~$ uhd_find_devices
[INFO] [UHD] linux; GNU C++ version 11.4.0; Boost_107400;
UHD_4.7.0.0-0ubuntu1~jammy1
No UHD Devices Found
gnb@xgoss-host:~$ uhd_usrp_probe
[INFO] [UHD] linux; GNU C++ version 11.4.0; Boost_107400;
UHD_4.7.0.0-0ubuntu1~jammy1
Error: LookupError: KeyError: No devices found for ----->
Empty Device Address
I got the SDR working before but for some reason I can't get this working
reliably.
I assigned the IP addresses to the interfaces with the Network GUI in Ubuntu.
But I can't find the device neither via uhd_find_devices, not with
uhd_usrp_probe.
The X310 is flashed with the XG image for dual SFP+.
Do you mind guiding me step by step how to configure the IPs for the interfaces
correctly and interface with the SDR? I don't see what I am missing?
You've given your HOST PC the same addresses as the X310. Choose some other
address. Like .1 or .3
________________________________
From: Marcus D. Leech <patchvonbr...@gmail.com><mailto:patchvonbr...@gmail.com>
Sent: Monday, January 27, 2025 12:32:14 PM
To: Heinz, Dominik; Martin Braun
Cc: usrp-users@lists.ettus.com<mailto:usrp-users@lists.ettus.com>
Subject: [EXTERN] Re: [EXTERN] [USRP-users] Re: [EXTERN] Re: [EXTERN] Re: Re:
[EXTERN] Re: X310 RIO Session Initialization Failure (Error code -63150)
On 27/01/2025 05:29, Heinz, Dominik wrote:
Okay, seems like I had to manually set the IP addresses for the interfaces. Now
I can interact perfectly with the device.
Tho, I don't know how to configure it to use both Links simultaneously, like
you suggested (to do 2x200 Msps streaming).
Any advice on that would be appreciated :)
Use the second_addr argument:
https://files.ettus.com/manual/page_usrp_x3x0.html#x3x0_usage
So, assuming the XG image, your device arguments would include:
addr=192.168.30.2,second_addr=192.168.40.2
________________________________
From: Heinz, Dominik <dominik.he...@h-da.de><mailto:dominik.he...@h-da.de>
Sent: Monday, January 27, 2025 10:32:27 AM
To: Martin Braun
Cc: Marcus D. Leech;
usrp-users@lists.ettus.com<mailto:usrp-users@lists.ettus.com>
Subject: [EXTERN] [USRP-users] Re: [EXTERN] Re: [EXTERN] Re: Re: [EXTERN] Re:
X310 RIO Session Initialization Failure (Error code -63150)
When I run the image loader without the IP address parameter it seems to be
flashing the correctly.
uhd_image_loader --args="type=x300"
However, I don't see how I can configure the IP address to be able to interact
via the 10GbE links (?)
________________________________
From: Heinz, Dominik <dominik.he...@h-da.de><mailto:dominik.he...@h-da.de>
Sent: Monday, January 27, 2025 10:18:41 AM
To: Martin Braun
Cc: Marcus D. Leech;
usrp-users@lists.ettus.com<mailto:usrp-users@lists.ettus.com>
Subject: [EXTERN] [USRP-users] Re: [EXTERN] Re: Re: [EXTERN] Re: X310 RIO
Session Initialization Failure (Error code -63150)
Hello Martin,
Hello Marcus,
The X310 does not show up as a RIO device, but rather like this:
4a:00.0 Signal processing controller: National Instruments PXIe/PCIe Device
(rev ff) (prog-if ff)
!!! Unknown header type 7f
Kernel driver in use: niusrpriok
Kernel modules: niusrpriok
This seems already problematic (?)
The nisrpriorpc server seems to be running fine:
gnb@xgoss-host:~$ sudo systemctl status niusrpriorpc
● niusrpriorpc.service - LSB: National Instruments USRP RIO Service
Loaded: loaded (/etc/init.d/niusrpriorpc; generated)
Active: active (running) since Mon 2025-01-27 09:37:21 CET; 23min ago
Docs: man:systemd-sysv-generator(8)
Tasks: 4 (limit: 153252)
Memory: 98.6M
CPU: 13.872s
CGroup: /system.slice/niusrpriorpc.service
└─1631 /usr/sbin/niusrpriorpc --daemon
Jan 27 09:37:21 xgoss-host systemd[1]: Starting LSB: National Instruments USRP
RIO Service...
Jan 27 09:37:21 xgoss-host systemd[1]: Started LSB: National Instruments USRP
RIO Service.
You also mentioned that the X310 needs to be powered on before the host system.
I have of course done this - since to my knowledge hot plugging is not possible
in the case of PCIe.
Running uhd_usrp_probe as root doesn't change anything.
I am okay with trying out the 10GbE instead, but I am not able to interact with
the device that way.
I can't seem to specify an IP or load a firmware image this way. I tried:
gnb@xgoss-host:~$ uhd_image_loader --args="type=x300,addr=192.168.10.2,fpga=HG"
[INFO] [UHD] linux; GNU C++ version 11.4.0; Boost_107400;
UHD_4.7.0.0-0ubuntu1~jammy1
No applicable UHD devices found
Any idea how to proceed? Can't seem to get the device running via PCIe, and via
10GbE I can't interact with the device either.
I will provide the details in the Github issue shortly.
________________________________
From: Martin Braun <martin.br...@ettus.com><mailto:martin.br...@ettus.com>
Sent: Friday, January 24, 2025 12:19:00 PM
To: Heinz, Dominik
Cc: Marcus D. Leech;
usrp-users@lists.ettus.com<mailto:usrp-users@lists.ettus.com>
Subject: [EXTERN] Re: [USRP-users] Re: [EXTERN] Re: X310 RIO Session
Initialization Failure (Error code -63150)
Dominik,
can you provide as much info as you can here:
https://github.com/EttusResearch/uhd/issues/818?
Like Marcus said, the PCIe interface is not used a lot (except by LabView
users), so if you can use 10 GbE instead I recommend doing that (that also
allows you to do 2x200 Msps streaming, if you have two ports).
--M
On Wed, Jan 22, 2025 at 2:58 PM Heinz, Dominik
<dominik.he...@h-da.de<mailto:dominik.he...@h-da.de>> wrote:
I followed the steps in the guide you linked, - however, I still have the issue.
The uhd drivers are installed, and the niuspriorpc service is running. However,
I still the the RIO session initialization failure.
Anything else I could try? I still don't understand what is the cause for this.
________________________________
From: Marcus D. Leech <patchvonbr...@gmail.com<mailto:patchvonbr...@gmail.com>>
Sent: Tuesday, January 21, 2025 8:32:39 PM
To: usrp-users@lists.ettus.com<mailto:usrp-users@lists.ettus.com>
Subject: [EXTERN] [USRP-users] Re: X310 RIO Session Initialization Failure
(Error code -63150)
On 21/01/2025 09:26, Heinz, Dominik wrote:
I'm experiencing an initialization issue with my Ettus X310 USRP device.
My setup consists of an Ettus X310 connected through a PCIe Card using a Molex
cable to my Linux machine.
I'm running Ubuntu with kernel version 6.8.0-51-generic and have installed all
the necessary UHD packages on the system.
The X310 is properly detected when running uhd_find_devices, but attempting to
probe the device with uhd_usrp_probe results in a RIO session initialization
error.
I attached the error output below.
What is causing this RIO session initialization failure and how can it be
resolved?
gnb@xgoss-host:~/srsRAN_Project/build4ac5300/apps/gnb$ uhd_find_devices
[INFO] [UHD] linux; GNU C++ version 11.4.0; Boost_107400;
UHD_4.7.0.0-0ubuntu1~jammy1
--------------------------------------------------
-- UHD Device 0
--------------------------------------------------
Device Address:
serial:
fpga: HG
name:
product: X310
resource: RIO0
type: x300
gnb@xgoss-host:~/srsRAN_Project/build4ac5300/apps/gnb$ uhd_usrp_probe
[INFO] [UHD] linux; GNU C++ version 11.4.0; Boost_107400;
UHD_4.7.0.0-0ubuntu1~jammy1
[INFO] [X300] X300 initialization sequence...
[INFO] [X300] Connecting to niusrpriorpc at localhost:5444...
[INFO] [X300] Using LVBITX bitfile
/usr/share/uhd/images/usrp_x310_fpga_HG.lvbitx
Error: RuntimeError: x300_impl: Could not initialize RIO session. Unknown
error. (Error code -63150)
_______________________________________________
USRP-users mailing list --
usrp-users@lists.ettus.com<mailto:usrp-users@lists.ettus.com>
To unsubscribe send an email to
usrp-users-le...@lists.ettus.com<mailto:usrp-users-le...@lists.ettus.com>
The procedures for making this work are here:
https://files.ettus.com/manual/page_usrp_x3x0.html#x3x0_hw_pcie
_______________________________________________
USRP-users mailing list --
usrp-users@lists.ettus.com<mailto:usrp-users@lists.ettus.com>
To unsubscribe send an email to
usrp-users-le...@lists.ettus.com<mailto:usrp-users-le...@lists.ettus.com>
_______________________________________________
USRP-users mailing list -- usrp-users@lists.ettus.com
To unsubscribe send an email to usrp-users-le...@lists.ettus.com
