I'm using UHD 4.0 and building an FPGA for the E320 USRP. I'm trying to follow the guide for debugging FPGA images on the Ettus website AN-121.
I'm using the rfnoc_image_builder command to build the image, and have added the -g option to open the GUI during the build process: udd_image_builder -7 e320_my_fpga.yml -t E320_1G -g However the build runs to completion without stopping to open up Vivado. uhd_image_builder -h shows that the option of -g or -GUI is listed as opening the Vivado GUI during the build. I've tried both -g and -GUI and neither had any effect. Any ideas? AN-121 is a few years old, is the -g option still supported by uhd_image_builder? Thanks, Mark ________________________________ This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager.
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
