Hi, I just successfully built an N310 rfnoc XG image (build rpt attached) with some custom blocks using fpga-src version v3.15.0.0, but I can't load the image successfully on the device. Below you will find four consecutive commands (highlighted in yellow) where I do the following:
1. uhd_image_loader to load my custom image (results show "clock synchronizer offset" error) 2. uhd_usrp_probe (results show "'NoneType' object has no attribute 'get'" error) 3. uhd_image_loader to load default XG image (no errors) 4. uhd_usrp_probe (no errors) I have tried multiple times but I am getting the same results each time. I have tried rebooting the N310, but still the same results. Any suggestions? Rob $ uhd_image_loader --args="type=n3xx,addr=192.168.64.2" --fpga-path=usrp_n310_fpga_RFNOC_XG.bit [INFO] [UHD] linux; GNU C++ version 7.4.0; Boost_106501; UHD_3.15.0.HEAD-0-gaea0e2de [INFO] [MPMD] Initializing 1 device(s) in parallel with args: mgmt_addr=192.168.64.2,type=n3xx,product=n310,serial=318F043,claimed=False,skip_init=1 [INFO] [MPMD] Claimed device without full initialization. [WARNING] [MPMD IMAGE LOADER] RuntimeError: Component file does not exist: /home/irisheyes1/uhd_nd/fpga_images/n310/v3.15.0.0/20200131_ddc-duc-txarb-radarfilter3-fifo/build/usrp_n310_fpga_RFNOC_XG.dts [INFO] [MPMD IMAGE LOADER] Starting update. This may take a while. [INFO] [MPM.PeriphManager] Updating component `fpga' [INFO] [MPM.RPCServer] Resetting peripheral manager. [INFO] [MPM.PeriphManager] Device serial number: 318F043 [INFO] [MPM.PeriphManager] Initialized 2 daughterboard(s). [INFO] [MPM.PeriphManager] init() called with device args `time_source=internal,clock_source=internal'. [ERROR] [MPM.Magnesium-0.init] Clock synchronizer measured an offset of 132.5 ps! [INFO] [MPMD IMAGE LOADER] Update component function succeeded. [WARNING] [MPM.PeriphManager] Failed to initialize device on boot: Clock synchronizer measured an offset of 132.5 ps! $ uhd_usrp_probe --args="addr=192.168.64.2" [INFO] [UHD] linux; GNU C++ version 7.4.0; Boost_106501; UHD_3.15.0.HEAD-0-gaea0e2de [INFO] [MPMD] Initializing 1 device(s) in parallel with args: mgmt_addr=192.168.64.2,type=n3xx,product=n310,serial=318F043,claimed=False,addr=192.168.64.2 [ERROR] [RPC] 'NoneType' object has no attribute 'get' [INFO] [MPM.PeriphManager] init() called with device args `time_source=internal,clock_source=internal,product=n310,mgmt_addr=192.168.64.2'. [ERROR] [MPM.RPCServer] init() failed with error: 'NoneType' object has no attribute 'get' Error: RuntimeError: Error during RPC call to `init'. Error message: 'NoneType' object has no attribute 'get' $ uhd_image_loader --args="type=n3xx,addr=192.168.64.2,fpga=XG" [INFO] [UHD] linux; GNU C++ version 7.4.0; Boost_106501; UHD_3.15.0.HEAD-0-gaea0e2de [INFO] [MPMD] Initializing 1 device(s) in parallel with args: mgmt_addr=192.168.64.2,type=n3xx,product=n310,serial=318F043,claimed=False,skip_init=1 [INFO] [MPMD] Claimed device without full initialization. [INFO] [MPMD IMAGE LOADER] Starting update. This may take a while. [INFO] [MPM.PeriphManager] Updating component `fpga' [INFO] [MPM.PeriphManager] Updating component `dts' [INFO] [MPM.RPCServer] Resetting peripheral manager. [INFO] [MPM.PeriphManager] Device serial number: 318F043 [INFO] [MPM.PeriphManager] Initialized 2 daughterboard(s). [INFO] [MPM.PeriphManager] init() called with device args `clock_source=internal,time_source=internal'. [INFO] [MPMD IMAGE LOADER] Update component function succeeded. $ uhd_usrp_probe --args="addr=192.168.64.2" [INFO] [UHD] linux; GNU C++ version 7.4.0; Boost_106501; UHD_3.15.0.HEAD-0-gaea0e2de [INFO] [MPMD] Initializing 1 device(s) in parallel with args: mgmt_addr=192.168.64.2,type=n3xx,product=n310,serial=318F043,claimed=False,addr=192.168.64.2 [INFO] [MPM.PeriphManager] init() called with device args `time_source=internal,clock_source=internal,product=n310,mgmt_addr=192.168.64.2'. [INFO] [0/Replay_0] Initializing block control (NOC ID: 0x4E91A00000000004) [INFO] [0/Radio_0] Initializing block control (NOC ID: 0x12AD100000011312) [INFO] [0/Radio_1] Initializing block control (NOC ID: 0x12AD100000011312) [INFO] [0/DDC_0] Initializing block control (NOC ID: 0xDDC0000000000000) [INFO] [0/DDC_1] Initializing block control (NOC ID: 0xDDC0000000000000) [INFO] [0/DUC_0] Initializing block control (NOC ID: 0xD0C0000000000002) [INFO] [0/DUC_1] Initializing block control (NOC ID: 0xD0C0000000000002) [INFO] [0/FIFO_0] Initializing block control (NOC ID: 0xF1F0000000000000) [INFO] [0/FIFO_1] Initializing block control (NOC ID: 0xF1F0000000000000) [INFO] [0/FIFO_2] Initializing block control (NOC ID: 0xF1F0000000000000) [INFO] [0/FIFO_3] Initializing block control (NOC ID: 0xF1F0000000000000) _____________________________________________________ / | Device: N300-Series Device | _____________________________________________________ | / | | Mboard: ni-n3xx-318F043 | | eeprom_version: 2 | | mpm_version: 3.15.0.0-gaea0e2de | | pid: 16962 | | product: n310 | | rev: 7 | | rpc_connection: remote | | serial: 318F043 | | type: n3xx | | MPM Version: 1.2 | | FPGA Version: 5.3 | | FPGA git hash: fde2a94.clean | | RFNoC capable: Yes | | | | Time sources: internal, external, gpsdo, sfp0 | | Clock sources: external, internal, gpsdo | | Sensors: gps_tpv, gps_locked, ref_locked, fan, gps_sky, temp, gps_gpgga, gps_time | | _____________________________________________________ | | / | | | RX Dboard: A | | | _____________________________________________________ | | | / | | | | RX Frontend: 0 | | | | Name: Magnesium | | | | Antennas: TX/RX, RX2, CAL, LOCAL | | | | Sensors: lo_locked, lowband_lo_locked, ad9371_lo_locked | | | | Freq range: 1.000 to 6000.000 MHz | | | | Gain range all: 0.0 to 75.0 step 0.5 dB | | | | Gain range rfic: 0.0 to 0.0 step 0.0 dB | | | | Gain range dsa: 0.0 to 0.0 step 0.0 dB | | | | Gain range amp: 0.0 to 0.0 step 0.0 dB | | | | Bandwidth range: 20000000.0 to 100000000.0 step 0.0 Hz | | | | Connection Type: IQ | | | | Uses LO offset: No | | | _____________________________________________________ | | | / | | | | RX Frontend: 1 | | | | Name: Magnesium | | | | Antennas: TX/RX, RX2, CAL, LOCAL | | | | Sensors: lo_locked, lowband_lo_locked, ad9371_lo_locked | | | | Freq range: 1.000 to 6000.000 MHz | | | | Gain range all: 0.0 to 75.0 step 0.5 dB | | | | Gain range rfic: 0.0 to 0.0 step 0.0 dB | | | | Gain range dsa: 0.0 to 0.0 step 0.0 dB | | | | Gain range amp: 0.0 to 0.0 step 0.0 dB | | | | Bandwidth range: 20000000.0 to 100000000.0 step 0.0 Hz | | | | Connection Type: IQ | | | | Uses LO offset: No | | | _____________________________________________________ | | | / | | | | RX Codec: A | | | | Name: AD9371 Dual ADC | | | | Gain Elements: None | | _____________________________________________________ | | / | | | RX Dboard: B | | | _____________________________________________________ | | | / | | | | RX Frontend: 0 | | | | Name: Magnesium | | | | Antennas: TX/RX, RX2, CAL, LOCAL | | | | Sensors: lo_locked, lowband_lo_locked, ad9371_lo_locked | | | | Freq range: 1.000 to 6000.000 MHz | | | | Gain range all: 0.0 to 75.0 step 0.5 dB | | | | Gain range rfic: 0.0 to 0.0 step 0.0 dB | | | | Gain range dsa: 0.0 to 0.0 step 0.0 dB | | | | Gain range amp: 0.0 to 0.0 step 0.0 dB | | | | Bandwidth range: 20000000.0 to 100000000.0 step 0.0 Hz | | | | Connection Type: IQ | | | | Uses LO offset: No | | | _____________________________________________________ | | | / | | | | RX Frontend: 1 | | | | Name: Magnesium | | | | Antennas: TX/RX, RX2, CAL, LOCAL | | | | Sensors: lo_locked, lowband_lo_locked, ad9371_lo_locked | | | | Freq range: 1.000 to 6000.000 MHz | | | | Gain range all: 0.0 to 75.0 step 0.5 dB | | | | Gain range rfic: 0.0 to 0.0 step 0.0 dB | | | | Gain range dsa: 0.0 to 0.0 step 0.0 dB | | | | Gain range amp: 0.0 to 0.0 step 0.0 dB | | | | Bandwidth range: 20000000.0 to 100000000.0 step 0.0 Hz | | | | Connection Type: IQ | | | | Uses LO offset: No | | | _____________________________________________________ | | | / | | | | RX Codec: B | | | | Name: AD9371 Dual ADC | | | | Gain Elements: None | | _____________________________________________________ | | / | | | TX Dboard: A | | | _____________________________________________________ | | | / | | | | TX Frontend: 0 | | | | Name: Magnesium | | | | Antennas: TX/RX | | | | Sensors: lo_locked, lowband_lo_locked, ad9371_lo_locked | | | | Freq range: 1.000 to 6000.000 MHz | | | | Gain range all: 0.0 to 65.0 step 0.5 dB | | | | Gain range rfic: 0.0 to 0.0 step 0.0 dB | | | | Gain range dsa: 0.0 to 0.0 step 0.0 dB | | | | Gain range amp: 0.0 to 0.0 step 0.0 dB | | | | Bandwidth range: 20000000.0 to 100000000.0 step 0.0 Hz | | | | Connection Type: IQ | | | | Uses LO offset: No | | | _____________________________________________________ | | | / | | | | TX Frontend: 1 | | | | Name: Magnesium | | | | Antennas: TX/RX | | | | Sensors: lo_locked, lowband_lo_locked, ad9371_lo_locked | | | | Freq range: 1.000 to 6000.000 MHz | | | | Gain range all: 0.0 to 65.0 step 0.5 dB | | | | Gain range rfic: 0.0 to 0.0 step 0.0 dB | | | | Gain range dsa: 0.0 to 0.0 step 0.0 dB | | | | Gain range amp: 0.0 to 0.0 step 0.0 dB | | | | Bandwidth range: 20000000.0 to 100000000.0 step 0.0 Hz | | | | Connection Type: IQ | | | | Uses LO offset: No | | | _____________________________________________________ | | | / | | | | TX Codec: A | | | | Name: AD9371 Dual DAC | | | | Gain Elements: None | | _____________________________________________________ | | / | | | TX Dboard: B | | | _____________________________________________________ | | | / | | | | TX Frontend: 0 | | | | Name: Magnesium | | | | Antennas: TX/RX | | | | Sensors: lo_locked, lowband_lo_locked, ad9371_lo_locked | | | | Freq range: 1.000 to 6000.000 MHz | | | | Gain range all: 0.0 to 65.0 step 0.5 dB | | | | Gain range rfic: 0.0 to 0.0 step 0.0 dB | | | | Gain range dsa: 0.0 to 0.0 step 0.0 dB | | | | Gain range amp: 0.0 to 0.0 step 0.0 dB | | | | Bandwidth range: 20000000.0 to 100000000.0 step 0.0 Hz | | | | Connection Type: IQ | | | | Uses LO offset: No | | | _____________________________________________________ | | | / | | | | TX Frontend: 1 | | | | Name: Magnesium | | | | Antennas: TX/RX | | | | Sensors: lo_locked, lowband_lo_locked, ad9371_lo_locked | | | | Freq range: 1.000 to 6000.000 MHz | | | | Gain range all: 0.0 to 65.0 step 0.5 dB | | | | Gain range rfic: 0.0 to 0.0 step 0.0 dB | | | | Gain range dsa: 0.0 to 0.0 step 0.0 dB | | | | Gain range amp: 0.0 to 0.0 step 0.0 dB | | | | Bandwidth range: 20000000.0 to 100000000.0 step 0.0 Hz | | | | Connection Type: IQ | | | | Uses LO offset: No | | | _____________________________________________________ | | | / | | | | TX Codec: B | | | | Name: AD9371 Dual DAC | | | | Gain Elements: None | | _____________________________________________________ | | / | | | RFNoC blocks on this device: | | | | | | * Replay_0 | | | * Radio_0 | | | * Radio_1 | | | * DDC_0 | | | * DDC_1 | | | * DUC_0 | | | * DUC_1 | | | * FIFO_0 | | | * FIFO_1 | | | * FIFO_2 | | | * FIFO_3
usrp_n310_fpga_RFNOC_XG.rpt
Description: Binary data
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
