I can not ping the non-working device even, either through RJ-45 or the SFP port. To be clear, everything I am doing to network into the non-working device is through console JTAG. Before this problem started, I was able to ssh into the processing system(Embedded linux) through either RJ-45 port and the SFP ports just fine.
In general, the x410 automatically sets the SFP ports 1-4 to 192.168.10.1-4 respectively. This is something I generally rely to not only log into the device, but when I want to run UHD software. If I ever want to use the RJ-45 port, I usually have to manually set the ip address using ifconfig, but this is pretty trivial. Now, the device does not set the SFP addresses automatically, and I suspect it has something to do with the ssh service not starting. Additionally, if I use the Console JTAG port to manually set the address of the RJ-45 port, then try to ping that address from my host device, the address is not reachable.
_______________________________________________ USRP-users mailing list -- usrp-users@lists.ettus.com To unsubscribe send an email to usrp-users-le...@lists.ettus.com
