Just to emphasize, the Network Mode for the E310 was never really encouraged. The performance is poor due to hardware architecture issues. The E310 was only ever intended to be used as a stand-alone embedded radio platform, and not like a “connect to a beefy computer” USRP like the N and X and B series.
Sent from my iPhone > On Feb 24, 2020, at 2:27 PM, Simon G4ELI via USRP-users > <usrp-users@lists.ettus.com> wrote: > > > Hi Nate, > > Sorry, using GNU Radio is not an option, the aim is to connect to the E310 > via a network and stream direct. As this isn’t possible with 3.15 LTS I’ll > let the user know, thanks. > > Simon Brown, G4ELI > https://www.sdr-radio.com > > From: Nate Temple <nate.tem...@ettus.com> > Sent: 24 February 2020 19:26 > To: si...@sdr-radio.com > Cc: usrp-users@lists.ettus.com > Subject: Re: [USRP-users] E310, 3.15 LTS, Windows > > Hi Simon, > > No, the USB cable will only provide serial access. > > You could use GNU Radio to stream samples via ZMQ/TCP/UDP sockets. You could > also use pure C++/UHD API to stream via a UDP interface such as with the > example program rx_samples_to_udp. > > Regards, > Nate Temple > > On Mon, Feb 24, 2020 at 11:19 AM <si...@sdr-radio.com> wrote: > Thanks, > > Would the E310 work with the USB cable? > > Simon Brown, G4ELI > https://www.sdr-radio.com > > From: Nate Temple <nate.tem...@ettus.com> > Sent: 24 February 2020 19:11 > To: si...@sdr-radio.com > Cc: usrp-users@lists.ettus.com > Subject: Re: [USRP-users] E310, 3.15 LTS, Windows > > Hi Simon, > > The E310 network mode was removed from UHD with the switch to the MPM based > file systems. If you need to use the network mode, you should use an older > version of UHD. > > Regards, > Nate Temple > > On Mon, Feb 24, 2020 at 11:05 AM Simon G4ELI via USRP-users > <usrp-users@lists.ettus.com> wrote: > Hi All, > > A user cannot ‘see’ his E310 using 3.15 LTS compiled from source by me. The > E310 is connected by Ethernet GigE. > > I’m wondering if there’s something special needed or if there’s a magic > option I should enable in the source – the ENABLE_E300 option is checked, all > looks good to me. > > There is a second person who will soon be testing just in case it’s finger > trouble. > > Simon Brown, G4ELI > https://www.sdr-radio.com > > _______________________________________________ > USRP-users mailing list > USRP-users@lists.ettus.com > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com > _______________________________________________ > USRP-users mailing list > USRP-users@lists.ettus.com > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
