Hi Ramez, I'd like to recommend a thorough viewing of the excellent RFNoC 4 Workshop video that Jonathon Pendlum and Neel Pandeya from Ettus Research put together for GRCon 2020, which is available on YouTube at https://www.youtube.com/watch?v=M9ntwQie9vs. This should walk you through the process of creating a new out-of-tree RFNoC 4 module and adding support for it to GNU Radio and your USRP device.
Best regards, Aaron On Thu, Feb 4, 2021 at 12:15 PM Askar, Ramez via USRP-users <usrp-users@lists.ettus.com> wrote: > > Dear Sir or Madam, > > > > I would like to use one of the available FPGA blocks from Ettus – such as FIR > filter -- to customize my FPGA image, and add the corresponding control > driver for C++ application and Gnuradio. However, after creating newmod with > rfnocmodtool, I have tried to add fir filter block, the tool is not aware > about the existing blocks. Instead, the rfnocmodtool has created a module > from scratch called FIR. In other words, it did not import the FIR module > that is offered by Ettus team. Is there any other way of doing this? How can > add a OOT RFNoC FIR control module to gnuradio? > > > > Best regards / Mit freundlichen Grüßen > > -- > Askar, Ramez, M.Sc. > Research Associate / Project Manager / Delegate > > Wireless Communications and Networks > Fraunhofer Institute for Telecommunications, Heinrich Hertz Institute, HHI > Einsteinufer 37, 10587 Berlin, Germany > +49 (0)30 31002-628 > ramez.as...@hhi.fraunhofer.de > www.hhi.fraunhofer.de > > > > _______________________________________________ > USRP-users mailing list > USRP-users@lists.ettus.com > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com _______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
