So I am on the x4_200 image and am wondering what the "correct" way to setup the transport is.
I currently have a single qsfp28 connection on the x410 to a single 100 GbE port on a mellanox card. Question #1: Looking at the description of the fpga image it describes the x4_200 as "4 x 10GbE", so should I really be configured as single qsfp28 connection on the x410 to a quad 10 GbE on host with a breakout cable? I am seeing some wonkiness in my app, which was pretty stable on the N310 and wondering if it could be due to my transport setup. I am still investigating the app, but it made me think about how the data is delivered from device to host. Question #2: With the x4_200 fpga image, is the traffic for each RF port "routed" to a single 10GbE interface? 4 RF ports, 4 10GbE connections? Any insights would be greatly appreciated :)
_______________________________________________ USRP-users mailing list -- usrp-users@lists.ettus.com To unsubscribe send an email to usrp-users-le...@lists.ettus.com
