Thanks Jim, That fixed it, would never have found that one!
Looks like Ettus need to fix this bug in rfnoc_image_builder for future releases. Mark From: Jim Palladino <j...@gardettoengineering.com> Sent: 09 February 2021 14:02 To: 'Wade Fife' <wade.f...@ettus.com>; Mark D <md...@hmgcc.gov.uk> Cc: 'usrp-users@lists.ettus.com' <usrp-users@lists.ettus.com> Subject: Re: [USRP-users] Opening Vivado GUI during FPGA image build It's been a while since I did this, but I had issues bringing up the gui as well. Here is a copy/paste of some notes I wrote for myself: * Edit the file "$PREFIX/bin/rfnoc_image_builder". * Find the line "gui=args.GUI" and change it to "GUI=args.GUI" and save it. * Next, edit "$PREFIX/../src/uhd/fpga/usrp3/tools/script/setupenv_base.sh" to make sure it properly reflects your Vivado installation path. Once I replaced "gui" with "GUI", the -g option worked fine with rfnoc_image_builder. The last note was something I had to change so my Vivado path was set correctly. Hope this helps, Jim ________________________________ ________________________________ This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager.
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
