Maybe the contents of this file will point you in the right direction? https://github.com/EttusResearch/meta-ettus/blob/master/meta-e31x/recipes-support/uhd/uhd-fpga-images_git.bbappend
On Fri, Jun 28, 2019 at 1:19 PM Marcus D. Leech via USRP-users < usrp-users@lists.ettus.com> wrote: > On 06/28/2019 04:06 PM, d.des via USRP-users wrote: > > Marcus Leach wrote: > >> See this thread here: > > > http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/2016-March/046784.html > > > > > > I understand how it's supposed to work, and it's always worked that way > > before including in the outdated > > http://files.ettus.com/e3xx_images/e3xx-release-4/ setup. With this new > > image and toolchain (from > > > http://files.ettus.com/binaries/cache/e3xx/meta-ettus-v3.15.0.0-e310_prerelease/ > > ), though, I can't seen to find out where uhd is getting the image it's > > loading let alone change it. No matter what files are in standard > > images path or $UHD_IMAGES_DIR or what I tell args="fpga="... > > uhd_usrp_probe gives the exact same output that indicates 1 DDC and one > > DUC. > > > > logging doesn't seem to be working (maybe related to the first error) > > so I've been attempting to use print statements (see "ddd" comments) to > > trace the long and winding path that "args" takes as it makes its way > > to MPM and eventually the function loads the fpga. I haven't found it > > yet. I've gone so far as to delete all the existing fpga images I can > > find but still uhd finds this one. That's what made me think that it > > had been somehow baked into the uhd executable. > What happens if you specify an fpga image that doesn't actually exist? > Does it error out? > > > > > > Here are a few outputs, first for uhd_usrp_probe and then for > > uhd_config_info: > > > > root@ni-e31x-*******:~/newinstall# uhd_usrp_probe > > Error opening log file: basic_ios::clear: iostream error > > [INFO] [UHD] linux; GNU C++ version 7.3.0; Boost_106600; > > UHD_3.15.0.HEAD-0-g6563c537 > > ddd in rpc.hpp mb_args= > > [ERROR] [UHD] Device discovery error: AssertionError: > > libusb_init(&_context) == 0 > > in libusb_session_impl::libusb_session_impl() > > at /home/mal/315/src/uhd/host/lib/transport/libusb1_base.cpp:36 > > > > [ERROR] [UHD] Device discovery error: AssertionError: > > libusb_init(&_context) == 0 > > in libusb_session_impl::libusb_session_impl() > > at /home/mal/315/src/uhd/host/lib/transport/libusb1_base.cpp:36 > > > > [ERROR] [UHD] Device discovery error: AssertionError: > > libusb_init(&_context) == 0 > > in libusb_session_impl::libusb_session_impl() > > at /home/mal/315/src/uhd/host/lib/transport/libusb1_base.cpp:36 > > > > [INFO] [MPMD] Initializing 1 device(s) in parallel with args: > > mgmt_addr=127.0.0.1,type=e3xx,product=e310_sg1,serial=309C7C2,claimed=F > > alse > > > > [ddd > > mb_args=mgmt_addr=127.0.0.1,type=e3xx,product=e310_sg1,serial=309C7C2,c > > laimed=False > > INFO] [MPMD dddddd in mpmd_mboard_impl.cpp mb_args=49601 size=4 > > ] ddd in rpc.hpp mb_args= > > MPMD Claiming mboard 0 > > [INFO] [MPMD ddd] Device args: > > `mgmt_addr=127.0.0.1,type=e3xx,product=e310_sg1,serial=309C7C2,claimed= > > False'. RPC address: 127.0.0.1 > > ddd in mpmd_mboard_impl.cpp mb_args=49601 size=4 > > ddd in rpc.hpp mb_args= > > [INFO] [MPM.PeriphManager] Found 1 daughterboard(s). > > [INFO] [MPMD ddd] just called setup_mb > > > > [INFO] [MPMD ddd] just called init_property_tree > > > > [INFO] [MPMD] Mboard 0 reports 1 crossbar(s). > > > > > > [INFO] [MPMD ddd] Enumerating RFNoC blocks for xbar 0. Total blocks: 3 > > Base port: 1 Local address: 2 > > [INFO] [0/Radio_0] Initializing block control (NOC ID: > > 0x12AD100000003310) > > [INFO] [MPM.PeriphManager] init() called with device args > > `mgmt_addr=127.0.0.1,product=e310_sg1'. > > [INFO] [0/DDC_0] Initializing block control (NOC ID: > > 0xDDC0000000000000) > > [INFO] [0/DUC_0] Initializing block control (NOC ID: > > 0xD0C0000000000002) > > [INFO] [MPMD ddd] just called setup_rfnoc_blocks > > > > [INFO] [0/Radio_0] RX freq = 2.4e+09 > > [INFO] [0/Radio_0] RX band = 6 > > [INFO] [0/Radio_0] RX SW1 = 5 > > [INFO] [0/Radio_0] RX SWC = 0 > > [INFO] [0/Radio_0] RX SWB = 1 > > [INFO] [0/Radio_0] RX VCRX_SW = 1 > > [INFO] [0/Radio_0] RX VCTXRX_SW = 0 > > [INFO] [0/Radio_0] RX freq = 2.4e+09 > > [INFO] [0/Radio_0] RX band = 6 > > [INFO] [0/Radio_0] RX SW1 = 5 > > [INFO] [0/Radio_0] RX SWC = 0 > > [INFO] [0/Radio_0] RX SWB = 1 > > [INFO] [0/Radio_0] RX VCRX_SW = 1 > > [INFO] [0/Radio_0] RX VCTXRX_SW = 0 > > [INFO] [0/Radio_0] RX freq = 2.4e+09 > > [INFO] [0/Radio_0] RX band = 6 > > [INFO] [0/Radio_0] RX SW1 = 5 > > [INFO] [0/Radio_0] RX SWC = 0 > > [INFO] [0/Radio_0] RX SWB = 1 > > [INFO] [0/Radio_0] RX VCRX_SW = 1 > > [INFO] [0/Radio_0] RX VCTXRX_SW = 0 > > [INFO] [0/Radio_0] RX freq = 2.4e+09 > > [INFO] [0/Radio_0] RX band = 6 > > [INFO] [0/Radio_0] RX SW1 = 5 > > [INFO] [0/Radio_0] RX SWC = 0 > > [INFO] [0/Radio_0] RX SWB = 1 > > [INFO] [0/Radio_0] RX VCRX_SW = 1 > > [INFO] [0/Radio_0] RX VCTXRX_SW = 0 > > [INFO] [0/Radio_0] RX freq = 2.4e+09 > > [INFO] [0/Radio_0] RX band = 6 > > [INFO] [0/Radio_0] RX SW1 = 5 > > [INFO] [0/Radio_0] RX SWC = 0 > > [INFO] [0/Radio_0] RX SWB = 1 > > [INFO] [0/Radio_0] RX VCRX_SW = 1 > > [INFO] [0/Radio_0] RX VCTXRX_SW = 0 > > [INFO] [0/Radio_0] RX freq = 2.4e+09 > > [INFO] [0/Radio_0] RX band = 6 > > [INFO] [0/Radio_0] RX SW1 = 5 > > [INFO] [0/Radio_0] RX SWC = 0 > > [INFO] [0/Radio_0] RX SWB = 1 > > [INFO] [0/Radio_0] RX VCRX_SW = 1 > > [INFO] [0/Radio_0] RX VCTXRX_SW = 0 > > [INFO] [0/Radio_0] Performing CODEC loopback test... > > [INFO] [0/Radio_0] CODEC loopback test passed > > [INFO] [0/Radio_0] Performing CODEC loopback test... > > [INFO] [0/Radio_0] CODEC loopback test passed > > [INFO] [MPMD ddd] just called setup_rpc_blocks > > > > [INFO] [MPMD ddd] done > > > > _____________________________________________________ > > / > > | Device: E300-Series Device > > | _____________________________________________________ > > | / > > | | Mboard: ni-e31x-309C7C2F > > | | mpm_version: 3.15.0.git-g6563c537 > > | | pid: 30674 > > | | product: e310_sg1 > > | | rev: 4 > > | | rpc_connection: local > > | | serial: 309C7C2 > > | | type: e3xx > > | | MPM Version: 1.2 > > | | FPGA Version: 1.0 > > | | FPGA git hash: f52a643.clean > > | | RFNoC capable: Yes > > | | > > | | Time sources: internal, external, gpsdo > > | | Clock sources: internal > > | | Sensors: temp_mb, temp_fpga, ref_locked > > | | _____________________________________________________ > > | | / > > | | | RX Dboard: A > > | | | _____________________________________________________ > > | | | / > > | | | | RX Frontend: 0 > > | | | | Name: E3xx > > | | | | Antennas: RX2, TX/RX > > | | | | Sensors: lo_locked, rssi, lo_lock, ad9361_temperature > > | | | | Freq range: 70.000 to 6000.000 MHz > > | | | | Gain range PGA: 0.0 to 76.0 step 1.0 dB > > | | | | Bandwidth range: 20000000.0 to 40000000.0 step 0.0 Hz > > | | | | Connection Type: IQ > > | | | | Uses LO offset: No > > | | | _____________________________________________________ > > | | | / > > | | | | RX Frontend: 1 > > | | | | Name: E3xx > > | | | | Antennas: RX2, TX/RX > > | | | | Sensors: lo_locked, rssi, lo_lock, ad9361_temperature > > | | | | Freq range: 70.000 to 6000.000 MHz > > | | | | Gain range PGA: 0.0 to 76.0 step 1.0 dB > > | | | | Bandwidth range: 20000000.0 to 40000000.0 step 0.0 Hz > > | | | | Connection Type: IQ > > | | | | Uses LO offset: No > > | | | _____________________________________________________ > > | | | / > > | | | | RX Codec: A > > | | | | Name: AD9361 Dual ADC > > | | | | Gain Elements: None > > | | _____________________________________________________ > > | | / > > | | | TX Dboard: A > > | | | _____________________________________________________ > > | | | / > > | | | | TX Frontend: 0 > > | | | | Name: E3xx > > | | | | Antennas: TX/RX > > | | | | Sensors: lo_locked, ad9361_temperature > > | | | | Freq range: 47.000 to 6000.000 MHz > > | | | | Gain range PGA: 0.0 to 89.8 step 0.2 dB > > | | | | Bandwidth range: 20000000.0 to 40000000.0 step 0.0 Hz > > | | | | Connection Type: IQ > > | | | | Uses LO offset: No > > | | | _____________________________________________________ > > | | | / > > | | | | TX Frontend: 1 > > | | | | Name: E3xx > > | | | | Antennas: TX/RX > > | | | | Sensors: lo_locked, ad9361_temperature > > | | | | Freq range: 47.000 to 6000.000 MHz > > | | | | Gain range PGA: 0.0 to 89.8 step 0.2 dB > > | | | | Bandwidth range: 20000000.0 to 40000000.0 step 0.0 Hz > > | | | | Connection Type: IQ > > | | | | Uses LO offset: No > > | | | _____________________________________________________ > > | | | / > > | | | | TX Codec: A > > | | | | Name: AD9361 Dual DAC > > | | | | Gain Elements: None > > | | _____________________________________________________ > > | | / > > | | | RFNoC blocks on this device: > > | | | > > | | | * Radio_0 > > | | | * DDC_0 > > | | | * DUC_0 > > > > > > first, using my und cross-compiled build: > > > > root@ni-e31x-*******:~/newinstall# uhd_config_info --print-all > > UHD 3.15.0.HEAD-0-g6563c537 > > Build date: Thu, 27 Jun 2019 13:41:23 > > C compiler: GNU 7.3.0 > > C++ compiler: GNU 7.3.0 > > C flags: -DUHD_RFNOC_ENABLED -DHAVE_CONFIG_H -DUHD_LOG_MIN_LEVEL=1 > > -DUHD_LOG_CONSOLE_LEVEL=2 -DUHD_LOG_FILE_LEVEL=2 > > -DUHD_LOG_CONSOLE_COLOR -DHAVE_LIBERIO -O2 -pipe -g -feliminate-unused- > > debug-types > > C++ flags: -DUHD_RFNOC_ENABLED -DHAVE_CONFIG_H -DUHD_LOG_MIN_LEVEL=1 > > -DUHD_LOG_CONSOLE_LEVEL=2 -DUHD_LOG_FILE_LEVEL=2 > > -DUHD_LOG_CONSOLE_COLOR -DHAVE_LIBERIO -O2 -pipe -g -feliminate-unused- > > debug-types -fvisibility=hidden -fvisibility-inlines-hidden > > Enabled components: LibUHD, LibUHD - C API, LibUHD - Python API, > > Examples, Utils, Tests, LIBERIO, USB, B100, B200, USRP1, USRP2, X300, > > N230, MPMD, N300, N320, E320, E300, OctoClock > > Install prefix: /usr/local > > Boost version: 1.66 > > Libusb version: 1.0.23 > > Package path: /usr/local > > Images directory: /home/root/newinstall/usr/local/share/uhd/images > > ABI version string: 3.15.0 > > > > then, using the version of uhd on the image from a fresh boot: > > root@ni-e31x-********:~# uhd_config_info --print-all > > UHD 3.15.0.git-0-g6563c537 > > Build date: Fri, 24 May 2019 20:20:44 > > C compiler: GNU 7.3.0 > > C++ compiler: GNU 7.3.0 > > C flags: -DUHD_RFNOC_ENABLED -DHAVE_CONFIG_H -DUHD_LOG_MIN_LEVEL=1 > > -DUHD_LOG_CONSOLE_LEVEL=2 -DUHD_LOG_FILE_LEVEL=2 > > -DUHD_LOG_CONSOLE_COLOR -DHAVE_LIBERIO -march=armv7-a -marm -mfpu=neon > > -mfloat-abi=hard -mcpu=cortex-a9 --sysroot=/home/oe-builder/build/tmp- > > glibc/work/cortexa9hf-neon-oe-linux-gnueabi/uhd/3.15.0.0- > > e310_prerelease/recipe-sysroot -O2 -pipe -g -feliminate-unused-debug- > > types -fdebug-prefix-map=/home/oe-builder/build/tmp- > > glibc/work/cortexa9hf-neon-oe-linux-gnueabi/uhd/3.15.0.0- > > e310_prerelease=/usr/src/debug/uhd/3.15.0.0-e310_prerelease -fdebug- > > prefix-map=/home/oe-builder/build/tmp-glibc/work/cortexa9hf-neon-oe- > > linux-gnueabi/uhd/3.15.0.0-e310_prerelease/recipe-sysroot= -fdebug- > > prefix-map=/home/oe-builder/build/tmp-glibc/work/cortexa9hf-neon-oe- > > linux-gnueabi/uhd/3.15.0.0-e310_prerelease/recipe-sysroot-native= - > > march=armv7-a -marm -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a9 > > --sysroot=/home/oe-builder/build/tmp-glibc/work/cortexa9hf-neon-oe- > > linux-gnueabi/uhd/3.15.0.0-e310_prerelease/recipe-sysroot > > C++ flags: -DUHD_RFNOC_ENABLED -DHAVE_CONFIG_H -DUHD_LOG_MIN_LEVEL=1 > > -DUHD_LOG_CONSOLE_LEVEL=2 -DUHD_LOG_FILE_LEVEL=2 > > -DUHD_LOG_CONSOLE_COLOR -DHAVE_LIBERIO -march=armv7-a -marm -mfpu=neon > > -mfloat-abi=hard -mcpu=cortex-a9 --sysroot=/home/oe-builder/build/tmp- > > glibc/work/cortexa9hf-neon-oe-linux-gnueabi/uhd/3.15.0.0- > > e310_prerelease/recipe-sysroot -O2 -pipe -g -feliminate-unused-debug- > > types -fdebug-prefix-map=/home/oe-builder/build/tmp- > > glibc/work/cortexa9hf-neon-oe-linux-gnueabi/uhd/3.15.0.0- > > e310_prerelease=/usr/src/debug/uhd/3.15.0.0-e310_prerelease -fdebug- > > prefix-map=/home/oe-builder/build/tmp-glibc/work/cortexa9hf-neon-oe- > > linux-gnueabi/uhd/3.15.0.0-e310_prerelease/recipe-sysroot= -fdebug- > > prefix-map=/home/oe-builder/build/tmp-glibc/work/cortexa9hf-neon-oe- > > linux-gnueabi/uhd/3.15.0.0-e310_prerelease/recipe-sysroot-native= - > > fvisibility-inlines-hidden -march=armv7-a -marm -mfpu=neon -mfloat- > > abi=hard -mcpu=cortex-a9 --sysroot=/home/oe-builder/build/tmp- > > glibc/work/cortexa9hf-neon-oe-linux-gnueabi/uhd/3.15.0.0- > > e310_prerelease/recipe-sysroot -fvisibility=hidden -fvisibility- > > inlines-hidden > > Enabled components: LibUHD, LibUHD - C API, Examples, Utils, Tests, > > LIBERIO, USB, GPSD, MPMD, N300, N320, E320, E300, OctoClock > > Install prefix: /usr > > Boost version: 1.66 > > Libusb version: 1.0.23 > > Package path: /usr > > Images directory: > > ABI version string: 3.15.0 > > > > > > > > > > _______________________________________________ > > USRP-users mailing list > > USRP-users@lists.ettus.com > > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com > > > _______________________________________________ > USRP-users mailing list > USRP-users@lists.ettus.com > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com >
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
