Santosh, Could you send the output of
*ip a* On you machine with the X300 connected? Sam On Fri, Jan 10, 2020 at 9:16 AM voonna santosh via USRP-users < usrp-users@lists.ettus.com> wrote: > Hi There, > I have just updated to 3.14.1 and experiencing the following issue. The > system starts well, then there would be couple of underflows (even at less > sampling rates) and the following error is shown. In this case I don't see > anything on the scope. > > I have restarted SDR and my PC, then it is working well. > > Command used: > ./tx_samples_from_file --args addr=192.168.40.2 --file > /home/svoonna/repo/test_files/test_file_SW_Samples_1MHz_28G.bin --type > short --spb 3640 --rate 50e6 --freq 60e6 --gain 0 --ant TX/RX --subdev A:0 > --bw 40 --ref internal --repeat --lo_off 80000000 > > *[ERROR] [X300] 192.168.40.2 <http://192.168.40.2>: x300 fw communication > failure #1* > *EnvironmentError: IOError: x300 fw poke32 - reply timed out* > > BR, > Santosh > > _______________________________________________ > USRP-users mailing list > USRP-users@lists.ettus.com > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com >
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
