On 29/10/2024 12:53, pigatoimdeafrance...@gmail.com wrote:
Yes, both SFP+ ports are connected to the host.
Host side, the ip addresses are:
|enp3s0f0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 9000|
|inet 192.168.20.1 netmask 255.255.255.0 broadcast 0.0.0.0|
|ether 7c:c2:55:7b:35:7e txqueuelen 1000 (Ethernet)|
|RX packets 4616 bytes 432264 (432.2 KB)|
|RX errors 0 dropped 90 overruns 0 frame 0|
|TX packets 2518 bytes 1371160 (1.3 MB)|
|TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0|
|enp3s0f1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 9000|
|inet 192.168.10.1 netmask 255.255.255.0 broadcast 0.0.0.0|
|ether 7c:c2:55:7b:35:7f txqueuelen 1000 (Ethernet)|
|RX packets 1226 bytes 945608 (945.6 KB)|
|RX errors 0 dropped 198 overruns 0 frame 0|
|TX packets 15263 bytes 18973321 (18.9 MB)|
|TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0|
whereas N310 the interfaces are:
|sfp0 Link encap:Ethernet HWaddr 00:80:2F:34:A1:BD|
|inet addr:192.168.10.2 Bcast:192.168.10.255 Mask:255.255.255.0|
|UP BROADCAST RUNNING MULTICAST MTU:9000 Metric:1|
|RX packets:3403 errors:0 dropped:0 overruns:0 frame:0|
|TX packets:1079 errors:0 dropped:0 overruns:0 carrier:0|
|collisions:0 txqueuelen:1000|
|RX bytes:869430 (849.0 KiB) TX bytes:62857 (61.3 KiB)|
|sfp1 Link encap:Ethernet HWaddr 00:80:2F:34:A1:BE|
|inet addr:192.168.20.2 Bcast:192.168.20.255 Mask:255.255.255.0|
|UP BROADCAST RUNNING MULTICAST MTU:9000 Metric:1|
|RX packets:3775 errors:0 dropped:0 overruns:0 frame:0|
|TX packets:403 errors:0 dropped:0 overruns:0 carrier:0|
|collisions:0 txqueuelen:1000|
|RX bytes:338406 (330.4 KiB) TX bytes:603205 (589.0 KiB)|
Both 192.168.20.2 and 192.168.10.2 can be pinged correctly.
“udpv“ protocol was a typo of mine. The output of cmd |$sudo
firewall-cmd --list-ports| is:
|49152/udp|
In the past when this has happened, it was due to swapping the cables on
the two ports. Check that.
If that doesn't work, trying temporarily disabling your firewall entirely.
_______________________________________________
USRP-users mailing list -- usrp-users@lists.ettus.com
To unsubscribe send an email to usrp-users-le...@lists.ettus.com
