Hi all, I'd like to provide an external 10MHz sinusoidal clock to an N320. The clock signal level is below the 10dBm max spec for this radio, however it's a bipolar sinewave (1.8Vpp, centered at 0V). I think this is somewhat common for sinewave oscillators. The N320 documentation isn't clear on whether this is acceptable, or whether the external clock must have a DC bias even if its sinewave. Looking at the schematic, the clock feeds into a TI CDC3RL02, which seems to indicate the sinusoid must have DC offset applied to keep it above ~0.3V. Can somebody please confirm?
Thanks! -- David Raeman Synoptic Engineering
_______________________________________________ USRP-users mailing list -- usrp-users@lists.ettus.com To unsubscribe send an email to usrp-users-le...@lists.ettus.com
