Perhaps you are using fpga-src on 'master' rather than on commit 'ebf5eed' which is the one paired with UHD 'master'?
Rob On Sun, Oct 7, 2018 at 10:22 PM Corey Hahn via USRP-users < usrp-users@lists.ettus.com> wrote: > Been using uhd/rfnoc for 9 months now with no comparability problems i > couldn't fix. > My last devel version was from the beginning of June. > Upgraded rfnoc and rebuilt from scratch the pybombs rfnoc packages via the > getting started wiki. > I have an x310 USRP > Redid the place and route with the new rfnoc build. Now i get the dreaded > comparability mismatch. In the past this was fixed because i built the bit > file or ran with uhd of two different versions. This is on one machine and > should not have this problem. Where do i start debugging this problem? > > root@optical-cuda1604-20181007-srn21:~/rfnoc# uhd_usrp_probe > [INFO] [UHD] linux; GNU C++ version 5.4.0 20160609; Boost_105800; > UHD_3.14.0.0-110-g6af6ac32 > [INFO] [X300] X300 initialization sequence... > Error: RuntimeError: Expected FPGA compatibility number 35, but got 36: > The FPGA image on your device is not compatible with this host code build. > Download the appropriate FPGA images for this version of UHD. > Please run: > > "/root/rfnoc/lib/uhd/utils/uhd_images_downloader.py" > > Then burn a new image to the on-board flash storage of your > USRP X3xx device using the image loader utility. Use this command: > > "/root/rfnoc/bin/uhd_image_loader" --args="type=x300,addr=192.168.40.2" > > For more information, refer to the UHD manual: > > http://files.ettus.com/manual/page_usrp_x3x0.html#x3x0_flash > root@optical-cuda1604-20181007-srn21:~/rfnoc# > > _______________________________________________ > USRP-users mailing list > USRP-users@lists.ettus.com > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com >
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
