Hi Tuan,
We use OAI for the LTE and it has no PHY implementation on the FPGA. Which means that all the processing is done on the processing host with a general purpose CPU. In the wifi case the story is different. So there is no common PHY/MAC layer. Best, Samie ________________________________ From: Tuan Hoang Dinh <tuanmc...@gmail.com> Sent: Monday, March 22, 2021 11:34:38 AM To: Seyed Samie Mostafavi Cc: Marcus Müller; usrp-users@lists.ettus.com Subject: Re: [USRP-users] Re: USRP E320 Dear Samie, Good to know you are working on PHY/MAC layer of OFDM signal like LTE and wifi on the USRP. I'm also want to deploy the PHY layer of LTE on USRP but trying to use RFNoC. I got a little bit confused about the PHY layer of WARP project targets on Wifi, 802.11 standard rather than LTE. Could you tell me can I use the same PHY layer from WARP to process the LTE signal? Because some different points between OFDMA and OFDM like cyclic prefix length, FFT length.... Thanks for your help. Regards, Tuan Vào Th 2, 22 thg 3, 2021 vào lúc 19:25 Seyed Samie Mostafavi <ss...@kth.se<mailto:ss...@kth.se>> đã viết: Dear Marcus, Thanks for your answer. Of course it is overkill but we are aware of that. We chose E320 because MangoComm 802.11 MAC/PHY design (successor of Warp project) supports this device and we aim to be able to run 802.11 and LTE/5G with the same SDR. Does that make sense? Best, Samie ________________________________ From: Marcus Müller <marcus.muel...@ettus.com<mailto:marcus.muel...@ettus.com>> Sent: Saturday, March 20, 2021 8:59:44 PM To: usrp-users@lists.ettus.com<mailto:usrp-users@lists.ettus.com> Subject: [USRP-users] Re: USRP E320 Hi Seyed, the E320 is probably not the device you want: While you attach B210 and X310 to a powerful PC, which would then run OAI on the samples gotten from the USRP, the real strength of the E320 is being an embedded system, especially for people who want to develop FPGA logic and embedded software to run on the Zynq *inside* the E320. As far as I can tell, OAI is far far *far* too CPU-hungry to run it on the 800 MHz dual-core ARM inside the E320. You can indeed also use the SFP+ to stream samples to a PC, but then just be buying a pretty expensive to the B210 with no added benefits. Best regards, Marcus DISCLAIMER: Any attached Code is provided As Is. It has not been tested or validated as a product, for use in a deployed application or system, or for use in hazardous environments. You assume all risks for use of the Code. Use of the Code is subject to terms of the licenses to the UHD or RFNoC code with which the Code is used. Standard licenses to UHD and RFNoC can be found at https://www.ettus.com/sdr-software/licenses/. NI will only perform services based on its understanding and condition that the goods or services (i) are not for the use in the production or development of any item produced, purchased, or ordered by any entity with a footnote 1 designation in the license requirement column of Supplement No. 4 to Part 744, U.S. Export Administration Regulations and (ii) such a company is not a party to the transaction. If our understanding is incorrect, please notify us immediately because a specific authorization may be required from the U.S. Commerce Department before the transaction may proceed further. On 12.03.21 15:57, Seyed Samie Mostafavi wrote: > Hi everyone, > > We are starting a project and we want to buy a batch of E320s and our goal is > to run > Openaireinterface 5G on them. > These cellular communication softwares like Openaireinterface and srsLTE they > recommend > USRP devices such as B210 or X310 and not E320. I wanted to ask if anyone has > tried E320 > with srsLTE or OAI or not. > I guess since OAI works with UHD driver and the RF chip is AD9361 like B210, > there > should be no difference. However I am not sure. > Do you see any major difference in the drivers or capabilities of E320 and > B210 or X310 > such that it could become a roadblock for us? > > Best, > Samie > > ------------------------------------------------------------------------------------------ > Kth Logo > > Seyed Samie Mostafavi > Doctoral Student > KTH > /School of electrical engineering and computer science (EECS)/ > /Department of information systems and engineering (ISE)/ > Malvinas väg 10, 100 44 Stockholm > ss...@kth.se<mailto:ss...@kth.se> > > > _______________________________________________ > USRP-users mailing list -- > usrp-users@lists.ettus.com<mailto:usrp-users@lists.ettus.com> > To unsubscribe send an email to > usrp-users-le...@lists.ettus.com<mailto:usrp-users-le...@lists.ettus.com> _______________________________________________ USRP-users mailing list -- usrp-users@lists.ettus.com<mailto:usrp-users@lists.ettus.com> To unsubscribe send an email to usrp-users-le...@lists.ettus.com<mailto:usrp-users-le...@lists.ettus.com> _______________________________________________ USRP-users mailing list -- usrp-users@lists.ettus.com<mailto:usrp-users@lists.ettus.com> To unsubscribe send an email to usrp-users-le...@lists.ettus.com<mailto:usrp-users-le...@lists.ettus.com>
_______________________________________________ USRP-users mailing list -- usrp-users@lists.ettus.com To unsubscribe send an email to usrp-users-le...@lists.ettus.com
