Philip,
They have unique addresses (10.95 and 10.45). It is really weird that when I am on the E310, and set the ip-addr to himself, that he would even look off the device.... They both have hostnames and they are not similar to each other at all. ________________________________ From: Philip Balister <phi...@balister.org> Sent: Friday, June 7, 2019 11:10 AM To: Jason Matusiak; Ettus Mail List Subject: Re: [USRP-users] E320 hogging the network Check each ones ip address, likely by running ifconfig. In the back of my mind, I recall something like this in the E100 days. Do they have the same hostname? Philip On 06/07/2019 07:37 AM, Jason Matusiak via USRP-users wrote: > It looks like I am misunderstanding something with how the E320 handles the > network. > > > I have my E320 on my subnet with the sfp0 assigned to 10.45 (instead of the > default 10.2). I can ssh into it and things seem to run fine in embedded > mode. > > > Now, if I ssh onto an E312 that is on the same network (IP 10.95), it doesn't > work right as long as the E320 is plugged in. When I do a probe or run any > other UHD-type commands on the E310, it seems to always talk to the E320 > first and it screws everything up. It doesn't matter if I put the E310's > address into the command or not, the E320 responds. I also remember seeing > this occur when I was on my host machine running commands (the E320 bullied > its way into being the main attraction). > > > My current work-around is to unplug Ethernet from the E320, run my command on > the E310, plug back into the E320, then run its command. This seems to allow > things to work as I intended, but is obviously not ideal and is fairly > difficult to do when devices are remote. > > > So what am I missing here? > > > > _______________________________________________ > USRP-users mailing list > USRP-users@lists.ettus.com > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com USRP-users Info Page - Ettus<http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com> lists.ettus.com To see the collection of prior postings to the list, visit the USRP-users Archives.. Using USRP-users: To post a message to all the list members, send email to usrp-users@lists.ettus.com. You can subscribe to the list, or change your existing subscription, in the sections below. >
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
