Hey Corey, yep, when updating your UHD you also need to update your fpga-src submodule; `git submodule update`. If you have changes you want to preserve: Standard git methods apply; just make a branch in the fpga- src submodule to contain your changes, then update the submodule, then merge in your branch.
Best regards, Marcus On Mon, 2018-10-08 at 19:42 -0600, Corey Hahn via USRP-users wrote: > I did notice that UHD went from 4.0 to 3.14 is this a problem? Does > the getting started wiki need an extra step to choose the > branch/commit? > > On Mon, Oct 8, 2018 at 2:33 PM Rob Kossler <rkoss...@nd.edu> wrote: > > Perhaps you are using fpga-src on 'master' rather than on commit > > 'ebf5eed' which is the one paired with UHD 'master'? > > > > Rob > > > > On Sun, Oct 7, 2018 at 10:22 PM Corey Hahn via USRP-users < > > usrp-users@lists.ettus.com> wrote: > > > Been using uhd/rfnoc for 9 months now with no comparability > > > problems i couldn't fix. > > > My last devel version was from the beginning of June. > > > Upgraded rfnoc and rebuilt from scratch the pybombs rfnoc > > > packages via the getting started wiki. > > > I have an x310 USRP > > > Redid the place and route with the new rfnoc build. Now i get > > > the dreaded comparability mismatch. In the past this was fixed > > > because i built the bit file or ran with uhd of two different > > > versions. This is on one machine and should not have this > > > problem. Where do i start debugging this problem? > > > > > > root@optical-cuda1604-20181007-srn21:~/rfnoc# uhd_usrp_probe > > > [INFO] [UHD] linux; GNU C++ version 5.4.0 20160609; Boost_105800; > > > UHD_3.14.0.0-110-g6af6ac32 > > > [INFO] [X300] X300 initialization sequence... > > > Error: RuntimeError: Expected FPGA compatibility number 35, but > > > got 36: > > > The FPGA image on your device is not compatible with this host > > > code build. > > > Download the appropriate FPGA images for this version of UHD. > > > Please run: > > > > > > "/root/rfnoc/lib/uhd/utils/uhd_images_downloader.py" > > > > > > Then burn a new image to the on-board flash storage of your > > > USRP X3xx device using the image loader utility. Use this > > > command: > > > > > > "/root/rfnoc/bin/uhd_image_loader" -- > > > args="type=x300,addr=192.168.40.2" > > > > > > For more information, refer to the UHD manual: > > > > > > http://files.ettus.com/manual/page_usrp_x3x0.html#x3x0_flash > > > root@optical-cuda1604-20181007-srn21:~/rfnoc# > > > > > > _______________________________________________ > > > USRP-users mailing list > > > USRP-users@lists.ettus.com > > > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com > > _______________________________________________ > USRP-users mailing list > USRP-users@lists.ettus.com > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com _______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
