sure, 1. I went through the device recovery because of the issue I am currently having. However, I noticed this issue fro the first time after using vivado ILA, I was programming the device using the hardware manager, debugging, making changes to the custom rfnoc block and creating images. When I finished using vivado for debugging and testing, I wanted to load the image using the python script uhd_image_loader but I noticed the device initialization issue, then I went through the device recovery process which did not work.
2. I can load a custom image or the default image via Vivado, connect rfnoc blocks, get the right information and display data with no issues. Also, the uhd_usrp_probe is working as shown below. But I can not restart the device because the image is not written EEPROM. If I do, UHD does not find any device, I have to use vivado to load images for now. ``` [INFO] [UHD] linux; GNU C++ version 9.3.0; Boost_107100; UHD_4.0.0.0-50-ge520e3ff [INFO] [X300] X300 initialization sequence... [INFO] [X300] Maximum frame size: 8000 bytes. [INFO] [GPS] Found an internal GPSDO: LC_XO, Firmware Rev 0.929a [INFO] [X300] Radio 1x clock: 200 MHz _____________________________________________________ / | Device: X-Series Device | _____________________________________________________ | / | | Mboard: X310 | | revision: 11 | | revision_compat: 7 | | product: 30818 | | mac-addr0: 00:80:2f:22:ff:b4 | | mac-addr1: 00:80:2f:22:ff:b5 | | gateway: 192.168.10.1 | | ip-addr0: 192.168.10.2 | | subnet0: 255.255.255.0 | | ip-addr1: 192.168.20.2 | | subnet1: 255.255.255.0 | | ip-addr2: 192.168.30.2 | | subnet2: 255.255.255.0 | | ip-addr3: 192.168.40.2 | | subnet3: 255.255.255.0 | | serial: 3176C83 | | FW Version: 6.0 | | FPGA Version: 38.0 | | FPGA git hash: e520e3f-dirty | | | | Time sources: internal, external, gpsdo | | Clock sources: internal, external, gpsdo | | Sensors: gps_servo, gps_gprmc, gps_time, gps_gpgga, gps_locked, ref_locked | _____________________________________________________ | / | | RFNoC blocks on this device: | | | | * 0/DDC#0 | | * 0/DDC#1 | | * 0/DUC#0 | | * 0/DUC#1 | | * 0/FFT#0 | | * 0/FFT#1 | | * 0/Radio#0 | | * 0/Radio#1 | _____________________________________________________ | / | | Static connections on this device: | | | | * 0/SEP#0:0==>0/DUC#0:0 | | * 0/DUC#0:0==>0/Radio#0:0 | | * 0/Radio#0:0==>0/DDC#0:0 | | * 0/DDC#0:0==>0/SEP#0:0 | | * 0/Radio#0:1==>0/DDC#0:1 | | * 0/DDC#0:1==>0/SEP#1:0 | | * 0/SEP#2:0==>0/DUC#1:0 | | * 0/DUC#1:0==>0/Radio#1:0 | | * 0/Radio#1:0==>0/DDC#1:0 | | * 0/DDC#1:0==>0/SEP#2:0 | | * 0/Radio#1:1==>0/DDC#1:1 | | * 0/DDC#1:1==>0/SEP#3:0 | | * 0/SEP#4:0==>0/FFT#0:0 | | * 0/FFT#0:0==>0/SEP#4:0 | | * 0/SEP#5:0==>0/FFT#1:0 | | * 0/FFT#1:0==>0/SEP#5:0 | _____________________________________________________ | / | | TX Dboard: dboard | | ID: UBX-160 v2 (0x007d) | | Serial: 315EA14 | | _____________________________________________________ | | / | | | TX Frontend: 0 | | | Name: UBX TX | | | Antennas: TX/RX, CAL | | | Sensors: lo_locked | | | Freq range: 10.000 to 6000.000 MHz | | | Gain range PGA0: 0.0 to 31.5 step 0.5 dB | | | Bandwidth range: 160000000.0 to 160000000.0 step 0.0 Hz | | | Connection Type: QI | | | Uses LO offset: No | _____________________________________________________ | / | | RX Dboard: dboard | | ID: UBX-160 v2 (0x007e) | | Serial: 315EA14 | | _____________________________________________________ | | / | | | RX Frontend: 0 | | | Name: UBX RX | | | Antennas: TX/RX, RX2, CAL | | | Sensors: lo_locked | | | Freq range: 10.000 to 6000.000 MHz | | | Gain range PGA0: 0.0 to 31.5 step 0.5 dB | | | Bandwidth range: 160000000.0 to 160000000.0 step 0.0 Hz | | | Connection Type: IQ | | | Uses LO offset: No | _____________________________________________________ | / | | TX Dboard: dboard | | ID: UBX-160 v2 (0x007d) | | Serial: 3158364 | | _____________________________________________________ | | / | | | TX Frontend: 0 | | | Name: UBX TX | | | Antennas: TX/RX, CAL | | | Sensors: lo_locked | | | Freq range: 10.000 to 6000.000 MHz | | | Gain range PGA0: 0.0 to 31.5 step 0.5 dB | | | Bandwidth range: 160000000.0 to 160000000.0 step 0.0 Hz | | | Connection Type: QI | | | Uses LO offset: No | _____________________________________________________ | / | | RX Dboard: dboard | | ID: UBX-160 v2 (0x007e) | | Serial: 3158364 | | _____________________________________________________ | | / | | | RX Frontend: 0 | | | Name: UBX RX | | | Antennas: TX/RX, RX2, CAL | | | Sensors: lo_locked | | | Freq range: 10.000 to 6000.000 MHz | | | Gain range PGA0: 0.0 to 31.5 step 0.5 dB | | | Bandwidth range: 160000000.0 to 160000000.0 step 0.0 Hz | | | Connection Type: IQ | | | Uses LO offset: No THANKS. ```
_______________________________________________ USRP-users mailing list -- usrp-users@lists.ettus.com To unsubscribe send an email to usrp-users-le...@lists.ettus.com
