Hi Simon, No, the USB cable will only provide serial access.
You could use GNU Radio to stream samples via ZMQ/TCP/UDP sockets. You could also use pure C++/UHD API to stream via a UDP interface such as with the example program rx_samples_to_udp. Regards, Nate Temple On Mon, Feb 24, 2020 at 11:19 AM <si...@sdr-radio.com> wrote: > Thanks, > > > > Would the E310 work with the USB cable? > > > > Simon Brown, G4ELI > > https://www.sdr-radio.com > > > > *From:* Nate Temple <nate.tem...@ettus.com> > *Sent:* 24 February 2020 19:11 > *To:* si...@sdr-radio.com > *Cc:* usrp-users@lists.ettus.com > *Subject:* Re: [USRP-users] E310, 3.15 LTS, Windows > > > > Hi Simon, > > The E310 network mode was removed from UHD with the switch to the MPM > based file systems. If you need to use the network mode, you should use an > older version of UHD. > > Regards, > Nate Temple > > > > On Mon, Feb 24, 2020 at 11:05 AM Simon G4ELI via USRP-users < > usrp-users@lists.ettus.com> wrote: > > Hi All, > > > > A user cannot ‘see’ his E310 using 3.15 LTS compiled from source by me. > The E310 is connected by Ethernet GigE. > > > > I’m wondering if there’s something special needed or if there’s a magic > option I should enable in the source – the ENABLE_E300 option is checked, > all looks good to me. > > > > There is a second person who will soon be testing just in case it’s finger > trouble. > > > > Simon Brown, G4ELI > > https://www.sdr-radio.com > > > > _______________________________________________ > USRP-users mailing list > USRP-users@lists.ettus.com > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com > >
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
