On 27/01/2025 05:29, Heinz, Dominik wrote:
Okay, seems like I had to manually set the IP addresses for the
interfaces. Now I can interact perfectly with the device.
Tho, I don't know how to configure it to use both Links
simultaneously, like you suggested (to do 2x200 Msps streaming).
Any advice on that would be appreciated :)
Use the second_addr argument:
https://files.ettus.com/manual/page_usrp_x3x0.html#x3x0_usage
So, assuming the XG image, your device arguments would include:
addr=192.168.30.2,second_addr=192.168.40.2
------------------------------------------------------------------------
*From:* Heinz, Dominik <dominik.he...@h-da.de>
*Sent:* Monday, January 27, 2025 10:32:27 AM
*To:* Martin Braun
*Cc:* Marcus D. Leech; usrp-users@lists.ettus.com
*Subject:* [EXTERN] [USRP-users] Re: [EXTERN] Re: [EXTERN] Re: Re:
[EXTERN] Re: X310 RIO Session Initialization Failure (Error code -63150)
When I run the image loader without the IP address parameter it seems
to be flashing the correctly.
uhd_image_loader --args="type=x300"
However, I don't see how I can configure the IP address to be able to
interact via the 10GbE links (?)
------------------------------------------------------------------------
*From:* Heinz, Dominik <dominik.he...@h-da.de>
*Sent:* Monday, January 27, 2025 10:18:41 AM
*To:* Martin Braun
*Cc:* Marcus D. Leech; usrp-users@lists.ettus.com
*Subject:* [EXTERN] [USRP-users] Re: [EXTERN] Re: Re: [EXTERN] Re:
X310 RIO Session Initialization Failure (Error code -63150)
Hello Martin,
Hello Marcus,
The X310 does not show up as a RIO device, but rather like this:
4a:00.0 Signal processing controller: National Instruments PXIe/PCIe
Device (rev ff) (prog-if ff)
!!! Unknown header type 7f
Kernel driver in use: niusrpriok
Kernel modules: niusrpriok
This seems already problematic (?)
The nisrpriorpc server seems to be running fine:
gnb@xgoss-host:~$ sudo systemctl status niusrpriorpc
● niusrpriorpc.service - LSB: National Instruments USRP RIO Service
Loaded: loaded (/etc/init.d/niusrpriorpc; generated)
Active: active (running) since Mon 2025-01-27 09:37:21 CET; 23min ago
Docs: man:systemd-sysv-generator(8)
Tasks: 4 (limit: 153252)
Memory: 98.6M
CPU: 13.872s
CGroup: /system.slice/niusrpriorpc.service
└─1631 /usr/sbin/niusrpriorpc --daemon
Jan 27 09:37:21 xgoss-host systemd[1]: Starting LSB: National
Instruments USRP RIO Service...
Jan 27 09:37:21 xgoss-host systemd[1]: Started LSB: National
Instruments USRP RIO Service.
You also mentioned that the X310 needs to be powered on before the
host system.
I have of course done this - since to my knowledge hot plugging is not
possible in the case of PCIe.
Running uhd_usrp_probe as root doesn't change anything.
I am okay with trying out the 10GbE instead, but I am not able to
interact with the device that way.
I can't seem to specify an IP or load a firmware image this way. I tried:
gnb@xgoss-host:~$ uhd_image_loader
--args="type=x300,addr=192.168.10.2,fpga=HG"
[INFO] [UHD] linux; GNU C++ version 11.4.0; Boost_107400;
UHD_4.7.0.0-0ubuntu1~jammy1
No applicable UHD devices found
Any idea how to proceed? Can't seem to get the device running via
PCIe, and via 10GbE I can't interact with the device either.
I will provide the details in the Github issue shortly.
------------------------------------------------------------------------
*From:* Martin Braun <martin.br...@ettus.com>
*Sent:* Friday, January 24, 2025 12:19:00 PM
*To:* Heinz, Dominik
*Cc:* Marcus D. Leech; usrp-users@lists.ettus.com
*Subject:* [EXTERN] Re: [USRP-users] Re: [EXTERN] Re: X310 RIO Session
Initialization Failure (Error code -63150)
Dominik,
can you provide as much info as you can here:
https://github.com/EttusResearch/uhd/issues/818?
Like Marcus said, the PCIe interface is not used a lot (except by
LabView users), so if you can use 10 GbE instead I recommend doing
that (that also allows you to do 2x200 Msps streaming, if you have two
ports).
--M
On Wed, Jan 22, 2025 at 2:58 PM Heinz, Dominik <dominik.he...@h-da.de>
wrote:
I followed the steps in the guide you linked, - however, I still
have the issue.
The uhd drivers are installed, and the niuspriorpc service is
running. However, I still the the RIO session initialization failure.
Anything else I could try? I still don't understand what is the
cause for this.
------------------------------------------------------------------------
*From:* Marcus D. Leech <patchvonbr...@gmail.com>
*Sent:* Tuesday, January 21, 2025 8:32:39 PM
*To:* usrp-users@lists.ettus.com
*Subject:* [EXTERN] [USRP-users] Re: X310 RIO Session
Initialization Failure (Error code -63150)
On 21/01/2025 09:26, Heinz, Dominik wrote:
I'm experiencing an initialization issue with my Ettus X310 USRP
device.
My setup consists of an Ettus X310 connected through a PCIe Card
using a Molex cable to my Linux machine.
I'm running Ubuntu with kernel version 6.8.0-51-generic and have
installed all the necessary UHD packages on the system.
The X310 is properly detected when running |uhd_find_devices|,
but attempting to probe the device with |uhd_usrp_probe| results
in a RIO session initialization error.
I attached the error output below.
What is causing this RIO session initialization failure and how
can it be resolved?
gnb@xgoss-host:~/srsRAN_Project/build4ac5300/apps/gnb$
uhd_find_devices
[INFO] [UHD] linux; GNU C++ version 11.4.0; Boost_107400;
UHD_4.7.0.0-0ubuntu1~jammy1
--------------------------------------------------
-- UHD Device 0
--------------------------------------------------
Device Address:
serial:
fpga: HG
name:
product: X310
resource: RIO0
type: x300
gnb@xgoss-host:~/srsRAN_Project/build4ac5300/apps/gnb$
uhd_usrp_probe
[INFO] [UHD] linux; GNU C++ version 11.4.0; Boost_107400;
UHD_4.7.0.0-0ubuntu1~jammy1
[INFO] [X300] X300 initialization sequence...
[INFO] [X300] Connecting to niusrpriorpc at localhost:5444...
[INFO] [X300] Using LVBITX bitfile
/usr/share/uhd/images/usrp_x310_fpga_HG.lvbitx
Error: RuntimeError: x300_impl: Could not initialize RIO session.
Unknown error. (Error code -63150)
_______________________________________________
USRP-users mailing list --usrp-users@lists.ettus.com
To unsubscribe send an email tousrp-users-le...@lists.ettus.com
The procedures for making this work are here:
https://files.ettus.com/manual/page_usrp_x3x0.html#x3x0_hw_pcie
_______________________________________________
USRP-users mailing list -- usrp-users@lists.ettus.com
To unsubscribe send an email to usrp-users-le...@lists.ettus.com
_______________________________________________
USRP-users mailing list -- usrp-users@lists.ettus.com
To unsubscribe send an email to usrp-users-le...@lists.ettus.com
