Thanks for the reply, I'll go ahead and flash the whole SD.
Lorenzo ________________________________ From: Rob Kossler <rkoss...@nd.edu> Sent: Monday, August 23, 2021 6:51 PM To: Minutolo, Lorenzo <minut...@caltech.edu> Cc: usrp-users@lists.ettus.com <usrp-users@lists.ettus.com> Subject: Re: [USRP-users] Mender update error Hi Lorenzo, Do you have the ability to remove the SD card and write it directly? If so, I would suggest doing this (rather than mender) and using the bmaptool method. This is way faster than mender. I do recall having issues updating with mender but I'm not 100% certain if the issues were exactly the same as yours. It could be that upgrading from 3.x to 4.x with mender is broken. In the end, I lost patience with mender and used the other method. Rob On Mon, Aug 23, 2021 at 7:32 PM Minutolo, Lorenzo <minut...@caltech.edu<mailto:minut...@caltech.edu>> wrote: Hi, I'm trying to update the filesystem on my N321 to use UHD 4.1. I'm running into some troubles. After installing UHD 4.1, downloading and copying the image, logging in into the N321: root@ni-n3xx-xxxxxxx:~# mender install usrp_n3xx_fs.mender INFO[0000] Loaded configuration file: /var/lib/mender/mender.conf INFO[0000] Loaded configuration file: /etc/mender/mender.conf INFO[0000] No dual rootfs configuration present INFO[0000] Start updating from local image file: [usrp_n3xx_fs.mender] Installing Artifact of size 395053568... INFO[0000] No public key was provided for authenticating the artifact INFO[0000] Update Module path "/usr/share/mender/modules/v3" could not be opened (open /usr/share/mender/modules/v3: no such file or directory). Update modules will not be available ERRO[0000] Reading headers failed: installer: failed to read Artifact: Artifact Payload type 'rootfs-image' is not supported by this Mender Client. Ensure that the Mender Client is fully integrated and that the RootfsPartA/B configuration variables are set correctly in 'mender.conf' ERRO[0000] installer: failed to read Artifact: Artifact Payload type 'rootfs-image' is not supported by this Mender Client. Ensure that the Mender Client is fully integrated and that the RootfsPartA/B configuration variables are set correctly in 'mender.conf' I also tried root@ni-n3xx-xxxxxxx:~# mender install usrp_n3xx_fs.mender --force with the same result. I did not touch any configuration file since we got the N321. How do I update the filesystem? Thanks, Lorenzo _______________________________________________ USRP-users mailing list -- usrp-users@lists.ettus.com<mailto:usrp-users@lists.ettus.com> To unsubscribe send an email to usrp-users-le...@lists.ettus.com<mailto:usrp-users-le...@lists.ettus.com>
_______________________________________________ USRP-users mailing list -- usrp-users@lists.ettus.com To unsubscribe send an email to usrp-users-le...@lists.ettus.com
