Hi Marc, What version of UHD are you using? If you're not running with any 3.14.0.0-rcX release, can you please try v3.14.0.0-rc3 ?
Regards, Nate Temple On Tue, Mar 12, 2019 at 10:37 AM Marc Lichtman via USRP-users < usrp-users@lists.ettus.com> wrote: > Hey, > > I'm having issues connecting to a N310 with stock firmware. Its eth0 port > works fine; it can get an IP address and I can even SSH into it from a > different (host) computer, but when I set up a second ethernet port on my > host with a static IP of 192.168.10.1 and mask 255.255.255.0, and connect > it to SFP0 on the N310, pinging 192.168.10.2 fails with destination > unreachable. I'm using the transceiver that came with it, and the lights > above the SFP0 port on the USRP are on (one is solid, one flashes on > occasion). I verified my host was using 192.168.10.1 on the port connected > to SFP0. > > Some possible clues- When I run uhd_find_devices on the host, the N310 > shows up, but said "Reachable: No" (which is a new field to me). When I > SSH into the N310 and do ifconfig, it shows the eth0 with its assigned IP > address, and it shows sfp1 but with no IP address, and no sfp0/sfp2 (not > sure how its suppose to be labeled). I was expected to do ifconfig and see > sfp0 showing 192.168.10.2 and sfp1 with 192.168.20.2 since it's static. > > Any help would be greatly appreciated! Thanks! > > -Marc > _______________________________________________ > USRP-users mailing list > USRP-users@lists.ettus.com > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com >
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
