Hi Sam, Since I have rebooted my machine and SDR, issue not seen. I will try
to reproduce and share you the results.BR,Santosh
On Friday, January 10, 2020, 3:46:19 PM GMT, Sam Reiter
<sam.rei...@ettus.com> wrote:
Santosh,
Could you send the output of
ip a
On you machine with the X300 connected?
Sam
On Fri, Jan 10, 2020 at 9:16 AM voonna santosh via USRP-users
<usrp-users@lists.ettus.com> wrote:
Hi There, I have just updated to 3.14.1 and experiencing the following issue.
The system starts well, then there would be couple of underflows (even at less
sampling rates) and the following error is shown. In this case I don't see
anything on the scope.
I have restarted SDR and my PC, then it is working well.
Command used:
./tx_samples_from_file --args addr=192.168.40.2 --file
/home/svoonna/repo/test_files/test_file_SW_Samples_1MHz_28G.bin --type short
--spb 3640 --rate 50e6 --freq 60e6 --gain 0 --ant TX/RX --subdev A:0 --bw 40
--ref internal --repeat --lo_off 80000000
[ERROR] [X300] 192.168.40.2: x300 fw communication failure #1EnvironmentError:
IOError: x300 fw poke32 - reply timed out
BR,Santosh
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
