I've just tried SSH'ing into an X410 via the SFP ports and that worked. Nevertheless, I'd prefer using the 1 Gbps interface. You wrote you are unable to use the JTAG port to connect to the device. What does that mean? Can you connect to the serial port exposed by this, but you cannot login to the embedded Linux or are you completely unable to connect? If you cannot connect to the serial console then removing the power supply for some time, reconnecting and switching the X410 on again might help, too.
I don't know what is going on with this device, but if it's really a boot loop and you can at least connect to the JTAG while booting up you could try this: https://files.ettus.com/manual/page_usrp_x4xx.html#x4xx_resetting_boot_environment If that doesn't help but you have the JTAG access, you should try re-imaging the device: https://files.ettus.com/manual/page_usrp_x4xx.html#x4xx_accessing_emmc_usb Unless you have a lot of work on the device that isn't saved anywhere else, I wouldn't spend any time on restoring the file system but rather flash the device again. As a last resort if you cannot get the device back up and running, please reach out to our support team. /Martin -----Original Message----- From: Marcus D. Leech <patchvonbr...@gmail.com> Sent: Wednesday, November 15, 2023 12:15 AM To: usrp-users@lists.ettus.com Subject: [USRP-users] Re: x410 stuck in reboot On 14/11/2023 17:40, jmalo...@umass.edu wrote: > > I was eventually able to resolve the “[FAILED] Failed to start File > System Check on Root Device.” using fsck tools. > > I still am not able to ssh into the x410 however. The addresses to not > automatically change to the default values(i.e sfp0 = 192.168.10.2), > and manually changing them does not appear to work either. > > > _______________________________________________ > USRP-users mailing list -- usrp-users@lists.ettus.com To unsubscribe > send an email to usrp-users-le...@lists.ettus.com The management console of the X410 (if it's like others of its type) uses DHCP by default, and you'll have to figure out what address to use based on that. If it's like other similar devices (I don't have one in my collection yet), you cannot SSH in via the SFP ports--they are strictly for data streaming, and certainly not for mundane tasks like SSH management. _______________________________________________ USRP-users mailing list -- usrp-users@lists.ettus.com To unsubscribe send an email to usrp-users-le...@lists.ettus.com National Instruments Dresden GmbH; Geschäftsführer (Managing Directors): John Stanton McElroy, Albert Edward Percival III, Kathleen Spurck; Sitz (Registered Office): Dresden; HRB (Commercial Register No.): 22081; Registergericht (Registration Court): Dresden This email and any attachments are intended only for the person to whom this email is addressed and may contain confidential and/or privileged information. If you received this email in error, please do not disclose the contents to anyone, but notify the sender by return email and delete this email (and any attachments) from your system. _______________________________________________ USRP-users mailing list -- usrp-users@lists.ettus.com To unsubscribe send an email to usrp-users-le...@lists.ettus.com
