According to NI documentation the B200mini is not supported by LabView directly. You may be able to write HDL for the B200mini but it will be fully custom, as others have said. - Martin K
On Thu, Jan 10, 2019 at 5:17 AM Maitry Raval via USRP-users <[email protected]> wrote: > > Hello, > > sorry, I have just started to work with USRP-B200 mini and GNU radio, and I > have implemented channel coding/ decoding and modulation-demodulation for > continuous transmission/reception in GNU radio.and what i understand is when > I am doing all these dsp in GNU radio with host computer, it uses USRP-b200 > mini as a pass through by using UHD drivers(sink and source), and I can > transmit and receive through GNU radio. and I think, for embedded USRP with E > series can run these radio application(GNU) on board itself without the use > of host computer, which is not possible with USRP-B200 mini. and through > labview,it is possible to parses block diagram and converts the code to text > based VHDL if I done the same channel coding/decoding and mod-demod in > labview as per my application, > so my question is, Is it possible that USRP-B200 mini is labview supported or > I need to do it through direct VHDL-verilog? > > > > With Best Regards, > Maitry Raval, > _______________________________________________ USRP-users mailing list [email protected] http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
