On 29/10/2024 11:42, pigatoimdeafrance...@gmail.com wrote:
Hi Marcus,
N310 can be pinged with both addresses.
I set up port 49152 and should be listed:
$sudo firewall-cmd --list-ports
49152/udpv
however, the problem still persists
_______________________________________________
USRP-users mailing list -- usrp-users@lists.ettus.com
To unsubscribe send an email to usrp-users-le...@lists.ettus.com
WHe
When you say "both ports", do you mean that you have both SFP+ ports
connected to your host? Can you confirm the IP
address configuration of your host NICs, and the addresses on the
N310? On the N310 with the default FPGA image,
that supports 1GiGe on SFP0 and 10GiGe on SFP1, the addresses are
192.168.10.2 and 192.168.20.2.
The management (RJ-45) port is DHCP enabled by default, so it will have
whatever address was assigned by your
network.
_______________________________________________
USRP-users mailing list -- usrp-users@lists.ettus.com
To unsubscribe send an email to usrp-users-le...@lists.ettus.com
