Thanks Marcus,
They work continuously up to not having any dample drift caused by sampling
clock offset

On Tuesday, August 15, 2023, Marcus D. Leech <patchvonbr...@gmail.com>
wrote:

> On 15/08/2023 05:43, Ali G. Dezfuli wrote:
>
>> Hi all,
>>
>> I have two transceivers A and B each one is connected by cables to a USRP
>> B200mini (TX/RX for send and RX2 for receive)
>>
>> Using GNU Radio, for each iteration, transceiver A starts to send a burst
>> of RC-filtered, BPSK-modulated PN sequence.
>> Side B waits for the burst and as soon as it gets that (by correlation),
>> detects the
>> phase ramp (because of the carrier frequency offset (CFO)) on the PN
>> symbols
>> and makes a new burst with the same phase ramp, and sends its burst back
>> to side A.
>> Then I observe the phase of the received symbols at A.
>>
>> As far as there is no sample loss/insertion, I suppose the phase
>> continuity is held and
>> should receive a constant phase on the received symbols at A whose value
>> depends
>> on the delay between A and B which is fixed.
>>
>> I observe these issues:
>> 1- in some iterations, the received phase at A is not fixed.
>> 2- in some iterations, the received phase at A is fixed but does not
>> equal other iterations.
>>
>> Would be grateful if anyone could help me with this.
>> Thanks!
>>
>> _______________________________________________
>> USRP-users mailing list -- usrp-users@lists.ettus.com
>> To unsubscribe send an email to usrp-users-le...@lists.ettus.com
>>
> You haven't noted whether the two USRPs are syncrhonized or not.
>
> Two radios that are not synchronized to a common clock will NOT have
> mutual phase-coherence over any
>   non-trivial interval.
>
> Are you running RX continuously, or starting/stopping streams?
>
>
>
> _______________________________________________
> USRP-users mailing list -- usrp-users@lists.ettus.com
> To unsubscribe send an email to usrp-users-le...@lists.ettus.com
>
_______________________________________________
USRP-users mailing list -- usrp-users@lists.ettus.com
To unsubscribe send an email to usrp-users-le...@lists.ettus.com

Reply via email to