Hi Ben,

Try setting your NIC's MTU to 9000.

Jonathon

On Mon, Nov 2, 2020 at 6:55 AM Robert Wilson via USRP-users <
usrp-users@lists.ettus.com> wrote:

> Hello,
>
> OS: Linux Ubuntu 20.04.1 LTS
> GRC: 3.8
> UHD: 4.0
> USRP:X310 (HG)
>
> I have been looking at RFNoC only for a few weeks. I have followed the
> RFNoC Workshop 4 tutorial and successfully built my own custom gain block
> as well as implemented and FFT from existing blocks using the "Getting
> Started with RFNoC" document online.
>
> I am now attempting to get Fosphor up and running on my X310 to further
> understand bitstream generation from YAML files. At one point I believe
> there was an example bitstream that had the correct Fosphor configuration I
> don't see it in the build of UHD I have.
>
> I've attached my .yml file and a copy of my GRC flow graph.
> Below is the error message I'm receiving.
>
> [INFO] [UHD] linux; GNU C++ version 9.3.0; Boost_107100;
> UHD_4.0.0.0-1-gcf570707
> [INFO] [X300] X300 initialization sequence...
> [INFO] [X300] Maximum frame size: 1472 bytes.
> [INFO] [GPS] No GPSDO found
> [INFO] [X300] Radio 1x clock: 200 MHz
> [WARNING] [RFNOC::BLOCK_FACTORY] Could not find block with Noc-ID
> 0xfd7d809a, 0xffff
> [WARNING] [0/Radio#0] Setting RX IQ Balance is not possible on this device.
> gr::log :DEBUG: rfnoc_rx_streamer0 - Committing graph...
> [WARNING] [0/Radio#0] Attempting to set tick rate to 0. Skipping.
> gr::log :DEBUG: rfnoc_rx_streamer1 - Committing graph...
> gr::log :DEBUG: rfnoc_rx_streamer1 - Sending start stream command...
> gr::log :DEBUG: rfnoc_rx_streamer0 - Sending start stream command...
>
> >>> Done (return code -11)
>
> More resources of this type of development would be welcome as well.
>
> Many Thanks,
> Ben Wilson
>
>
> _______________________________________________
> USRP-users mailing list
> USRP-users@lists.ettus.com
> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com

Reply via email to