I'm using primarily FS adapters, cables (single and multi mode), and fiber connectors (to allow multiplexing lanes). The adapters I bought were "generic" and had to be tweaked using an FS BOX to be fully compatible with Intel or Mellanox NICs. This tweaking seems to have helped a lot with the 100 Gb interface (E810); the 10 Gb interfaces do not show much benefit to be manufacturer specific -- though I'm sure it doesn't hurt! I have not tried a multi-mode to single mode splitter / joiner, but I'd suppose they do exist & if anybody here has had experience that would be useful to hear about! I hope this is useful! - MLD
On Tue, Jun 22, 2021 at 10:05 AM Vladica Sark <vladicas...@gmail.com> wrote: > Hi Michael, > > Thanks for the answer. For now for the data I am using DAC cables, but > we would need larger distances, i.e. 50+ meters, and for this I would > need fibers for both WR and data. > > Is there also some optical multiplexer for these wavelengths, in order > to use a simplex fiber, for both WR and data? > > BR, > Vladica > > On 22.06.21 15:41, Michael Dickens wrote: > > Hi Vladica - I've tested a variety of fiber adapters and cables with > > no issues (e.g., ZyXEL, FS, Axcen). The primary keys are to make sure > > the various related parameters match up between the adapters and > > cables and devices. For example: If the adapter is 1490/1310, then you > > want to make sure the cable is for the same wavelengths. Same for the > > fiber polish and other parameters (single / dual fiber ; . Some are > > easier than others, none of this is too difficult luckily! > > > > For short distances, a DAC cable will work for all of the N320/N321 > > SFP interfaces. > > > > At the moment, WR support is being fixed for UHD 3.14.0.0 to current. > > If you -require- WR support -right now- you can use UHD 3.13.1.0 while > > we're working out how to fix WR for newer UHD. We expect the fix to be > > available to customers sometime in mid/late-July (2021); once the fix > > is determined and verified we will commit it to the various branches > > of the UHD repository, and it will be available in UHD -after- the > > forthcoming 4.1 release. It will be available in the public UHD > > repository for folks to use to patch UHD between releases. > > > > I hope this is useful! - MLD > > > > > > On Tue, Jun 22, 2021 at 6:19 AM Vladica Sark <vladicas...@gmail.com > > <mailto:vladicas...@gmail.com>> wrote: > > > > Dear all, > > > > I would like to use N321 with WRS 3/18 which uses optical cables. I > > would like to use also for the 10 Gbit SFP1 optical SFP+ transceiver. > > Do you have some recommended optical SFP+ adapters, duplex and, > > preferably, simplex? > > The idea is to use a duplex monomode fiber, one fiber for the 10 Gbit > > data and one fiber for WRS synchronization. > > They would be connected to 10 Gbit switch or QNAP Thunderbolt to SFP+ > > adapter, so they do not have to be Intel. > > > > > > Best regards, > > > > Vladica > > > > _______________________________________________ > > USRP-users mailing list -- usrp-users@lists.ettus.com > > <mailto:usrp-users@lists.ettus.com> > > To unsubscribe send an email to usrp-users-le...@lists.ettus.com > > <mailto:usrp-users-le...@lists.ettus.com> > > >
_______________________________________________ USRP-users mailing list -- usrp-users@lists.ettus.com To unsubscribe send an email to usrp-users-le...@lists.ettus.com