On 10/08/2023 03:44, Bachmaier, Luca wrote:
Thanks for your quick reply.
I should’ve mentioned that I’ve already done that. At the time when
the first error occured, there was a factory image on the uSD card in
the device.
[ERROR] [UHD] An unexpected exception was caught in a task loop. The
task loop will now exit, things may not work.rpc::timeout: Timeout of
10000ms while calling RPC function 'get_log_buf'
Is there anything you can tell me about this problem? I was not able
to find anything closely related in the mailing list here.
Regards
Luca
SO, with a factory uSD image in the device, can we get back to a point
where 'uhd_usrp_probe' runs normally?
*Von:*Marcus D. Leech <patchvonbr...@gmail.com>
*Gesendet:* Dienstag, 8. August 2023 16:37
*An:* usrp-users@lists.ettus.com
*Betreff:* [USRP-users] Re: N310 uhd_image_loader: two errors
On 08/08/2023 10:29, Bachmaier, Luca wrote:
Hi all,
I’m currently building an image for the USRP N310 and while using
uhd_image_loader I ran into the following error (see below for
entire output):
[INFO] [MPM.PeriphManager] Installing component `dts'
[ERROR] [UHD] An unexpected exception was caught in a task
loop.The task loop will now exit, things may not
work.rpc::timeout: Timeout of 10000ms while calling RPC function
'get_log_buf'
After this happened, the RJ45 connection with the USRP seems to
have stopped working. Running uhd_usrp_find_devices can’t find any
devices. However I can still log in to the USRP over the Console
JTAG interface through screen. When calling “ip a” on my host
device and the USRP the Ethernet interfaces seem to be down, even
after rebooting the USRP.
When I tried executing uhd_image_loader again I received this error:
[ERROR] [MPMD IMAGE LOADER] mpmd_image_loader only
supports a single device.
Unfortunately I wasn’t able to find a lot of information about
these errors online or in this mailing list. I’d be happy to hear
any input about both of these errors.
Thank you and regards
Luca
Full ouput:
$ uhd_image_loader --args "type=n3xx,addr=192.168.10.2"
--fpga-path ./build/usrp_n310_fpga_XG.bit
[INFO] [UHD] linux; GNU C++ version 12.2.0; Boost_107400;
UHD_4.3.0.0+ds1-5
[INFO] [MPMD] Initializing 1 device(s) in parallel with args:
mgmt_addr=192.168.10.2,type=n3xx,product=n310,serial=31E9FA6,name=ni-n3xx-31E9FA6,fpga=HG,claimed=False,skip_init=1
[INFO] [MPMD] Claimed device without full initialization.
[INFO] [MPMD IMAGE LOADER] Starting update. This may take a while.
[INFO] [MPM.PeriphManager] Installing component `fpga'
[INFO] [MPM.PeriphManager] Installing component `dts'
[ERROR] [UHD] An unexpected exception was caught in a task
loop.The task loop will now exit, things may not
work.rpc::timeout: Timeout of 10000ms while calling RPC function
'get_log_buf'
[ERROR] [UHD] Exception caught in safe-call.
in ~mpmd_mboard_impl
at ./host/lib/usrp/mpmd/mpmd_mboard_impl.cpp:320
dump_logs(); _claimer_task.reset(); if (not
rpc->request_with_token<bool>("unclaim")) {
uhd::_log::log(uhd::log::warning,
"./host/lib/usrp/mpmd/mpmd_mboard_impl.cpp", 322, "MPMD",
std::this_thread::get_id()) << "Failure to ack unclaim!";; } ->
rpc::timeout: Timeout of 10000ms while calling RPC function
'get_log_buf'
Error: rpc::timeout: Timeout of 120000ms while calling RPC
function 'update_component'
_______________________________________________
USRP-users mailing list -- usrp-users@lists.ettus.com
<mailto:usrp-users@lists.ettus.com>
To unsubscribe send an email to usrp-users-le...@lists.ettus.com
<mailto:usrp-users-le...@lists.ettus.com>
Well, I guess the first thing to do is to run a factory system image
on the device and make sure that it is sane--just program
an uSD card with the factory image and run that to make sure it is sane.
_______________________________________________
USRP-users mailing list -- usrp-users@lists.ettus.com
To unsubscribe send an email to usrp-users-le...@lists.ettus.com
