Hi Lorenzo, Do you have the ability to remove the SD card and write it directly? If so, I would suggest doing this (rather than mender) and using the bmaptool method. This is way faster than mender. I do recall having issues updating with mender but I'm not 100% certain if the issues were exactly the same as yours. It could be that upgrading from 3.x to 4.x with mender is broken. In the end, I lost patience with mender and used the other method. Rob
On Mon, Aug 23, 2021 at 7:32 PM Minutolo, Lorenzo <minut...@caltech.edu> wrote: > Hi, > I'm trying to update the filesystem on my N321 to use UHD 4.1. I'm > running into some troubles. > > After installing UHD 4.1, downloading and copying the image, logging in > into the N321: > > root@ni-n3xx-xxxxxxx:~# mender install usrp_n3xx_fs.menderINFO[0000] Loaded > configuration file: /var/lib/mender/mender.conf INFO[0000] Loaded > configuration file: /etc/mender/mender.conf INFO[0000] No dual rootfs > configuration present INFO[0000] Start updating from local image > file: [usrp_n3xx_fs.mender] > Installing Artifact of size 395053568...INFO[0000] No public key was provided > for authenticating the artifact INFO[0000] Update Module path > "/usr/share/mender/modules/v3" could not be opened (open > /usr/share/mender/modules/v3: no such file or directory). Update modules will > not be available ERRO[0000] Reading headers failed: installer: failed to read > Artifact: Artifact Payload type 'rootfs-image' is not supported by this > Mender Client. Ensure that the Mender Client is fully integrated and that the > RootfsPartA/B configuration variables are set correctly in 'mender.conf' > ERRO[0000] installer: failed to read Artifact: Artifact Payload type > 'rootfs-image' is not supported by this Mender Client. Ensure that the Mender > Client is fully integrated and that the RootfsPartA/B configuration variables > are set correctly in 'mender.conf' > > I also tried > > root@ni-n3xx-xxxxxxx:~# mender install usrp_n3xx_fs.mender --force > > with the same result. I did not touch any configuration file since we got the > N321. > How do I update the filesystem? > > Thanks, > Lorenzo > > > _______________________________________________ > USRP-users mailing list -- usrp-users@lists.ettus.com > To unsubscribe send an email to usrp-users-le...@lists.ettus.com >
_______________________________________________ USRP-users mailing list -- usrp-users@lists.ettus.com To unsubscribe send an email to usrp-users-le...@lists.ettus.com
