these are the further results. In which now I can see that there is replay block after executing uhd_usrp_probe. I am really thankful to your help.
grcusrp@grcusrp-ThinkPad-T470:\~/uhd/fpga/usrp3/top/e31x$ uhd_image_loader --args type=e3xx,adr=192.168.10.2 --fpga-path=/home/grcusrp/uhd/fpga/usrp3/top/e31x/build/usrp_e310_sg3_fpga.bit \[INFO\] \[UHD\] linux; GNU C++ version 9.4.0; Boost_107100; UHD_4.4.0.HEAD-0-g5fac246b \[INFO\] \[MPMD\] Initializing 1 device(s) in parallel with args: mgmt_addr=192.168.10.2,type=e3xx,product=e310_sg3,serial=31370FC,name=ni-e31x-31370FC,fpga=n/a,claimed=False,addr=192.168.10.2,skip_init=1 \[INFO\] \[MPMD\] Claimed device without full initialization. \[INFO\] \[MPMD IMAGE LOADER\] Starting update. This may take a while. \[INFO\] \[MPM.PeriphManager\] Installing component \`fpga' \[INFO\] \[MPM.PeriphManager\] Installing component \`dts' \[INFO\] \[MPMD IMAGE LOADER\] Update component function succeeded. \[INFO\] \[MPM.RPCServer\] Resetting peripheral manager. \[WARNING\] \[MPM.PeriphManager\] Skipping HW/SW compatibility check! \[INFO\] \[MPM.PeriphManager\] Device serial number: 31370FC \[WARNING\] \[MPM.PeriphManager\] Found more EEPROM paths than daughterboards. Ignoring some of them. \[INFO\] \[MPMD\] Initializing 1 device(s) in parallel with args: mgmt_addr=192.168.10.2,type=e3xx,product=e310_sg3,serial=31370FC,name=ni-e31x-31370FC,fpga=n/a,claimed=False,addr=192.168.10.2,adr=192.168.10.2,find_all=1 \[WARNING\] \[MPM.PeriphManager\] Cannot run deinit(), device was never fully initialized! \[INFO\] \[MPM.PeriphManager\] init() called with device args \`adr=192.168.10.2,find_all=1,fpga=n/a,mgmt_addr=192.168.10.2,name=ni-e31x-31370FC,product=e310_sg3'. \[INFO\] \[0/Radio#0\] Performing CODEC loopback test on channel 0 ... \[INFO\] \[0/Radio#0\] CODEC loopback test passed \[INFO\] \[0/Radio#0\] Performing CODEC loopback test on channel 1 ... \[INFO\] \[0/Radio#0\] CODEC loopback test passed grcusrp@grcusrp-ThinkPad-T470:\~/uhd/fpga/usrp3/top/e31x$ uhd_usrp_probe \[INFO\] \[UHD\] linux; GNU C++ version 9.4.0; Boost_107100; UHD_4.4.0.HEAD-0-g5fac246b \[INFO\] \[MPMD\] Initializing 1 device(s) in parallel with args: mgmt_addr=192.168.10.2,type=e3xx,product=e310_sg3,serial=31370FC,name=ni-e31x-31370FC,fpga=n/a,claimed=False,addr=192.168.10.2 \[INFO\] \[MPM.PeriphManager\] init() called with device args \`fpga=n/a,mgmt_addr=192.168.10.2,name=ni-e31x-31370FC,product=e310_sg3'. \[INFO\] \[0/Radio#0\] Performing CODEC loopback test on channel 0 ... \[INFO\] \[0/Radio#0\] CODEC loopback test passed \[INFO\] \[0/Radio#0\] Performing CODEC loopback test on channel 1 ... \[INFO\] \[0/Radio#0\] CODEC loopback test passed _____________________________________________________ / | Device: E300-Series Device | _____________________________________________________ | / | | Mboard: ni-e31x-31370FC | | dboard_0_pid: 272 | | dboard_0_serial: 312CB29 | | fs_version: 20230131233832 | | mender_artifact: v4.4.0.0_e310_sg3 | | mpm_sw_version: 4.4.0.0-g5fac246b | | pid: 30675 | | product: e310_sg3 | | rev: 7 | | rpc_connection: remote | | serial: 31370FC | | type: e3xx | | MPM Version: 4.4 | | FPGA Version: 6.0 | | FPGA git hash: 5fac246.dirty | | RFNoC capable: Yes | | | | Time sources: internal, external, gpsdo | | Clock sources: internal | | Sensors: ref_locked, gps_locked, temp_fpga, temp_mb, gps_gpgga, gps_sky, gps_time, gps_tpv | _____________________________________________________ | / | | RFNoC blocks on this device: | | | | \* 0/Radio#0 | | \* 0/Replay#0 | _____________________________________________________ | / | | Static connections on this device: | | | | \* 0/SEP#0:0==>0/Replay#0:0 | | \* 0/SEP#1:0==>0/Replay#0:1 | | \* 0/Replay#0:0==>0/Radio#0:0 | | \* 0/Replay#0:1==>0/Radio#0:1 | | \* 0/Radio#0:0==>0/SEP#0:0 | | \* 0/Radio#0:1==>0/SEP#1:0 | _____________________________________________________ | / | | TX Dboard: 0/Radio#0 | | _____________________________________________________ | | / | | | TX Frontend: 0 | | | Name: E3xx | | | Antennas: TX/RX | | | Freq range: 47.000 to 6000.000 MHz | | | Gain range PGA: 0.0 to 89.8 step 0.2 dB | | | Bandwidth range: 20000000.0 to 40000000.0 step 0.0 Hz | | | Connection Type: IQ | | | Uses LO offset: No | | _____________________________________________________ | | / | | | TX Frontend: 1 | | | Name: E3xx | | | Antennas: TX/RX | | | Freq range: 47.000 to 6000.000 MHz | | | Gain range PGA: 0.0 to 89.8 step 0.2 dB | | | Bandwidth range: 20000000.0 to 40000000.0 step 0.0 Hz | | | Connection Type: IQ | | | Uses LO offset: No | _____________________________________________________ | / | | RX Dboard: 0/Radio#0 | | _____________________________________________________ | | / | | | RX Frontend: 0 | | | Name: E3xx | | | Antennas: RX2, TX/RX | | | Freq range: 70.000 to 6000.000 MHz | | | Gain range PGA: 0.0 to 76.0 step 1.0 dB | | | Bandwidth range: 20000000.0 to 40000000.0 step 0.0 Hz | | | Connection Type: IQ | | | Uses LO offset: No | | _____________________________________________________ | | / | | | RX Frontend: 1 | | | Name: E3xx | | | Antennas: RX2, TX/RX | | | Freq range: 70.000 to 6000.000 MHz | | | Gain range PGA: 0.0 to 76.0 step 1.0 dB | | | Bandwidth range: 20000000.0 to 40000000.0 step 0.0 Hz | | | Connection Type: IQ | | | Uses LO offset: No
_______________________________________________ USRP-users mailing list -- usrp-users@lists.ettus.com To unsubscribe send an email to usrp-users-le...@lists.ettus.com
