Hey, I'm having issues connecting to a N310 with stock firmware. Its eth0 port works fine; it can get an IP address and I can even SSH into it from a different (host) computer, but when I set up a second ethernet port on my host with a static IP of 192.168.10.1 and mask 255.255.255.0, and connect it to SFP0 on the N310, pinging 192.168.10.2 fails with destination unreachable. I'm using the transceiver that came with it, and the lights above the SFP0 port on the USRP are on (one is solid, one flashes on occasion). I verified my host was using 192.168.10.1 on the port connected to SFP0.
Some possible clues- When I run uhd_find_devices on the host, the N310 shows up, but said "Reachable: No" (which is a new field to me). When I SSH into the N310 and do ifconfig, it shows the eth0 with its assigned IP address, and it shows sfp1 but with no IP address, and no sfp0/sfp2 (not sure how its suppose to be labeled). I was expected to do ifconfig and see sfp0 showing 192.168.10.2 and sfp1 with 192.168.20.2 since it's static. Any help would be greatly appreciated! Thanks! -Marc
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
