I don't think that card supports 4 x 10 GbE. But suppose you used a card that does, or you used multiple 10 GbE cards to connect to all four 10 GbE ports on the X410, then you would set the args to "addr=192.168.10.2,second_addr=192.168.11.2,third_addr=192.168.12.2,fourth_addr=192.168.13.2". The streams would be automatically distributed across the four ethernet devices corresponding to those IP address subnets, giving you a total theoretical throughput of 40 Gbit/s.
Wade On Thu, Apr 6, 2023 at 8:32 AM <shikunhong12...@outlook.com> wrote: > For question 2, can I understand it like this: if I use mellanox > mcx516ccat board, mirror select x4 200 for firmware, parameters addr, > second_addr, third_addr and > > The fourth_addr is set to 192.168.10.2, so that when uhd is running, the > data stream will be automatically allocated, up to 40 GbE? > _______________________________________________ > USRP-users mailing list -- usrp-users@lists.ettus.com > To unsubscribe send an email to usrp-users-le...@lists.ettus.com >
_______________________________________________ USRP-users mailing list -- usrp-users@lists.ettus.com To unsubscribe send an email to usrp-users-le...@lists.ettus.com
