Hey Martin, Tried that as almost a first thing after the issue occurred. The command successfully runs with no error but the same issue persists, where any other command gives me the "Error: RuntimeError: B200 unknown product code: 0xe3e0" message. -- Mark ________________________________ From: Martin Braun <martin.br...@ettus.com> Sent: Friday, June 28, 2024 5:26 AM To: Mark Rosenbaum <m_ro...@mit.edu> Cc: usrp-users@lists.ettus.com <usrp-users@lists.ettus.com> Subject: Re: [USRP-users] Bricked B210 due to wiped EEPROM
Hi Mark, b2xx_fx3_utils --init-device is your friend. After you run that, you can run `usrp_burn_mb_eeprom` again to configure serial number etc. --M On Thu, Jun 27, 2024 at 8:45 PM Mark Rosenbaum <m_ro...@mit.edu<mailto:m_ro...@mit.edu>> wrote: Hi All, I was recently working on fixing an issue with my B210 and accidentally re-flashed the bootloader. In the process it seems to have fully wiped the EEPROM and now when attempting to perform any action on the device I get the following error: "Error: RuntimeError: B200 unknown product code: 0xe3e0". Is there any way to go back and re-flash the original values? I've tried to use the usrp_burn_mb_eeprom command with the recover_mb_eeprom but it still fails with the same error. Thanks, Mark _______________________________________________ USRP-users mailing list -- usrp-users@lists.ettus.com<mailto:usrp-users@lists.ettus.com> To unsubscribe send an email to usrp-users-le...@lists.ettus.com<mailto:usrp-users-le...@lists.ettus.com>
_______________________________________________ USRP-users mailing list -- usrp-users@lists.ettus.com To unsubscribe send an email to usrp-users-le...@lists.ettus.com
